Tender For Repair And Maintenance Of Security, Fencing, Boundary Wall, Gate, Drains, Culverts, Footpath, Hardstanding And Allied Works In Residential And Technical Complex At Adrde Agra Under Ge (I) R&D Delhi.
Tender Value
39.60 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
10 days left
EMD
79200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Security, Fencing, Boundary Wall, Gate, Drains, Culverts, Footpath, Hardstanding And Allied Works In Residential And Technical Complex At Adrde Agra Under Ge (I) R&D Delhi.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches,pillars etc complete all specified and directed. |
| 2 | M&L for brick work with fly ash bricks, old size, class designation 75(Kgf/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in CM (1:6) complete all as specified and directed. |
| 3 | All as per item No. 02 but except bricks (bricks used shall be retrieved from item No.01 i.e from demolition). |
| 4 | Taking down cement plaster of any thickness on walls including racking out joints hacking for key,scrubbing down with water etc complete all as specified and directed. |
| 5 | M&L for rendering 15mm thick in two layers of 10+5mm in CM (1:4) mixed with Pidi proof 101 LW(+) or Dr fixit or equivalent intergral water proofing admixture:- @ 200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7) (One part super latex, 4 part water and 7 parts of cement) @ 1.50 Kg of homogenious mixture/sqm in two coats and finish the surface even and smooth (without using extra cement) for external walls complete all as specified and directed.Note: Pidi proof 101 and super latex 302 to be measured and paid separately. |
| 6 | Supply only Pidi proof 101 LW (+) |
| 7 | Supply only Super latex 302 |
| 8 | M&L for rendering 15mm thick in CM (1:4) mixed with WPC on fair faces of brick work finished the surface even and smooth without using extra cement complete as specified and directed. |
| 9 | M&L for apply two coat of cement base paint on walls over one coat of alkali resistant primer including preparation of new plastered brick/concrete surfaces as specified and directed. |
| 10 | M&L for preparation of old decorated/plastered surfaces of wall (brick and concrete) and apply two coat of cement base paint as specified and directed. |
| 11 | M&L for providing and applying minimum 1mm thick wall care putty over prepared surface including sanding of the putty surface after drying to achieve even and smooth finish for painintg complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment on wall/roof projections including facia, cornices, etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 ltr/ 10 sqm on newly prepared surface of brick (plastered or un-plastered) or concrete surface complete all as specified and directed. Note: Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces with airless spray machine (Mechanical means) as approved by Engr-in-Charge . Apply 2nd coat after 1st coat is dry approximately 6-8 hrs between two coats. |
| 14 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on old prepared surfaces of brick (plastered or un-plastered) or concrete surface complete all as specified and directed. Note: Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces with airless spray machine (Mechanical means) as approved by Engr-in-Charge . Apply 2nd coat after 1st coat is dry approximately 6-8 hrs between two coats. |
| 15 | S&F of chain link fencing of size 50X50mm made of 3mm diameter GI wire including fixing to angle iron posts and including dismantling of old chain link fencing complete all as specified and directed. |
| 16 | Fixing only in repair G.I. chain link fencing including line wires,any mess size and type to any of standard rails, straining bolts, MS bars etc including provn of winding wire,welding of angle iron or MS flat piece into existing section as specified and directed. |
| 17 | Dismantling post or struts (wood, steel or RCC) any section, embedded in concrete, brick work,masonry, etc, including taking out embedded portion and making good natural ground to disturbed ground |
| 18 | S&F angle iron posts and rails,drilled and strut in fencing including cutting tops to shape as directed, drilling holes,notching for wire,etc,flat iron fillets(for securing wire mesh etc) including necessary drilling,bolting and riveting, etc and similar work conforming to Fe-290 grade E-165 as specified and directed by Engineer-in-Charge. |
| 19 | Supply only mild steel screw bolts (machine made) with (16mm to 20mm diameter of neck) hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long as specified and directed. |
| 20 | Supply only mild steel flat, round or square bar for weaving in chain link fencing, in available length Fe290 (Grade E-165) quality A complete all as specified and directed. |
| 21 | Dismantling structural steel work including doors, gates but excluding framed truss etc. all as specified and directed. |
| 22 | S&F framed work as in door or gates of angle or other section with gusset plates, rails braces, etc, complete, drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding and hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and holdfast complete all as pecified and directed. |
| 23 | Easing and adjusting of steel door/gate incl removing rusted and forging materials and replacing broken hinges/hold-fast including welding and all labour complete all as specified and directed. |
| 24 | M&L for welding in repairs exceeding 2.5cm but not exceeding 5cm in length exceeding 6mm but not exceeding 9mm thickness or metal to be welded and jointed (for fixing small articles like helical spring etc) complete all as specified and directed. |
| 25 | M&L for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate ) as in plinth protection and path finished even and smooth without using extra cement with forming construction joints filled with filler incl demolition complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L in repair precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate,40mm thick louvres and jallies including all moulding set in CM (1:4) complete all as specified and directed. |
| 27 | M&L for two coat of synthetic enamel paint to new or previously untreated steel surface of any description, over 10cm in width or girth, not otherwise described over one coat of red oxide primer including preparation of surfaces as specified and directed. |
| 28 | M&L for two coat of synthetic enamel paint to new or previously untreated steel surface of any description, not exceeding 10cm in width or girth, not otherwise described over one coat of red oxide zinc chrome primer including preparation of surfaces as specified and directed. |
| 29 | M&L for one coat of synthetic enamel paint including preparation of surfaces to old steel surface of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed. |
| 30 | M&L for 80mm thick machine pressed precast rubber moulded coloured cement concrete interlocking tiles/paver block of any shape and size with grey cement and pigment confirming to IS 15658-2006, M-35 grade including over 50mm thick sand cushion complete all as specified and directed. |
| 31 | All as per item No-30 but except tiles all as specified and directed by Engineer-in-Charge. |
| 32 | M&L for 75mm thick cement concrete, (1:4:8) type D2 40mm graded stone aggregate as subbase all as directed and specified by Engineer-in-Charge. |
| 33 | Disamantling of stone slabs and tiles of any description or thickness in floors,aprons etc. laid bedded and pointed in any mortar. |
| 34 | S&F Dholpur stone 16mm to18mm thick cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.50 sqm fixed with and including one number SS clamps (grade 202) of flat-30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing and including silicon treatment with 10mm thick CM (1:4) as specified and directed. |
| 35 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and including screed bed or bedding layer of mortar 10mm thick in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed. |
| 36 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with CM (1:3) (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and directed. |
| 37 | M&L for preparation of new concrete surface and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all as specified and directed by Engineer-in-charge. |
| 38 | M&L for removing old enamel paint and cleaning with scrapers, any number of coats any width or girth from concrete surface and applying two coats of synthetic enamel paint over a priming paint plaster coat complete all as specified and directed by Engineer-in-charge. |
| 39 | S&F in repair concertina coil 1050mm dia ( in stretched position) hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18SWG) fixed over razor wire at points whereever coil touches the bottom of razor wire with the help of hog rings (14 SWG) complete all as specified and directed. Note:Razor wire shall be measured and paid separately. |
| 40 | S&F in repair concertina coil 600mm dia ( in stretched position) hot dip galvanised steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18SWG) fixed over razor wire at points whereever coil touches the bottom of razor wire with the help of hog rings (14 SWG) complete all as specified and directed. Note:Razor wire shall be measured and paid separately. |
| 41 | S&F in repair new razor wire fencing with 2.6m diameter and 14mm width, 0.5mm thick razor strip fixed with clamps to angle iron or swan neck angle or to existing angle iron as directed by Engineer-in-Charge. |
| 42 | S&F in repair 2 strand, steel galvanised, barbed wire 2.24mm diameter barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails , straing bolds, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) as directed by Engineer-in-Charge. |
| 43 | S&F pre-painted galvanised aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with steel tapping sscrews as directed by Engineer-in-Charge. |
| 44 | S&F pre-painted galvanised aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with steel tapping sscrews as directed by Engineer-in-Charge. |
| 45 | M&L for non skid coloured ceramic tiles (out door) 7mm to 8mm thick [square/rectangular area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in neat coloured cement to match all as directed and specified by Engineer-in-Charge. |
| 46 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to edges of panels and finishing the groove complete as per specifications and direction of Engineer-in-Charge. |
| 47 | M&L for washed stone grit plaster on exterior walls in two layers,under layer 12mm cement platser (1:4) (1 cement : 4 coarse sand) furrowing the under layer with scratching tool,applying cement slurry on the under layer @3kg of cement per square meter, top layer 15mm cement plaster (1:1/2:2) (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chipping complete all as specified and directed.Note- payment for providing groove shall be made separately. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender