Tender For Repair And Maintenance Of Internal Water Supply, Sanitary Ware, Joinery, Plumbing Including Fitting And Fixture And Allied Work In Md Accn And Technical Complex At Adrde Agra & Welcome Maintenance And Smart Periodical Services Including Pe
Tender Value
40 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
7 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Agra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Maintenance Of Internal Water Supply, Sanitary Ware, Joinery, Plumbing Including Fitting And Fixture And Allied Work In Md Accn And Technical Complex At Adrde Agra & Welcome Maintenance And Smart Periodical Services Including Petty Repair In Residential And Technical Complex At Adrde Agra Under Ge (I) R&D Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Taking down of cement or cement lime plaster of any description on brick work or stone walls etc including racking out joints, hacking for key scrubbing down with water etc including removal of debris complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick in two layers of 10+5mm in CM (1:4) mixed with Pidi proof 101 LW(+) or Dr fixit or equivalent intergral water proofing admixture:- @ 200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7) (One part super latex, 4 part water and 7 parts of cement) @ 1.50 Kg of homogenious mixture/sqm in two coats and finish the surface even and smooth (without using extra cement) for external walls complete all as specified and directed.Note: Pidi proof 101 and super latex 302 to be measured and paid separately. |
| 3 | M&L for rendering 15mm thick in two layers of 10+5mm in CM (1:6) mixed with Pidi proof 101 LW(+) or Dr fixit or equivalent intergral water proofing admixture:- @ 200ml/bag over two coats of super latex 302 of Dr fixit or equivalent in the ratio (1:4:7) (One part super latex, 4 part water and 7 parts of cement) @ 1.50 Kg of homogenious mixture/sqm in two coats and finish the surface even and smooth (without using extra cement) for internal walls complete all as specified and directed.Note: Pidi proof 101 and super latex 302 to be measured and paid separately. |
| 4 | Supply only Pidi proof 101 LW (+) |
| 5 | Supply only Super latex 302 |
| 6 | M&L for rendering 15 mm thick in CM (1:4) mixed with WPC on fair faces of brick work finished the surface even and smooth without using extra cement complete as specified and directed.(Rate of WPC included in this item) |
| 7 | M&L for rendering 15mm thick in CM (1:6) on other than fair faces of brick wall or concrete surface including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for Dubbing out with CM (1:4) average 10mm thick on irregular face of walls/ceiling complete all as specified and directed. |
| 9 | M&L for rendering 5mm thick on fair faces of brick work or concrete surface of ceiling in CM (1:3) finished even and smooth (without using extra cement) complete all as specified and directed. |
| 10 | M&L for brick work with fly ash bricks, old size, class designation 75, straight or curved on plan exceeding 6m mean radius and built in CM (1:6) including demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment on wall/roof projections including facia, cornices, etc by scrapping with mechanical sander (having mechnical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed by Engineer-in-Charge. |
| 12 | M&L for providing and applying minimum 1mm thick wall care putty over prepared surface including sanding of the putty surface after drying to achieve even and smooth finish for painintg complete all as specified and directed. |
| 13 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on newly prepared surface of brick (plastered or un-plastered) or concrete surface complete all as specified and directed. Note: Exterior Primer and Acrylic emulsion paint to be applied on wall surfaces with airless spray machine (Mechanical means) as approved by Engr-in-Charge . Apply 2nd coat after 1st coat is dry approximately 6-8 hrs between two coats. |
| 14 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm on old prepared surfaces of brick (plastered or un-plastered) or concrete surface complete all as specified and directed. Note: Exterior Primer & Acrylic emulsion paint to be applied on wall surfaces with airless spray machine (Mechanical means) as approved by Engr-in-Charge . Apply 2nd coat after 1st coat is dry approximately 6-8 hrs between two coats. |
| 15 | M&L for preperation of old decorated plastered suface of walls and applying One coat of Cement Base paint complete all as specified and directed. |
| 16 | M&L for preperation of old decorated plastered suface of walls and applying Two coat of Cement Base paint after removal of existing treatment complete all as specified and directed. |
| 17 | M&L for preparation of newly plastered wall surfaces and applying Two coat of Cement Base paint including priming coat of primer on new surface complete all as specified and directed. |
| 18 | M&L for preperation of old decorated plastered surface of walls and applying Two coat of Oil Bound Distemper using roller after removal of existing treatment complete all as specified and directed. |
| 19 | M&L for preperation of old decorated plastered surface of walls and applying One coat of Oil Bound Distemper using roller after removal of existing treatment complete all as specified and directed. |
| 20 | M&L for Preparation of newly plastered wall surfaces and applying Two coat of Oil Bound Distemper over a coat of primer using roller complete all as specified and directed |
| 21 | M&L for Preparation of newly plastered ceiling surfaces and applying Two coat of Oil Bound Distemper over a coat of primer using roller complete all as specified and directed |
| 22 | M&L for Preparation of old decorated surfaces of ceiling and applying Two coats of White Wash complete all as specified and directed. |
| 23 | M&L for preparation of old treated wooden or wood based surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 24 | M&L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 25 | Demolition of PCC in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) (unreinforced) complete all as specified and directed. |
| 26 | M&L for 75mm thick cement concrete (1:3:6) type C2 (using 40mm stone graded crushed stone aggregate) as in plinth protection surface finished even and fair including forming construction (dummy) joints 6mm wide and 10mm deep and filled with filler at an interval not exceeding 3m and at change of direction complete all as specified and directed. |
| 27 | M&L for Writing letters or figures (Block, Roman,Italic or Indian) not exceeding 30cm high complete all as specified and directed. |
| 28 | Demolition and breaking up rain water pipe (PVC, AC, or re-inforced concrete) of size 100mm bore complete all as specified and directed. |
| 29 | S&F PVC SWR pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 30 | Fixing only PVC SWR pipes 100mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 31 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and directed. |
| 32 | S&F110mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 33 | S&F Stack clamps out of 50mm by 5mm flat iron and 16mm diameter round iron stays, including bolts and nuts and securing ends of stays to wall or roof suitable for 100mm bore pipe complete all as specified and directed. |
| 34 | Removal of plants/trees//Shrubs from roof tops/sides, external walls of bldg, chajjas, wall junctions of rains water/CI soil /waste pipe junctions including taking out the roots entered in wall/slab surfaces and making good the disturbed surface using (1:2:4) type B-0 or CM (1:2) including repairing the GI/CI/PVC pipe joints which were damged during cutting/taking out process to match with the existing and finishing the disturbed surface to match with existing including necessary scaffolding/staging upto a height of 15m from the ground level complete all as specified and directed. |
| 35 | M&L for preparation of old painted surfaces of steel/iron/CI pipes of any description exceeding 10cm width or girth and applying one coat of black bituminous paint complete all as specified and directed. |
| 36 | Taking down chowkhat with shutter (without taking off shutter from the frame) not exceeding 1.5 Sqm complete all as specified and directed. |
| 37 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in door opening as per specification and drawings (SSR or TD) complete all as specified and directed. |
| 38 | S&F factory made solid panel PVC door shutter 30mm thick (style ) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded colour plain PVC or channel having a PVC sheet strip of 20mm width stuch in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing complete (SSR or TD) all as specified and directed. |
| 39 | S&F Butt hinges 100mm size, medium weight, cold rolled stainless steel completed all as specified and directed. |
| 40 | S&F aluminum handle cast type anodized 150mm size complete all as specified and directed. |
| 41 | S&F aluminum anodized barrel tower bolt of extruded section size of bolt 150mm complete all as specified and directed. |
| 42 | Taking out old broken glass any thickness size,quality or description from wooden frame glazed with putty or fixed with beads complete all as specified and directed. |
| 43 | S&F for 3mm thick ordinary sheet glass of ordinary quality and glazing with aluminium rubber brush strip/filllet or beads, nut bolts or with rivets/pins in square exceeding 0.5 Sqm in each pane completed all as specified and directed. |
| 44 | S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceding 0.50 Sqm each pane complete allas specified and directedby Engineer-in-Charge Please Enable Macros to View BoQ information |
| 45 | S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceding 0.50 Sqm each pane complete allas specified and directedby Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender