Tender For Repair To Area Drain, Cover Slab At Drde Gwalior & Repair To Certain Road And Road Furniture At Drde Gwalior Under Ge (I) R&D Delhi.
Tender Value
45.68 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
91360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gwalior → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Area Drain, Cover Slab At Drde Gwalior & Repair To Certain Road And Road Furniture At Drde Gwalior Under Ge (I) R&D Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of unreinforced cement concrete of any description and in position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer-in-Charge. |
| 3 | Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 4 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc built in cement mortar complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Cleaning of open drains by removing soil/sand accumulated in the drains and removal/disposal of the same to a distance not exceeding 250m and not exceeding 500 away and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for PCC (1:2:4) type B1 (Using 20mm graded granite stone aggregate) in benching/coping, lintels upto 1.5m clear span, sills, steps, seismic and other similar bands, plinth courses, string courses, parapets and railings up to 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for precast RCC (1:2:4) type B1 (1:2:4) (Using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 8 | M&L for brickwork with fly ash bricks, straight or curved on plan not exceeding 6m mean radius, built in CM (1:4) complete all as specified and directed by the Engineer-in-Charge. |
| 9 | S&F reinforcement TMT steel bars of 10mm diameter and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm diameter. or securing with clips or welded complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished fair and even complete all as specified and directed by the Engineer-in-Charge. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for checquered designer cement concrete tiles 20cmx20cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with white or grey cement and pigments over 20mm thick screed bed in CM (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 13 | M&L for spreading neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified and directed by Engineer-in-Charge. |
| 14 | Dismantling interlocking paver blocks of any description, laid dry and pointed. |
| 15 | M & L for 50mm thick Sand filling under floors or in foundations including watering and consolidation |
| 16 | M&L for rubber moulded precast conctete interlocking paver block any shape and size confirming to IS 15658-2006, 60mm thick, with grey cement and no pigment, M-35 Grade, complete all as specified and directed by Engineer-in-Charge. |
| 17 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed. |
| 18 | Applying evenly a priming/tack coat with paving bitumen VG-30 at 5kg per 10Sqm complete all as specified and directed. |
| 19 | M&L for 30mm thick (compacted thickness) bituminious semi dense asphaltic concrete using 5.5% binder content by weight of total mix, (VG-30 grade paving bitumen) using mechanical pavers and vibratory rollers of appropriate specifications spread rolled and compacted, consoliated to required gradient and camber. |
| 20 | Painting lines, dashes, letters, arrows etc. on road pavement, by mechanical application of 1.5mm thick hot thermoplastic road marking (reflective) strips of shade/colour as directed using automatic application mechine including preperation and cleaning of surfaces. |
| 21 | S&F polycarbonate convex road safety mirror 800mm dia. as per IRC including necessary fixing arrangements complete all as per the manufacturer's instructions and as directed by the gineer-in-Charge.Make: Protek/Swerflex/Tata BP Solar/3M |
| 22 | S&F dual directional reflective cat eye (Road Glow Stud) of impact resistant ABS plastic 100x90x16mm, of ultra violet resistant yellow colour, having micro prismatic/cube corner reflectors suitable for fixing with epoxy/bitumen adhesive as per manufacturer's specification/instructions complete all as specified and as directed by the Engineer-in-Charge. Note: Appropriate epoxy adhesive on the road surface shall be provided as per manufactures specifications/ instructions before fixing the cat eye and the same is deemed to be included in the unit rate quoted. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender