Tender For Provn Of Overhead Shed For Existing Swimming Poll, Arc, Happy Valley And Provn Of Water Supply At No.2 Gate Of Field Craft Training Area At Mawsbuit Hills Of annual rate contract Under Ge Shillong
Tender Value
49.75 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
99500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Overhead Shed For Existing Swimming Poll, Arc, Happy Valley And Provn Of Water Supply At No.2 Gate Of Field Craft Training Area At Mawsbuit Hills Of annual rate contract Under Ge Shillong
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches in soft / loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed. |
| 2 | Removing excavated material (soil) to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 3 | Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm complete all as specified and directed. |
| 4 | M&L for cement concrete 1:4:8Mix, type D-2, using 40 mm graded crushed stone aggregate, as in Sub base for floor complete all as specified and directed. |
| 5 | M & L for Reinforced cement concrete, M-25 (design mix) (using 20mm graded crushed stone aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 6 | M & L for Reinforced cement concrete, M-25 (design mix) (using 20mm graded crushed stone aggregates) as in Columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 7 | M & L for Reinforced cement concrete, M-25 (design mix) (using 20mm graded crushed stone aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 8 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including bending, and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 9 | All as per item No 8 here in before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 10 | M&L for Formwork to sides of concrete of rough finished on flat surfaces in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 11 | M&L for Form work in rough finished surfaces of of rectangular, square or polygonal sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 12 | M&L for formwork to sides and soffits in rough finished flat surfaces of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc specified and directed. |
| 13 | M&L for rendering 10 mm thick on concrete surface in cement mortar (1:6) as backing coat and 5 mm th in CM 1:4 finishing the surface even and smooth without using extra cement, mix with water proofing compound as per manufacturer's instructions complete all as specified and directed.Note:- WPC shall be measured & Paid separately under respective item of BOQ. |
| 14 | Supply only for water proofing compound complete all as specified and directed. |
| 15 | M&L for preparation of new plastered surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 16 | M&L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed. |
| 17 | S&F base and gusset Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed. |
| 18 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm n exc 10cm long complete all as specified and directed |
| 19 | S&F 25 mm dia Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long complete all as specified and directed |
| 20 | M&L for preparation of new surfaces of steel exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 21 | S & F Pre-painted galvatume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 22 | M&L for 1 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 Gm complete all as specified and directed |
| 23 | M&L for Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface using broken stone or Boulders complete all as specified and directed. |
| 24 | S&F PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed. |
| 25 | S&F PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and directed. |
| 26 | M&L for cutting of existing road / hard standing / footpath surfaces for laying of GI water tubing complete all as specified and directed. |
| 27 | Supply and laying Galvanised pipe medium grade size 40 mm (1.5”) dia, including all fittings such as tee, bend, nipple, socket, reducer, flange, union etc. complete all as specified and directed. |
| 28 | Supply and laying Galvanised pipe medium grade size 25 mm (1.0”) dia, including fittings such as tee, bend, nipple, socket, reducer, flange, union etc. complete all as specified and directed. |
| 29 | S&F Gun metal globe or Gate valves with iron wheel head, screwed both ends for iron pipe of size 40 mm bore complete all as specified and directed. |
| 30 | S&F Gun metal globe or Gate valves with iron wheel head, screwed both ends for iron pipe of size 25 mm bore complete all as specified and directed. |
| 31 | M&L for drilling and tapping GI water mains (in position ) for branch connetion from existing pipe line 40 mm dia complete all as specified and directed. |
| 32 | M & L for PCC 1:3:6 Mix, type C2 (using 40 mm graded crushed stone grade aggregate) for making good disturbed surface of channels/pavements/foot paths/roads/foundation etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender