Tender For Periodical Services In Domestic Area Md And Otm Accn At Bhisiana Under Ge (Af) Bhisiana
Tender Value
25 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
4 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodical Services In Domestic Area Md And Otm Accn At Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles in any description and removing/disposal off from the site to outside MOD land complete all as specified and as directed. |
| 2 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 3 | Material and labour for 25mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers and jallies (measured solid) including all moulding frame (Pre cast frame) and set in cement mortar (1:6) including necessary form work complete all as specified and as directed. |
| 4 | Taking down cement plaster/rough cast plaster from brick walls/soffits of roof projections & chajjas /ceilings etc. including racking out joints, hacking for key & scrubbing down with water etc including disposal of rubbish material to any distance out side MOD land complete all as specified and as directed. |
| 5 | Material and labour for 15mm thick cement plastering/ rendering in cement mortar (1:4) on any face of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 6 | Material and labour for rendering/plastering 15 mm thick in CM (1:6) on any face of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 7 | Material and labour for rendering/plastering 5 mm thick in CM (1:3) on concrete surfaces of ceiling, finished fair and even complete all as specified and as directed. |
| 8 | Material and labour for rough cast plaster on exterior walls in two layers, under layer not less than 10mm cement plaster (1:3) (1 cement: 3 coarse sand ) furrowing the under layer with scratching tool, and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of (1: 1: 1) shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregates are thoroughly covered, complete in all respects and as specified and directed by the Engineer-in-Charge. |
| 9 | Material and labour for preparation of new plastered surfaces of ceiling by brooming down or by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash by using paint brush complete all as specified and as directed. |
| 10 | Material and labour for preparation of old plastered surfaces of walls/pillars /cornices by brooming down or by sand papering or by any other mean and after preparing the surfaces applying two coats of white wash by using paint brush complete all as specified and as directed. |
| 11 | Material and labour for preparation of old plastered surfaces of ceiling by brooming down or by sand papering or by any other mean and after preparing the surfaces applying two coats of white wash by using paint brush complete all as specified and as directed. |
| 12 | Material and labour for preparation of existing internal treated vertical surfaces by removing/scraping all loose paint, treatment, dust, dirt and other foreign matter using broom, paint brush, sand paper, wall sander or any other suitable means as required. The surfaces shall be thoroughly cleaned with a dry or slightly damp cloth. The item includes filling of nail holes, pin holes, minor undulations and hairline cracks with approved acrylic putty wherever required and prepared to obtain a smooth and even finish. Thereafter, applying one coat of Interior Acrylic Emulsion Paint of approved make, shade and tint (Company Depot Tinted) matching the existing colour, by using paint roller/brush. The rate shall also include application of additional coats, wherever necessary, to achieve uniform shade, proper coverage and smooth finish, complete in all respects as specified and directed by the Engineer-in-Charge.Brand and Make of interior acrylic emulsion paint: - Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian / Beaty Smooth of Nerolac / Promise Interior Emulsion of Dulux (AkzoNobel) |
| 13 | Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour as per existing with using paint brush complete all as specified and as directed. |
| 14 | Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete all as specified and as directed. |
| 15 | Material and labour for complete removal of existing treatment of any type/description (any layer) from external/internal wall/ceiling surfaces, soffits/chajja/roof projection surfaces etc., by scraping steel patti or Mechanical sander/grinder machine having suction vaccum Bag (Smart periodical methodology), complete all as specified and as directed. |
| 16 | Material and labour for preparation of exterior surfaces of walls/ceiling/soffits etc (new surface or old prepared surface after complete removal where directed through site order book), applying traditional cement-based putty (white-cement-based polymer-modified powder) (thickness from 1 to 1.5 mm as required for desired smoothness and levelling of surfaces in two layers), including gently sand the surface with fine emery paper after filling the putty in first coat/second coat to make surface smooth and ready for receiving further painting work complete all as specified and as directed. Notes : (i) The prepared surface after putty, the contractor will inform to the Engineer-in-Charge/GE for site inspection before applying further finishes. Further finishes work will start only after approval of the prepared surface from the Engineer-in-Charge through site order. |
| 17 | Material and labour for preparation of interior surfaces of walls/ceiling/soffits etc (over any type of surface new or old prepared after complete removal etc), applying acrylic putty is a water-based, Smooth, creamy paste (ready-to-use), white or off-white color (thickness from 1.0 to 1.5 mm as required for desired smoothness and levelling of surfaces in two layers), including sanding with wall sander after filling the putty in first coat/second coat to make surface smooth and ready for receiving further painting work complete all as specified and as directed. Notes : (i) The prepared surface after putty, the contractor will inform to the Engineer-in-Charge/GE for site inspection before applying further finishes. Further finishes work will start only after approval of the prepared surface from the Engineer-in-Charge through site order. |
| 18 | Material and labour for preparing the surface and applying 02 coats of interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 8 sq.m/litre/2 coats to wall surfaces (over any type of surface new or old prepared after complete removal, and applying putty etc) over and including a coat of interior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed. Brand and Make of interior acrylic emulsion paint: - Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian / Beaty Smooth of Nerolac / Promise Interior Emulsion of Dulux (AkzoNobel), Brand and Make of primer for internal : - Seal O Primer of Berger / Smart Care Primero of Asian / Premium Interior Wall Primer of Nerolac / Promise Interior Primer of Dulux |
| 19 | Material and labour for preparing the surface and applying 02 coats of exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 6 sq.m/litre/2 coats to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. (over any type of surface new or old prepared after complete removal, and applying putty etc) over and including a coat of exterior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed. Brand and Make of exterior acrylic emulsion paint: - Apex Ultima of Asian / Weather Coat antidust of Berger / Weather shield Protect of Dulux / Excel Mica Marble of Nerolac, Brand and Make of primer for external : - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac / Weather Shield Alkali Bloc of Dulux Please Enable Macros to View BoQ information |
| 20 | Material and labour for preparing the surface and applying 02 coats of exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 6 sq.m/litre/2 coats to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. (over any type of surface new or old prepared after complete removal, and applying putty etc) over and including a coat of exterior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed. Brand and Make of exterior acrylic emulsion paint: - Apex Ultima of Asian / Weather Coat antidust of Berger / Weather shield Protect of Dulux / Excel Mica Marble of Nerolac, Brand and Make of primer for external : - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac / Weather Shield Alkali Bloc of Dulux Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender