Tender For Various Construction Of 1 No. 220 Kv & 1 No. 132 Kv Feeder Bay Alongwith Transformer Foundation For Addl. 200 Mva 220/132 Kv Transformer At 220 Kv S/S Birsinghpur.
Tender Value
83.64 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
5 days left
EMD
1.67 Lakhs
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Satna → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Various Construction Of 1 No. 220 Kv & 1 No. 132 Kv Feeder Bay Alongwith Transformer Foundation For Addl. 200 Mva 220/132 Kv Transformer At 220 Kv S/S Birsinghpur.
BOQ
| Sl. No. | Item Description |
| 1 | Various Construction of 1 no. 220 kV & 1 no. 132 KV feeder bay alongwith transformer foundation for Addl. 200 MVA 220/132 kV Transformer at 220 kV S/s Birsinghpur. |
| 2 | 2.6, FOUNDATATION 220KV FEEDER BAY AND ADDL 200MVA TRANSFORMER Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) ... up to 1.5m, ... earth to be leveled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 3 | 4.1.2.3,Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate (MM-7.5) |
| 4 | 5.16.1,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete. |
| 5 | 5.16.6,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete. TMT Bar |
| 6 | 5.1.1,Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth leave : M 20 - Grade cpmcrete |
| 7 | 5.9.1,Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 8 | 16 NSOR,Labour only for fixing bolts of any length i/c weight of nuts & washers, etc. complete as per direction of Engineer in charge. |
| 9 | 2.24,Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 10 | 4.1.1.3,Providing and laying in position cement concrete …. with M-15 – Grade concrete |
| 11 | 4.3.1,Centering and shuttering including strutting, propping etc. and removal of form work for :..Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth.\\" |
| 12 | 5.9.2.1 ,Centering and shuttering in cluding strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. |
| 13 | 13.8,6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) |
| 14 | 1.1.2.1,Transportation By Mechanical Transport including loading, unloading and stacking. Earth 1 km |
| 15 | 10.2,Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 16 | 13.64,Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. |
| 17 | 2.6, FOUNDATATION 132KV FEEDER BAY Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) ... up to 1.5m, ... earth to be leveled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 18 | 4.1.2.3,Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate (MM-7.5) |
| 19 | 5.16.1,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete. |
| 20 | 5.16.6,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire up to floor two level including all wastage etc. complete. TMT Bar |
| 21 | 5.1.1,Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth leave : M 20 - Grade cpmcrete |
| 22 | 5.9.1,Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 23 | 16 NSOR,Labour only for fixing bolts of any length i/c weight of nuts & washers, etc. complete as per direction of Engineer in charge. |
| 24 | 2.6, CABLE TRENCH D-type 80m, E-TYPE 40M, F-TYPE 60M Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) ... up to 1.5m, ... earth to be leveled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 25 | 4.1.2.3,Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level: With 40 mm nominal size graded stone aggregate – M-7.5 Nominal Mix (1 Cement : 4 Sand : 8 Graded Stone Aggregate) |
| 26 | 5.16.6,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding, including cost of binding wire, all wastages and overlaps, couplers, etc., complete – Thermo-Mechanically Treated Bars FE 500 D or more conforming to IS 1786 – AT1 + AT2 & Cover |
| 27 | 5.1.1,Providing and laying in position specified grade of reinforced cement concrete (nominal / design mix with 20 mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement – all work up to plinth level – M-20 Grade Concrete – Raft + Wall |
| 28 | 5.9.2.1,Centering and shuttering including strutting, propping etc. and removal of form work for walls (any thickness), including attached pilasters, buttresses, plinth beams and string courses etc., up to plinth level |
| 29 | 10.1,Structural steel work in single section fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, all complete – Angle 50×50×5 |
| 30 | 13.64,Painting with synthetic enamel paint of approved brand and manufacture to give an even shade – two or more coats on new work – Angle 50×50×5 |
| 31 | 41 NSOR,Providing & fixing 100 mm dia AC pipe with grating for weep holes, abutments, wing walls, retaining walls etc., including cost of all material, labour, taxes, T&P etc., complete as directed by Engineer-in-Charge |
| 32 | 10.22.1,In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. |
| 33 | 10.22.2,Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 34 | 2.6, EARTH PIT Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) ... up to 1.5m, ... earth to be leveled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 35 | 4.1.2.3,Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – all work up to plinth level: With 40 mm nominal size graded stone aggregate – M-7.5 Nominal Mix (1 Cement : 4 Sand : 8 Graded Stone Aggregate) |
| 36 | 5.16.6,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding, including cost of binding wire, all wastages and overlaps, couplers, etc., complete – Thermo-Mechanically Treated Bars FE 500 D or more conforming to IS 1786 |
| 37 | 5.16.1,Mild steel and medium tensile steel bar |
| 38 | 5.1.1,Providing and laying in position specified grade of reinforced cement concrete (nominal / design mix with 20 mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement – all work up to plinth level – M-20 Grade Concrete – Raft + Wall |
| 39 | 5.9.1,Centering and shuttering including strutting, propping etc. and removal of form work for walls (any thickness), including attached pilasters, buttresses, plinth beams and string courses etc., up to plinth level |
| 40 | 18.7.1,15mm cpvc threded fittings this include joints. |
| 41 | 18.7.3,25mm cpvc threded fittings this include joints. |
| 42 | 18.7.5,40mm cpvc threded fittings this include joints. |
| 43 | 18.13.3,40MM CPVC gate valve |
| 44 | 18.13.1,25MM CPVC gate valve |
| 45 | 18.29.1,Brass bib cock 15 mm dia |
| 46 | 2.6, PCC ROAD 100M Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 47 | 34 NSOR,Supply, stacking, spreading and hand packing for road works, 80mm over size metal black trap, basalt or granite free from dust & foreign materials including all lead and lift, stacking, boxing, labour charges, T&P, trans-portation from approved quarry or crusher to site, royalty charges etc. complete as per direction of Engineer-in-charge. |
| 48 | 35 NSOR,Supply and stacking at site 40mm metal (for Road works) including transportation, lead & lift, royalty, taxes etc. complete as directed by Engineer-in-charge. |
| 49 | 36 NSOR,80 mm thick WBM coat in wet season by SRR / DRR including spreading of Metal & Moorum, watering, Korebandi (40 mm metal), including hire & running expenses of roller complete. |
| 50 | 2 NSOR,Supplying and spreading in EHV Substation yard or road works with hard moorum/ hard copra having maximum dry desnsity not less than 2 MT per cum with stacking, boxing , including cost of material, T&P, Royalty, all lead & lift etc. complete in layers not exceeding 200 mm , as per specifications and direction of Engineer-in-Charge. but excluding compaction Quantity of moorum for over size metal one third of Qty of NSOR item at S.No. 01` |
| 51 | 10NSOR,Compaction of moorum /earth by using SRR/DRR including hire & running expenses of roller, cost of water, T&P, labour, transportation, taxes etc. complete as directed by Engineer in charge. |
| 52 | 11NSOR,Consolidation of oversize metal by SRR / DRR with spreading of Moorum including hire & running expenses of roller with cost of water, T&P, Labour, transportation, taxes etc. complete, |
| 53 | 37NSOR,Providing & Fixing in position LDPE Film of 150 micron (0.15 mm ) , ISI mark- 2508 (Grade 231) , including heat sealed joints at ends as per IS 9698 inclu-ding cost of all material, labour, T&P, taxes, transportation etc. complete as directed by Engineer in charge |
| 54 | 4.3.1,Centering and shuttering including strutting,propping etc. and removal of form work for Upto plinth: Foundations, footings, bases forcolumns, plinth beams, curtain walls, columns below plinth. |
| 55 | 4.1.1.3,Providing and laying in position cement concreteof specified grade excluding the cost of centeringand shuttering - All work upto plinth level With 20mm nominal size graded stone aggregate.M-15 – Grade concrete |
| 56 | 2.1,YARD LEVELLING AND METLING Surface drsssing of the ground including removing vegetable dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and liftup to 1.5 m |
| 57 | 4.1.1.3,Providing and laying in position cement concreteof specified grade excluding the cost of centeringand shuttering - All work upto plinth level With 20mm nominal size graded stone aggregate. M-15 – Grade concrete |
| 58 | 5.9.2.1,Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. |
| 59 | NSOR 285,Providing Layer .. Below for BC soil strat base rate@ 146 a. First layer provinding and stone crusher Directed by Engineer in charge b. Second Layer Providing and laying mixture Directed by Engineer in charge |
| 60 | 8 NSOR,Supply stacking and spreading of 40 mmm crusher and taxes etc. complete as directed by Engineer in charge. |
| 61 | 11.66,Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. |
| 62 | 13.53,Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) |
| 63 | 1.2.2,Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Earth |
| 64 | 2.6,MAIN OIL TANIK Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil |
| 65 | 4.1.2.3,Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 40mm nominal size graded stone aggregate. M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate |
| 66 | 5.16.6 ,Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786(Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge.2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”)Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 or more conforming to IS 1786 |
| 67 | 5.1.1 ,Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate) excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : M-20 Grade Concrete |
| 68 | 5.9.1 ,Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for concrete upto plinth level |
| 69 | 5.9.2.1 ,Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc. Uptoplinthlevel. |
| 70 | 5.9.3 ,Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. |
| 71 | 4.1.1.3 ,Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level : With 20mm nominal size graded stone aggregate. M-15 – Grade concrete |
| 72 | 2.9.2 ,Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. |
| 73 | 2.1,Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). |
| 74 | 10.22.1 ,Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 75 | 2.24,Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 76 | 1.2.2 ,Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre. Earth |
| 77 | 5.9.5 ,Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, girders, bressumers and cantilevers |
| 78 | 10.1,Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 79 | 13.66.2 ,Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. |
| 80 | 13.59.3 ,Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work : 150 mm diameter pipes |
| 81 | 13.5,Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). |
| 82 | 13.4.1 ,12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement : 3 sand) |
| 83 | 39.1.2 SOR wef 01.12.2020 Electric,Supplying & installation of required capacity of single phase, 50 Hz, 220V, deep well submersible pump stainless steel body, as per IS of approved make, suitable for 4\\"/6 \\" tube well with control panel starter suitable for submersible pump with dry run protection, connections, including clamp, bore cap etc. as required as per specifications but excluding pipe, SS/Nylon wire rope and connection cable. 1 HP with 7-8 stages, head metre 61-18, discharge LPM 25-90 |
| 84 | 6.1.1.1SOR PWD wef 01.01.24 Electric,Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid steel conduit ISI marked of suitable size including painting etc. with 20/16 Amp. F.T. switch &socket/S.S. combined 20/16/6 amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints as per specification for :- On separate board Short point. ( Using flush type normal accessories) |
| 85 | 6.1.1.2 (SOR w.e.f. 01.01.2024) Elect,\\"Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid steel conduit ISI marked of suitable size including painting etc. with 20/16 Amp. F.T. switch &socket/S.S. combined 20/16/6 amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints as per specification for :-..On separate board.Medium point.Using flushtype normalaccessories.\\" |
| 86 | 6.1.1.3 (SOR w.e.f. 01.01.2024) Elect,\\"Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid steel conduit ISI marked of suitable size including painting etc. with 20/16 Amp. F.T. switch &socket/S.S. combined 20/16/6 amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints as per specification for :-..On separate board.Long point.Using flushtype normalaccessories.\\" |
| 87 | 6.1.1.4 (SOR w.e.f. 01.01.2024) Elect,\\"Point wiring (excluding metallic switch box & sheet) for 3 Pin 16 Amp. socket outlet point with 4sq. mm. PVC insulated cable FRLS with copper multi strand conductor ISI marked in surface rigid steel conduit ISI marked of suitable size including painting etc. with 20/16 Amp. F.T. switch &socket/S.S. combined 20/16/6 amp. of ISI marked and 4sq. mm. PVC insulated FRLS copper earth continuity conductor of green colour inside conduit, screwless connector for joints as per specification for :-..On separate board.Extra long -I.Using flushtype normalaccessories.\\" |
| 88 | 27.8.1.2 SOR PWD wef 01.01.24 Electric,Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but without enclosures :- Single pole MCB SP 6Amp to 32Amp 10kA rating |
| 89 | 15.13,Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 90 | 116 NSOR,\\"Supply and fixing in position best India make brass plated 150 mm dia. gate valve with Iron Wheel heads etc. complete in all respects including cost of all material, labour, transportation upto site, T&P etc., all complete, as per direction of Engineer-in-charge (Base rate Rs 10650/- each)\\" |
| 91 | 114 NSOR,\\"Providing and fixing in position 150 mm diameter GI pipe (Medium Grade) conforming to IS 1239 Part I (latest revision) having thickness 4.8 mm, including all fitting such as sockets, bends, elbows, tees, union etc., as per site requirements, including transportation upto site, cost of all labour, material, tools & plants, all incidentals etc., required to complete the job, as per direction of Engineer-in-Charge etc.(Excavation & back-filling of the trenches shall be paid seperately. (Base rate Rs 1350/- per Rmt.)\\" Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender