Defence Government Departments Closing in 11 days TDR #57938954

Bids Are invited for Custom Bid For Services - Establishment Of Officers Tea Room And Pantry For Ftsu(Chn) In Afloat Support Complex(Asc) At Chpa - Setting Up Of, Erection And Alignment Of Ms Structure Of Size 10 M Length × 06 M Width × 03 M Height I

Issued by Government Departments · Chennai, Tamil Nadu
Tender Value
16.77 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
11 days left
EMD
50315
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Chennai → Tamil Nadu
EMD Exemption
Available
Quantity
1

Project Description

Bids Are invited for Custom Bid For Services - Establishment Of Officers Tea Room And Pantry For Ftsu(Chn) In Afloat Support Complex(Asc) At Chpa - Setting Up Of, Erection And Alignment Of Ms Structure Of Size 10 M Length × 06 M Width × 03 M Height Including Provision Of Three Doors And One Partition By Using Zinc Coated Ms Hollow Section Of 80 Mm × 80 Mm For Primary Load Bearing Columns And Main Beams, While 40 Mm × 40 Mm Sections Shall Be Used For Secondary Framing Members Such As Purlins, Bracing Or Internal Partitioning. Includes Planning, Material Preparation, Joining, Assembly And Alignment To Ensure Structural Strength. Design Shall Account For Self-Weight, Gypsum/Pvc Ceiling And Wall Cladding, Structural Loads And Potential Seismic Forces. , Providing And Placement Of 12 Mm Thick Superior Quality Chemical Pressure Treated Edge-Glued Finger Jointed Iso Specification Rubberwood (Or Equivalent) Vertical Panelling Of 300 Mm With 10 Mm Tongue And Groove. Timber Framework On Ms Square Pipes Fixed With Screws/Adhesive Using Hdhmr Board/Runners Of Size 50 Mm (±5 Mm) × 18 Mm (±2 Mm). Horizontal Frame Spacing: 150 Mm – 600 Mm – 600 Mm. Vertical Frame From Bottom: 375 Mm Height And 600 Mm Span. Rubberwood Skirting On Top Panel. Entire Surface To Be Sanded (60 & 80 Grit), Shellac/Berger Filler Applied With Ncd Thinner, Chalk Putty Applied On Nailing Areas, Sanded With 120 Grit, Wood Sealer Applied And Rubbed With 320 Grit, Followed By Melamine Spray Polish For Shine, Finish And Durability. , Providing And Fixing False Ceiling At All Heights Including Framework Of Galvanized Ms Special Sections (Zinc Coating 120 G/Sqm, Conforming To Is:277) Consisting Of Angle Cleats And Ceiling Boards (590 Mm × 580 Mm) Which Shall Be Asbestos-Free, Non-Cementitious Lightweight Calcium Silicate Reinforced With Natural Fibres, Free From Harmful Or Toxic Ingredients. , Providing And Placement Of Polyvinyl Chloride (Pvc) Louvers. Louvers Shall Be Waterproof And Moisture Resistant. , Central Table Made Of Superior Quality Chemical Pressure Treated Edge-Glued Finger Jointed Iso Specification Rubberwood Or Equivalent Panels Including Melamine Polishing. Size: Length – 900 Mm, Width – 600 Mm, Height – 450 Mm. , 06-Seater Dining Table With Cushion Chair Made Of Superior Quality Chemical Pressure Treated Edge-Glued Finger Jointed Iso Specification Rubberwood Or Equivalent Panels Including Melamine Polishing. Size: Length – 1500 Mm, Width – 900 Mm, Height – 750 Mm. , Magazine Rack Made Of Superior Quality Chemical Pressure Treated Edge-Glued Finger Jointed Iso Specification Rubberwood Or Equivalent Panels Including Melamine Polishing. Size: Length – 750 Mm, Width – 300 Mm, Height – 1050 Mm. , Pantry Setup With Granite Top Table Including Stainless Steel Sink, Pantry Accessories, Storage Rack And Shutters. Size: Length – 4800 Mm, Width – 600 Mm, Height – 750 Mm. , Led Square Type Light Including Laying Of Cable With Casing And Capping. , Refabrication Of 16-Seater Sofa Including Replacement Of Rexine And Foam Cushion. , Beautification Of Outside Area Including Wooden Boxes For Natural Plants And Pebbles.

BOQ

Sl. No. Item TitleItem Description
1Setting up of, erection and alignment of MS structure of size 10 M length × 06 M width × 03 M height including provision of three doors and one partition by using zinc coated MS hollow section of 80 mm × 80 mm for primary load bearing columns and main beams, while 40 mm × 40 mm sections shall be used for secondary framing members such as purlins, bracing or internal partitioning. Includes planning, material preparation, joining, assembly and alignment to ensure structural strength. Design shall account for self-weight, gypsum/PVC ceiling and wall cladding, structural loads and potential seismic forces.Setting up of, erection and alignment of MS structure of size 10 M length × 06 M width × 03 M height including provision of three doors and one partition by using zinc coated MS hollow section of 80 mm × 80 mm for primary load bearing columns and main beams, while 40 mm × 40 mm sections shall be used for secondary framing members such as purlins, bracing or internal partitioning. Includes planning, material preparation, joining, assembly and alignment to ensure structural strength. Design shall account for self-weight, gypsum/PVC ceiling and wall cladding, structural loads and potential seismic forces.
2Providing and placement of 12 mm thick superior quality chemical pressure treated edge-glued finger jointed ISO specification rubberwood (or equivalent) vertical panelling of 300 mm with 10 mm tongue and groove. Timber framework on MS square pipes fixed with screws/adhesive using HDHMR board/runners of size 50 mm (±5 mm) × 18 mm (±2 mm). Horizontal frame spacing: 150 mm – 600 mm – 600 mm. Vertical frame from bottom: 375 mm height and 600 mm span. Rubberwood skirting on top panel. Entire surface to be sanded (60 & 80 grit), shellac/Berger filler applied with NCD thinner, chalk putty applied on nailing areas, sanded with 120 grit, wood sealer applied and rubbed with 320 grit, followed by melamine spray polish for shine, finish and durability.Providing and placement of 12 mm thick superior quality chemical pressure treated edge-glued finger jointed ISO specification rubberwood (or equivalent) vertical panelling of 300 mm with 10 mm tongue and groove. Timber framework on MS square pipes fixed with screws/adhesive using HDHMR board/runners of size 50 mm (±5 mm) × 18 mm (±2 mm). Horizontal frame spacing: 150 mm – 600 mm – 600 mm. Vertical frame from bottom: 375 mm height and 600 mm span. Rubberwood skirting on top panel. Entire surface to be sanded (60 & 80 grit), shellac/Berger filler applied with NCD thinner, chalk putty applied on nailing areas, sanded with 120 grit, wood sealer applied and rubbed with 320 grit, followed by melamine spray polish for shine, finish and durability.
3Providing and fixing false ceiling at all heights including framework of galvanized MS special sections (zinc coating 120 g/sqm, conforming to IS:277) consisting of angle cleats and ceiling boards (590 mm × 580 mm) which shall be asbestos-free, non-cementitious lightweight calcium silicate reinforced with natural fibres, free from harmful or toxic ingredients.Providing and fixing false ceiling at all heights including framework of galvanized MS special sections (zinc coating 120 g/sqm, conforming to IS:277) consisting of angle cleats and ceiling boards (590 mm × 580 mm) which shall be asbestos-free, non-cementitious lightweight calcium silicate reinforced with natural fibres, free from harmful or toxic ingredients.
4Providing and placement of Polyvinyl Chloride (PVC) louvers. Louvers shall be waterproof and moisture resistant.Providing and placement of Polyvinyl Chloride (PVC) louvers. Louvers shall be waterproof and moisture resistant.
5Central Table made of superior quality chemical pressure treated edge-glued finger jointed ISO specification rubberwood or equivalent panels including melamine polishing. Size: Length – 900 mm, Width – 600 mm, Height – 450 mm.Central Table made of superior quality chemical pressure treated edge-glued finger jointed ISO specification rubberwood or equivalent panels including melamine polishing. Size: Length – 900 mm, Width – 600 mm, Height – 450 mm.
606-Seater Dining Table with Cushion Chair made of superior quality chemical pressure treated edge-glued finger jointed ISO specification rubberwood or equivalent panels including melamine polishing. Size: Length – 1500 mm, Width – 900 mm, Height – 750 mm.06-Seater Dining Table with Cushion Chair made of superior quality chemical pressure treated edge-glued finger jointed ISO specification rubberwood or equivalent panels including melamine polishing. Size: Length – 1500 mm, Width – 900 mm, Height – 750 mm.
7Magazine Rack made of superior quality chemical pressure treated edge-glued finger jointed ISO specification rubberwood or equivalent panels including melamine polishing. Size: Length – 750 mm, Width – 300 mm, Height – 1050 mm.Magazine Rack made of superior quality chemical pressure treated edge-glued finger jointed ISO specification rubberwood or equivalent panels including melamine polishing. Size: Length – 750 mm, Width – 300 mm, Height – 1050 mm.
8Pantry setup with granite top table including stainless steel sink, pantry accessories, storage rack and shutters. Size: Length – 4800 mm, Width – 600 mm, Height – 750 mm.Pantry setup with granite top table including stainless steel sink, pantry accessories, storage rack and shutters. Size: Length – 4800 mm, Width – 600 mm, Height – 750 mm.
9LED square type light including laying of cable with casing and capping.LED square type light including laying of cable with casing and capping.
10Refabrication of 16-seater sofa including replacement of rexine and foam cushion.Refabrication of 16-seater sofa including replacement of rexine and foam cushion.
11Beautification of outside area including wooden boxes for natural plants and pebbles.Beautification of outside area including wooden boxes for natural plants and pebbles.

AI Tender Summary

OUR REF NO 57938954
AUTHORITY Government Departments
TENDER VALUE 16.77 Lakhs
LAST DATE 29-10-2026
Authority
Authority Name Indian Navy
Work Description Bids Are invited for Custom Bid For Services - Establishment Of Officers Tea Room And Pantry For Ftsu(Chn) In Afloat Support Complex(Asc) At Chpa - Setting Up Of, Erection And Alignment Of Ms Structure Of Size 10 M Length × 06 M Width × 03 M Height Including Provision Of Three Doors And One Partition By Using Zinc Coated Ms Hollow Section Of 80 Mm × 80 Mm For Primary Load Bearing Columns And Main Beams, While 40 Mm × 40 Mm Sections Shall Be Used For Secondary Framing Members Such As Purlins, Bracing Or Internal Partitioning. Includes Planning, Material Preparation, Joining, Assembly And Alignment To Ensure Structural Strength. Design Shall Account For Self-Weight, Gypsum/Pvc Ceiling And Wall Cladding, Structural Loads And Potential Seismic Forces. , Providing And Placement Of 12 Mm Thick Superior Quality Chemical Pressure Treated Edge-Glued Finger Jointed Iso Specification Rubberwood (Or Equivalent) Vertical Panelling Of 300 Mm With 10 Mm Tongue And Groove. Timber Framework On Ms Square Pipes Fixed With Screws/Adhesive Using Hdhmr Board/Runners Of Size 50 Mm (±5 Mm) × 18 Mm (±2 Mm). Horizontal Frame Spacing: 150 Mm – 600 Mm – 600 Mm. Vertical Frame From Bottom: 375 Mm Height And 600 Mm Span. Rubberwood Skirting On Top Panel. Entire Surface To Be Sanded (60 & 80 Grit), Shellac/Berger Filler Applied With Ncd Thinner, Chalk Putty Applied On Nailing Areas, Sanded With 120 Grit, Wood Sealer Applied And Rubbed With 320 Grit, Followed By Melamine Spray Polish For Shine, Finish And Durability. , Providing And Fixing False Ceiling At All Heights Including Framework Of Galvanized Ms Special Sections (Zinc Coating 120 G/Sqm, Conforming To Is:277) Consisting Of Angle Cleats And Ceiling Boards (590 Mm × 580 Mm) Which Shall Be Asbestos-Free, Non-Cementitious Lightweight Calcium Silicate Reinforced With Natural Fibres, Free From Harmful Or Toxic Ingredients. , Providing And Placement Of Polyvinyl Chloride (Pvc) Louvers. Louvers Shall Be Waterproof And Moisture Resistant. , Central Table Made Of Superior Quality Chemical Pressure Treated Edge-Glued Finger Jointed Iso Specification Rubberwood Or Equivalent Panels Including Melamine Polishing. Size: Length – 900 Mm, Width – 600 Mm, Height – 450 Mm. , 06-Seater Dining Table With Cushion Chair Made Of Superior Quality Chemical Pressure Treated Edge-Glued Finger Jointed Iso Specification Rubberwood Or Equivalent Panels Including Melamine Polishing. Size: Length – 1500 Mm, Width – 900 Mm, Height – 750 Mm. , Magazine Rack Made Of Superior Quality Chemical Pressure Treated Edge-Glued Finger Jointed Iso Specification Rubberwood Or Equivalent Panels Including Melamine Polishing. Size: Length – 750 Mm, Width – 300 Mm, Height – 1050 Mm. , Pantry Setup With Granite Top Table Including Stainless Steel Sink, Pantry Accessories, Storage Rack And Shutters. Size: Length – 4800 Mm, Width – 600 Mm, Height – 750 Mm. , Led Square Type Light Including Laying Of Cable With Casing And Capping. , Refabrication Of 16-Seater Sofa Including Replacement Of Rexine And Foam Cushion. , Beautification Of Outside Area Including Wooden Boxes For Natural Plants And Pebbles.
Basic Detail
Tender No GEM/2026/B/8051896
Bidding Type Tender
Location
City Chennai
State Tamil Nadu
Key Dates
Publish Date 08 Oct 2026
Submission Date 29 Oct 2026
Open Date 30 Oct 2026
Finance
Tender Value 16.77 Lakhs
Tender Fee Ref. Documents
EMD 50315
Exemption Available
Document List
b156bc7b-e72e-4d5c-8d99-a3d33a3f2ff3.pdf
1791457630.xlsx
1791455315.pdf
1789708215.pdf
1791456151.pdf
1789708235.pdf
1791455332.pdf
1789708248.pdf
SOW_18c1a3d0-8a5f-41a5-8f951789708487566_FTSU-TNP.pdf
ATC_af9d21c3-0b15-4c68-94c91791455454064_FTSU-TNP.pdf
NEWSLA_62889247-91d8-40fb-bbc21791456192610_FTSU-TNP.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 29, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 11 days
Oct 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
pdf

b156bc7b-e72e-4d5c-8d99-a3d33a3f2ff3.pdf

xlsx

1791457630.xlsx

pdf

1791455315.pdf

pdf

1789708215.pdf

pdf

1791456151.pdf

pdf

1789708235.pdf

pdf

1791455332.pdf

pdf

1789708248.pdf

pdf

SOW_18c1a3d0-8a5f-41a5-8f951789708487566_FTSU-TNP.pdf

pdf

ATC_af9d21c3-0b15-4c68-94c91791455454064_FTSU-TNP.pdf

pdf

NEWSLA_62889247-91d8-40fb-bbc21791456192610_FTSU-TNP.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender