Tender For Upgradation Of Multiplay Courtyard Inside Community Centre, Sector 15, Chandigarh.
Tender Value
11.55 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
6 days left
EMD
23115
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Multiplay Courtyard Inside Community Centre, Sector 15, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by Mechanical means ( Hydraulic excavator) manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, and excluding of disposed earth to be leveled and neatly dresses. DSR 2.6.1-2.36 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:5:10 (1 cement : 5 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 10 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA) (DSR 4.1.10 A) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level :1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). (DSR 4.1.2) |
| 4 | Providing and fixing artificial turf mat of reputed make having minimum 40–50 mm pile height, UV-stabilized polyethylene monofilament grass, tufted on polypropylene backing with latex coating, including jointing with adhesive tape, silica sand and rubber granule infill, cleaning durface, cutting, fitting, finishing and all incidental works complete as per manufacturer's specifications and directions of Engineer-in-Charge. |
| 5 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over 20mm thick cement sand mortar 1:4 including grouting the joints with cement mortar etc. all complete as per the direction of Engineer-in-charge. ( without colour pigment) |
| 6 | Providing and Laying of kerb of size 2’-0” x 9” having 4” thickness at bottom and 3” thickness at top and made of plain cement concrete 1:2:4 duly vibrated and compacted. The rates also includes fixing in position at or near ground level in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per direction of Engineer-in-charge. direction of Engineer-in-charge. |
| 7 | Steel work in built up section/ framed work including cutting, hoisting, fixing in postion and applying a priming coat of approved steel primer using structural steel etc. as requried.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR 10.25.2 |
| 8 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. (DSR 16.70.2) |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work. (DSR 13.99.1) |
| 10 | Providing and fixing UV-stabilized HDPE knotless ball-stop net of 2.5–3.0 mm thickness with 40–50 mm mesh size over existing support framework, including GI wire ropes, clamps, turnbuckles, hooks, edge binding, stitching, tensioning, fixing and all accessories complete in all respects as directed by the Engineer-in-Charge. |
| 11 | Providing and fixing 19mm + 1mm thick commercial board cupboard shutters of 3'-0\\" long & 6'-3\\" high provided with teak veneer on all outer side and fixed in cupboard with two/three tier sliding and locking arrangement. The rate also includes the cost of handles, rollers, locking and other necessary arrangement etc. including the cost of filler and two or more coats of polish on outerside and innerside two or more coats of paint over one coat of wood primer and filler to provide smooth finish complete in all respect the entire satisfaction of Engineer-in-Charge. (Elevational area to be measured for payment) |
| 12 | Providing and fixing 19mm + 1mm thick marine grade A ply for cupboard havng box of 6'-0\\" long, 2'-0\\" deep and 11'-0\\" high provided with one side decoratiove mica (laminated sheet) and other side balancing lamination covered with edges to be sealed with PVC edge bending 2.00 mm thick 19mm wide tape with hot glue by edge bending machine of approved brand including and back shall be covered with 6mm thick marine grade A ply including 4nos shelves of size 6'-0\\"x2'-0\\" and 2no's drawers of size 3'-0\\" x 1'-9\\" x 0'-9\\" with sliding arrangements, G profile handle in drawer & bottom with 6mm ply and to be fixed on wall with screws and gutties complete in all respect the entire satisfaction of Engineer-in-Charge. (Elevational area to be measured for payment) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender