Tender For Addn/ Altn To Security Fencing At K Top And Beside Of Noc Bldg And Provn Of Plain Cement Concrete Path With Concertina Coil At Af Stn Kanheri Hills Under Ge Af Thane
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
3 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn/ Altn To Security Fencing At K Top And Beside Of Noc Bldg And Provn Of Plain Cement Concrete Path With Concertina Coil At Af Stn Kanheri Hills Under Ge Af Thane
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 15-Oct-2026 | REVISED BOQ | BOQ | 27-Oct-2026 |
| 2 | 27-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Brickwork or stone/boulder masonry, built inCement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles (For erection of Angle Iron) complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for cement concrete Type B-2 (1:2:4) 40 mm Graded Stone Aggregate in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) all as specified and directed by Engr-in-Charge. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for MS Iron of old Y Angle completed all as specified and directed by Engr-in-Charge. |
| 4 | S&F in Repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc complete all as specified and directed by Engr-in-Charge. |
| 6 | S&F in repair Concertina coil fencing with punched tape concertina coil 1050 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre complete all as specified and directed by Engr-in-Charge. |
| 7 | S&F Concertina coil fencing with punched tape concertina coil 1050 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre complete all as specified and directed by Engr-in-Charge. |
| 8 | S&F Concertina coil fencing with punched tape concertina coil 300 mm dia 6-7 metre openable length, having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre complete all as specified and directed by Engr-in-Charge. |
| 9 | S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge. |
| 11 | Surface dressing n exc 15 cm deep in hard & dence Soil complete all as specified and directed by Engr-in-Charge. |
| 12 | Excavation in trenches in hard/dence soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep and getting out complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling as mass concrete or in sub base of floors complete all as specified and directed by Engr-in-Charge. |
| 14 | M&L 100 mm thick Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in floors complete all as specified and directed by Engr-in-Charge. |
| 15 | Removal of surplus soil to a distance not exc 50 metre and depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified and directed by Engr-in-Charge. |
| 16 | M&L for Pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6, (using 20mm graded stone aggregate) exc 10 cm width and set in CM (1:4) as required completed all as specified and directed by Engr-in-Charge. |
| 17 | M&L rendering/plastering, 15mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement as required complete all as specified and directed by Engr-in-Charge. |
| 18 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-In-Charge. |
| 19 | S&F 110mm internal dia PVC (SWR) pipes single sockets as in weep holes any length with rubber ring joints laid in tranches or in floor complete all as specified and directed by Engr-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 03, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender