Tender For Construction Work Of The Veer Shiromani Maharana Pratap Park In Gabhana Part A
Tender Value
1.87 Crore
Estimated cost
Bid Submission
14 Oct 2026
0 days left
EMD
3.75 Lakhs
Bank guarantee accepted
Document Fee
29500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Aligarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of The Veer Shiromani Maharana Pratap Park In Gabhana Part A
BOQ
| Sl. No. | Item Description |
| 1 | Boundary wall and Finishing Works |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge./All kinds of soil-DSR 2023 /2.6.1 |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge./All kinds of soil-DSR 2023 /2.6.1 |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.-DSR 2023 /2.25 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level/1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)-DSR 2023 /4.1.8 |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns etc. for mass concrete.-DSR 2023 /5.9.1 |
| 7 | Lintels, beams, plinth beams, girders, bressumers and cantilevers.-DSR 2023 /5.9.5 |
| 8 | Columns, Pillars, Piers, Abutments, posts and Struts-DSR 2023 /5.9.6 |
| 9 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level.:Concrete of M25 grade with minimum cement content of 330 kg /cum-DSR 2023 /5.33.1 |
| 10 | All works above plinth level upto floor V level: Concrete of M25 grade with minimum cement content of 330 kg /cum-DSR 2023 /5.33.2.2 |
| 11 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete./Thermo-Mechanically Treated bars of grade Fe-500D or more.DSR 2023 /5.22.6 |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)-DSR 2023 /6.1.2 |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand)-DSR 2023 /6.4.2 |
| 14 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)-DSR 2023/13.4.1 |
| 15 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : White sand stone - Exposed face machine cut and table rubbed with rough backing.:30 mm thick-DSR 2023 /8.14.4.5 |
| 16 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.-DSR 2023/8.15 |
| 17 | Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.-DSR 2023/8.16 |
| 18 | Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Wedge expansion type Fastener with threaded dia 6 mm-DSR 2023/8.8.1.1 |
| 19 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in Charge.: Polished Granite stone slab of colour Black, Cherry/ RubyRed or equivalent-DSR 2023/11.56.1 |
| 20 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.-DSR 2023/8.3.2 |
| 21 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.: In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works-DSR 2023 /10.25.2 |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture-DSR 2023/13.62.1 |
| 23 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:all kind of soil-DSR 2023/2.1.1 |
| 24 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge./With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25-Analysed Rate |
| 25 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level/1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)-DSR 2023/4.1.8 |
| 26 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.:80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.-DSR 2023 /16.91.2 |
| 27 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).-DSR 2023 /16.69 |
| 28 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 05 k.m. lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).-DSR/Hor-2025/2.25 |
| 29 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).-DSR/Hor-2025/2.1 |
| 30 | Rough dressing the trenched ground including breaking clods.-DSR/Hor-2025/2.5 |
| 31 | Fine dressing of the ground.-DSR/Hor-2025/2.7 |
| 32 | Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately): In rows 5 cm apart in both directions-DSR/Hor-2025/2.10.1 |
| 33 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%) flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge manure or extra earth to be paid for separately).-DSR/Hor-2025/2.13 |
| 34 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) Holes 45 cm dia, and 45 cm deep.-DSR/Hor-2025/2.14.4 |
| 35 | Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 nos horizontal & 4 nos vertical \\" U \\" shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.: Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm-DSR/Hor-2025/2.29.1 |
| 36 | Top inside dia 30 cm, outer bottom dia 20 cm, total height 30 cm with wall thickness of 25.4 mm-DSR/Hor-2025/2.29.2 |
| 37 | Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one part of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer in charge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 25 cm Top dia, 15 cm Bottom Dia & 25 cm Perpendicular height-DSR/Hor-2025/2.31.6 |
| 38 | Size of Empty Pots 35 cm Top dia, 25 cm Bottom Dia & 35 cm Perpendicular height-DSR/Hor-2025/2.31.7 |
| 39 | Plantation of Trees, Shrubs, Hedge, ground covers and seasonal plants at site i/c watering and removal of unsavariable material's as per direction of officer in charge (excluding cost of plant & water). Trees plant-DSR/Hor-2025/2.57.1 |
| 40 | Providing and stacking of Azadirachta indica (Neem) height 120-130cm in polybag size 25 cm as per direction of the officer-in-charge.-DSR/Hor-2025/7.5 |
| 41 | Providing and stacking of Cassia fistula (Amaltash) height 120-135 cm. in poly bag size 25 cm as per direction of the officer-in-charge.-DSR/Hor-2025/7.16 |
| 42 | Providing and stacking of Delonix regia (Gulmohar) height 150-165 cm. in poly bag size 25 cm as per direction of the officer-in-charge.-DSR/Hor-2025/7.24 |
| 43 | Providing and stacking of Adansonia digitata (kalp vriksh) ht. 150-165 cm in bag size 25 cm as per direction of the officer-in-charge.-DSR/Hor-2025/7.2 |
| 44 | Providing and stacking of Bauhinia blakeana (Kachnar) height 120-150 cm. in poly bag size 25 cm as per direction of the officer-in-charge.-DSR/Hor-2025/7.7 |
| 45 | Providing and displaying of Croton Petra Bangalore variety having ht 45 cm & above, well developed with fresh and healthy leaves in 20 cm size of Earthen pot/Plastic pot. & as per direction of the officer-in-charge. -DSR/Hor-2025/3.31 |
| 46 | Providing and displaying of Rhapis palm specimen plant, having ht. 1.50 m to 1.65 m with 40 to 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm size of Earthen Pot/Chali/Tray & as per direction of the officer-in-charge.-DSR/Hor-2025/3.71 |
| 47 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. -DSR/Hor-2025/5.12 |
| 48 | Providing and Displaying Travelers palm well developed with fresh & healthy leaves foliage 210 to 240 cm ht specimen plant in 40 cm Cement Pot as per direction of the officer-in-charge. -DSR/Hor-2025/5.43 |
| 49 | Providing and Displaying Washingtonia filifera palm well developed 90 to 105 cm ht. having 5 to 6 straight fresh and healthy leaves in 35 cm Cement Pot as per direction of the officer-in-charge. -DSR/Hor-2025/5.44 |
| 50 | Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.-DSR/Hor-2025/6.7 |
| 51 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-incharge.. -DSR/Hor-2025/6.12 |
| 52 | Complete maintenance of trees, jobs like making of basin at regular interval,application of fertilizer etc, (excluding the cost of material which shall be supplied by the department and other T & P material/articles shall be provided by the contractor) as per direction of officer in charge/Trees for 250 no/(up to 4 & up to 3 year Slow & Fast Per Plant/ growing group)-DSR/Hor-2025/2.42.1 |
| 53 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required), top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by officer-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide and plants will be provided by the department and lawn mover and brush cutter with fuel & other T & P material/articles shall be provided by the contractor).Public park. (2.00 Acres=One Mali) As per yard stick.-DSR/Hor-2025/2.40.6 |
| 54 | Providing and fixing Precast RCC/MS garden bench with backrest (approx 1.8x.5m) prainted/finish complete-Quotation |
| 55 | Supply & fixing of 12.5 mtr High mast shaft of approvedvmake with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect. Make Utkarsh, Bajaj, Myfair.(SOR 2018 Item no 651) |
| 56 | Supply and fixing following capacity of automaticstreet light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting oftime switch TSO 100 series with contactors, HRCfuses, isolating switch metering instrument &instrument box with CTs etc. in case of TPN,complete in all respect.(SOR 2018 Item no 807.(a) (ii) 15A SPN |
| 57 | Supply and fixing following capacity of automaticstreet light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting oftime switch TSO 100 series with contactors, HRCfuses, isolating switch metering instrument &instrument box with CTs etc. in case of SPN,complete in all respect.(SOR 2018 Item no 807.(d) (ii) 15A TPN |
| 58 | Supply and fixing of factory wired integral LEDflood light luminaires with die cast aluminiumhousing built with dirver set suitable for 140 to 150Watt. Confirming to IP 66 protection complete in all respect. Make Phillips, Bajaj, Goldwin.( With back choke). (SOR 2018 Item no 1454 CAT AAA) |
| 59 | Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all aroud and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(SOR 2018 Item no 501 (j) 25 sq. mm 3-1/2 core |
| 60 | Supply and Wiring of submains with two nos. of 2.5 sq. mm.FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge. (SOR 2018 Item no 289 (a). |
| 61 | Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.(SOR 2018 Item no 725 A) |
| 62 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.(SOR 2018 Item no 701) |
| 63 | Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect.(SOR 2018 Item no 717) |
| 64 | Supply and laying of 63mm Dia, Size Smooth HDPE Pipe ISI Marked Along with all accessories like socket, bend, couples etc. Confirming to ID Code 4984-2016 Part II complete with fitting and cutting, jointing etc. bln the existing trench/ existing hole made by trench less cutting complete as Required.(NNA Annual ract) |
| 65 | Supply and fixing of factory wired, bollard with clear/opal diffuser louvers stack extruded aluminium casted pole, base shall be factory painted polyster paint duly pre wired with ballast, ignitor, capacitor, suitable for 70 watt H.P.S.V. lamp including lamp complete in all respect.(SOR 2023-24 Item no 438(I) CAT AA |
| 66 | Supply and laying of aluminium conductor PVCinsulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.(SOR 2018 Item no 501(h)10 sq. mm 4 core |
| 67 | Supply and fixing of H.P.M.V. post top lantern, suitable for 80watts M.V. lamp complete with control gear pole mounting box with 80 watt M.V. lamp etc.complete in all respect.(SOR 2023-24 Item no 469 CAT AAA) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender