Tender For Repair And Maintenance Of Anganvadi At Chokkarayan Kadu Ward-1 In Bhavani Municipality
Tender Value
3.60 Lakhs
Estimated cost
Bid Submission
23 Oct 2026
4 days left
EMD
3600
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Anganvadi At Chokkarayan Kadu Ward-1 In Bhavani Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain cement concrete and clearing away from site including all charges as per directed by departmental officer. |
| 2 | Earth work excavation for foundation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc.,as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10 with standard specifications. |
| 3 | Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. |
| 4 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 5 | for footing and garde beam |
| 6 | for column |
| 7 | for slab |
| 8 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half M.sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 9 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 10 | Brick work in cement mortar 1:5 mix (one cement and five sand) using second class ground bricks of size 23cm x 11cm x 7cm including cost, conveyance of all materials at site and all labour charges and incidental charges etc., complete as per standard specification |
| 11 | Brick Partition Walls using II class ground moulded chamber bricks of size 9\\"X43/8\\"X 23/4\\" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specification - 10 sqm |
| 12 | Supply and fixing of cuddapah slab of required size and thickness of 20/30 mm thick including cost of materials and labour charge. complete as per standard specification |
| 13 | Supply and fixing of M.S. iron grill gate of required size and design approved by the departmental officers including cost of materials and labour charges including one coat of primer of red oxide etc., complete as per standard specification |
| 14 | Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulatedpanels with external 0.50mm total coated thicknesspre painted Galvalume sheet with trapezoidal roofingprofile having crest height of 38mm at every 333mm span, whereas internal 0.50mm total coated thicknesspre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluorocarbon and hydro chlorofluoro carbon free, highperformance rigid polyurethane foam (PUF) conformingto IS 12436 having density not less than 40±2Kg/M3,Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessoriessuch as screws ,fastners ,sealants etc for fixing the paneletc., complete complying with standard specification.50mm (+38mm) thick PUF roof panel |
| 15 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 16 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 17 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 18 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 19 | Painting two coats with best quality synthetic enamel paint of approved quality and colour over old iron works including cost, conveyance of all to site and labour charges etc., complete complying with standard specification. |
| 20 | Painting two coats with ready mixed plastic emulsion paint of First class quality of approved colour etc., over plastered surface including priming coat and cost and conveyence of all meterials etc., complete as per standard specification. |
| 21 | Wiring with 2x1.5 Sq.mm [22/0.3] PVC insulated SC unsheathed Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T.switch with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light & Fan point as per standard specification,. SD22. |
| 22 | Wiring with 2x4sqmm (56/0.3mm) PVC insulated SC unsheathed Cu. Cable conductor cable of 1100V grade in suitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mm x 100mm x 75mm MS switch box for 15A 3 pin non interlocking CS plug with painting of suitable colour,with continuous earthwire connection by 14 SWG TC wire for open power plug point. SD 13 |
| 23 | Supplying and fixing of 18w LED Tub light fitting approved qulity including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 24 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") (SD106) |
| 25 | Providing and fixing PVC rain water downfall pipe with necessary T.W.Clamps plugs, shoes, bends,other clamps, screws nails etc., complete complying with standard specification.The rate is inclusive of cost of removable iron gratings of appropriate size.The size of Teak wood plugs used is 150x25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \\"U\\" clamps at the centre of pipes to be fixed etc., complete. |
| 26 | 110mm dia Pipe Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender