Tender For Upgradation Of Parks In Srinagar City
Tender Value
3.86 Crore
Estimated cost
Bid Submission
30 Oct 2026
0 days left
EMD
7.72 Lakhs
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Upgradation Of Parks In Srinagar City
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 10-Oct-2026 | Pre-Bid Meeting | Other | 30-Oct-2026 |
| 2 | 24-Oct-2026 | Extension Notice No 01 | Date | 30-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:4:8 or leaner mix (i/c equivalent design mix) |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.6.1 All kinds of soil |
| 4 | Providing and laying Stone Soling including carriage and as per direction of Engineer In-charge |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement lime mortar 1:1:6 ( 1 cement : 1 lime putty : 6fine sand) |
| 7 | CEMENT PLASTER (IN FINE SAND)12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 8 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.11.68.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. including Chamfering of edges |
| 9 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm |
| 10 | Providing & Laying 25mm Thick fine chisel dressed devri stone tile in cement mortar 1:4 above plinth level.(complete Job) |
| 11 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: |
| 12 | Providing and fixing 3-seater outdoor garden bench made of cast iron anti corrosive material with backrest & armrest to be fixed by anchoring over cement concrete including painting, polishing and all carriages upto site of work (complete job) |
| 13 | Supplying of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment |
| 14 | Spreading of good earth in required thickness as per directions of officer in-charge |
| 15 | Supplying of sludge, dump manure in required thickness as per directions of officer in-charge |
| 16 | Spreading of sludge, dump manure or/as per directions of officer in-charge |
| 17 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation |
| 18 | Rough dressing of the trenched ground including breaking clods. |
| 19 | Mixing earth and sludge or manure in proportion specified or directed by officer in charge. |
| 20 | Grassing with selection no. 1 grass including watering & maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds & fit for mowing including supplying of good earth if needed (the good earth shall be paid separately.)17.10.4 with grass turf |
| 21 | Providing and laying Coarse/Fine sand including carriage and as per direction of Engineer In-charge |
| 22 | Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800(part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level. 28.1.1.1 300 mm dia |
| 23 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire & labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in charge. 28.10.2 150 mm nominal size dia having minimum wall hickness 5.00 mm. |
| 24 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded ) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/plain bevel ended pipes (type A) of required dia, conforming to IS:8110,of reputed & approved make having wall thickness not less than 5.40mm, including painted with outside surface with two coats, of anticorrosive bitumestic paint of approved brand and manufacture including required hire & labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. 28.11.2 150 nominal size dia |
| 25 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS: 2800 (part 1). 28.15.2 150 mm dia |
| 26 | Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/medium/coarse in required grading and sizes as per actual requirement all complete as per direction of Engineerin-charge. |
| 27 | Providing and fixing M.S clamp of required dia to the top of casing/ housing pipe of tube well as per IS:2800 (part 1), including necessary bolts & nuts of required size complete: 28.14.2 150 mm clamp |
| 28 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe removable as per requirement all complete for bore well : 150 mm dia |
| 29 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc. 19.2.3.6 PN-10 pipe , 50 mm OD (SDR-11) |
| 30 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. External work including trenching, refilling etc. PN-16 pipe , 25mm OD (SDR-7.4) |
| 31 | Providing and fixing brass bib cock of approved quality 15 mm nominal bore |
| 32 | PPR Union 50 mm |
| 33 | PPR Union 25 mm |
| 34 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 35 | Preperation of beds/pits (as required) for plantation by excavating 60cm deep and trenching the exacavated base,refilling the excavated earth after breaking the clods and mixing with sludge of manure in the ratio of 8:1(8 parts of stacked volume of earth after reduction by 20%:1 PART OF STACKED volume of sludge or manure after reduction by 8%,) flooding with water , filling with earth if necessary watering and finally find dressing, levelling etc including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as per the directions of engineer in charge within a lead of 100m and lift upto 1.5m completed job(Cost of sludge ,manure or extra earth to be paid separately) |
| 36 | Thai Cypress, 2-3ft bushy |
| 37 | Red Maple, 3ft |
| 38 | Abelia grandiflora, 18in |
| 39 | Black Pine, 3ft |
| 40 | Standard Rose (Budded), 3ft |
| 41 | Flowering Apple (Ornamental) |
| 42 | F1 Hybrid Seedling |
| 43 | Osmanthus fragrans, 2ft branched |
| 44 | Silver Pine |
| 45 | Magnolia grandiflora |
| 46 | HT Rose, 12in (2-3 branched) |
| 47 | Golden Thuja, 2-3ft bushy |
| 48 | Canna Bulb (Red Flowers) |
| 49 | Green Maple, 3ft |
| 50 | Areca Palm, 2-3ft bushy |
| 51 | Hyacinth Bulb 14/18 |
| 52 | Araucaria, 2-3ft bushy |
| 53 | Clematis different colours, 18in |
| 54 | Loropetalum, 3ft branched |
| 55 | Wintersweet (Chimonanthus) |
| 56 | Canna Bulb (Variegated Leaves) |
| 57 | Lagerstroemia (Crape Myrtle) |
| 58 | Himalayan Cherry |
| 59 | Honeysuckle |
| 60 | Rose Top Secret (Red) |
| 61 | Rose Avalanche (White) |
| 62 | Hibiscus |
| 63 | Kerria japonica, 3ft |
| 64 | Hydrangea, 2ft |
| 65 | Rose Grand Gala |
| 66 | Cryptomeria |
| 67 | Cycas Palm, 2ft bushy |
| 68 | Flowering Cherry (Ornamental), 3ft |
| 69 | Cyclamen plant |
| 70 | Gold Crest (Lemon Cypress) |
| 71 | Lonicera nitida, 18in |
| 72 | Cypress Sempervirens (Italian), 3ft |
| 73 | Butia capitata, 2x2.5 |
| 74 | Camellia, 3ft |
| 75 | Guelder Rose, 2ft |
| 76 | Ficus benjamina, 3ft branched |
| 77 | Ficus elastica, 3ft branched |
| 78 | Herbaceous Peony |
| 79 | Thuja compacta, 2ft |
| 80 | Spiraea prunifolia, 3ft |
| 81 | Euonymus microphyllus, 10in bushy |
| 82 | Nandina domestica, 18in |
| 83 | Magnolia liliiflora, 3ft |
| 84 | Golden Shine Yellow |
| 85 | Myrtle, 18in |
| 86 | Japanese Quince, 2ft |
| 87 | Revival Pink |
| 88 | Asparagus, 1ft bushy |
| 89 | Buxus sempervirens, 18in |
| 90 | Weigela |
| 91 | Euonymus fortunei, up to 1ft |
| 92 | Ornamental Pomegranate, 18in |
| 93 | Laburnum, 3ft |
| 94 | Cherry Laurel, 18in |
| 95 | Celestial Bin 40 Ltrs stainless steel waste containers including fixing at site as per the directions of Engineer In Charge. |
| 96 | ILLUMINATION |
| 97 | Supply and erection of 4500mm double arm suspended high decorative pole (having aesthetic elements in both brackets and rings) of Royal/Bajaj/Surya/Dwarka/Hengle/Karare Mujasama or equivalent reputed make, made out of MS Pipe Ø76.1mm confirming to YSt 210, mounted on a concrete foundation. The base plate of the pole shall be E 250 grade MS 200mm x 200mm, 12mm thick confirming to IS2062:2011 shall be facilitated with elongated slots to suit the 300mm, J-type, M16 bolts, Grade 4.6 that shall be provided with suitable nuts and plain washers. The structurally sound pole emerging out of the base plate shall be architecturally designed with a decorative MS causeway base cover minimum Ø330mm x 500mm (H), above which the leaf decoration MS structure Ø150mm is aesthetically positioned. Mounted flower pot. The decorative components shall be fabricated/cast in MS as per approved design. A decorative MS embellishment is provided at appropriate height enhancing the decorative outlook of the pole. The pole welding shall be done with certified welders using a V groove technique with a high end MIG welding process. A base compartment with an MS door contoured to the pole's shape housing the gear tray, prewired with 2 way connector. The surface preparation of the pole & components shall be done by shot blasting which is environmentally safe eliminating the chemical and acid use and ensuring the thorough removal of impurities like, rust, oxides and other unwanted particles from the suface for high standard coating. The surface finish of the pole shall be Zinc rich primer coat & pure polyester powder coating or epoxy zinc phosphate primer followed by the environmentally stable Polyurethane based paint. Pole must be connected to earthing (Complete Job as per directions of Engineer In Charge) |
| 98 | Supply installation testing & commissioning of exterior Ornamental fixture for twin arm Poles of Philips/Surya/Hengle/Orient/ Bajaj or equivalent reputed make of system lumen output should not be less than 2000 lumen (Tolerance ±15%), the power consumption should be 50 watts(warm), 360° symmetrical optics, CCT 3000K. Single piece with circular shaped plant made of die cast aluminum using pressure die-casting process,with a decorative Top luminaire which is also made of die cast aluminum using pressure die-casting process, fixed on the top.Auxiliary and optical compartment can be accessed by tilting the top frame. Bottom frame in single piece, made of die cast aluminum using pressure die-casting process with a three curved uprights decorated which is also made of die cast aluminum using pressure die-casting process, fixed at the bottom with a hole (28 mm) for fixing to support. Frosted Screen made of polymethylmethacrylate (PMMA) moulded in a single piece using Injection moulding process. Screen's Impact resistance: IK06. Pure polyester powder coating in the same color as of the pole/as per the lighting consultant. Optical Compartment IP Rating - IP 66. Height – 800mm, Dia. - 400mm, Colour Rendering Index: Ra > 70. Electronic Power Supply for LED Module, which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection upto 4kv(an additional surge protection device of 10kV also provided in-built the fixture). Modular (2 X 2) refractive lens in PMMA with Type-II/III/IV photometric distribution options. protection screen in extra-clear tempered glass with impact resistance IK 08.LM80 (Complete Job as per directions of Engineer In Charge) |
| 99 | Supply, installation, testing & commissioning of 10 meter high decorative / ornamental high mast pole of Philips/Surya/Orient/Royal/Bajaj/Dwarka/Hengle/Karare Mujasama or equivalent reputed make made out of MS Pipe Ø76.1mm, YSt 210, surface mounted on concrete foundation with E250 grade MS base plate 200x200x12mm as per IS 2062:2011 with elongated slots for 300mm long J-type M16 bolts Grade 4.6 with nuts & washers, with decorative cast aluminium causeway base cover Ø330mm x 500mm(H) and leaf decoration structure Ø150mm with mounted flower pot, material ADC12/LM6, GDC embellishment, V-groove MIG welding with certified welders, base compartment with die-cast aluminium door housing gear tray prewired with 2-way connector, shot blasted surface preparation, Zinc rich primer + pure polyester powder coating / epoxy zinc phosphate + Polyurethane paint, earthing connection complete, along with 6-8 Nos. 200W LED Flood Light with adjustable bracket having 0° to 90° vertical tilt adjustment in steps of 10 degrees, Pressure die-cast Aluminium housing, IP66, IK08, 200W, 26000-30000 lumens, 6000K, CRI>70, 4KV inbuilt surge protection, internal wiring from base to top, mounted on MS Heavy Duty Circular Frame/ Four-Sided Square Frame / Three-Sided Triangular Frame Flood Light Mounting 2-Tier Bracket (Up-Down) for 6-8 flood lights, including all hardware. (lights orientation and bracket design as per directions of Engineer In Charge). |
| 100 | Laying of RCC foundation for Ornamental/ decorative poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12/10 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole). |
| 101 | Supply, Installation, Testing and Commissioning of 10 Amp C-Curve MCB 10KA,4-way terminal block / connectors Incl. copper lugs, Clamps ,nuts & bolts washers.(Complete Job as per directions of Engineer In Charge) |
| 102 | Supply, Installation, Testing and Commissioning of 70 Sqmm 3.5 Core Cable,1.1kV Grade, Armoured, XLPE Insulated Stranded Aluminium Conductor FRLS to be carried through conduit/pipe U/G (Complete Job as per directions of Engineer In Charge) |
| 103 | Supply, Installation, Testing and Commissioning of 70 mm² 1.1 KV Heat Shrinkable Cable Termination Kits (Complete Job as per directions of Engineer In Charge) |
| 104 | Supply, Installation, Testing and Commissioning of 50 Sqmm 3.5 Core Cable,1.1kV Grade, Armoured, XLPE Insulated Stranded Aluminium Conductor FRLS to be carried through conduit/pipe U/G (Complete Job as per directions of Engineer In Charge) |
| 105 | Supply, Installation, Testing and Commissioning of 50mm² 1.1 KV Heat Shrinkable Cable Termination Kits (Complete Job as per directions of Engineer In Charge) |
| 106 | Supply, Installation, Testing and Commissioning of 35 Sqmm 4 Core Cable,1.1kV Grade, Armoured, XLPE Insulated Stranded Aluminium Conductor FRLS to be carried through conduit/pipe U/G (Complete Job as per directions of Engineer In Charge) |
| 107 | Supply, Installation, Testing and Commissioning of 35 mm² 1.1 KV Heat Shrinkable Cable Termination Kits (Complete Job as per directions of Engineer In Charge) |
| 108 | Supply, Installation, Testing and Commissioning of 10 Sqmm Cable 4 Core 1.1kV Grade,Armoured, XLPE Insulated Stranded Aluminium Conductor FRLS type including thimbles,lugs,tape (Complete Job as per directions of Engineer In Charge) |
| 109 | Supply and Laying of DWC HDPE PE 80 PN 6 DN 110MM pipe 50 mm Outer Dia including trench excavation in hard soil (0.3x0.45x1000m) for laying of Almunium armoured cable . The job further includes making of 4 No. Brick Masonary Chamber (600x600x600) mm with Cast Iron cover in CI Frame, refilling the excavated material back and removal of surplus excavated material to an appropriate place including reinstatement of road to its original state (Complete Job as per directions of Engineer In Charge) |
| 110 | Supply, Installation, Testing and Commissioning of Earthing of Poles Complete by GI Rod 20mm 3 mtr long with GI Strip (25x3)mm (Complete Job as per directions of Engineer In Charge) |
| 111 | Supply, Laying, Testing and Commissioning of 1.5 Sqmm Single Core PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly (Complete Job as per directions of Engineer In Charge) |
| 112 | Supply, Laying, Testing and Commissioning of 2.5 Sqmm Single Core PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary individual circuit including loop & earthings laid properly (Complete Job as per directions of Engineer In Charge) |
| 113 | Supply, Installation, Testing and Commissioning of Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel 415V, 3 Phase, 4 Wire, IP55, size 450mm x 300mm x 250mm with front door opening, CRCA 1.6mm thick sheet, duly powder coated. The panel shall be provided with inbuilt 2 No TPN 63 Amp MCCB, 2 No TPN 40 Amp MCCB, Astronomical Timer, TPN 100 Amp busbars, 3 Phase Over Voltage SPD 415V, Complies to IEC 61643-11, with 32A MCB and inbuilt health indicator for protection against over voltage and neutral failure. The panel shall be installed on cement concrete block with 4 Nos angle iron legs including skirting, iron legs grouted in the cement concrete with required cable glands and locking arrangement. (Complete Job as per directions of Engineer In Charge) |
| 114 | Providing, Fixing, Testing and Commissioning of AAS3 + AWM3 Outdoor warm LED Profile Light* 20 Watt/Mtr, LED, 2400K, 120° Degree – Opal Encapsulated 1000lm/Mtr, CRI>80, IP67 as per the specifications and directions of Engineer In Charge) |
| 115 | Supply installation, testing and commissioning of 3 Core 2.5 Sqmm XLPE Armoured Copper Cable. |
| 116 | Supply, Installation, Testing and Commissioning of 65W LED warm flood light. Fixture of Philips/Surya/Hengle/Orient/Bajaj or equivalent reputed make brand with 4KV inbuilt surge protection, with adjustable beam angle of 30 to 90 degrees, Ingress protection of IP 65/67 for the optical part and the driver suitable for exterior grade installations subject to approval of client and the specifications to be approved by client before procurement.(Complete Job as per directions of Engineer In Charge) |
| 117 | Supply, installation, testing and commissioning of 1000mm high cylindrical LED electric lighting bollard of Crompton/Surya/Hengle/Orient/ Bajaj or equivalent reputed make, extruded die-cast aluminium body with dark bronze/antique brown powder coated finish, IP65 & IK08 rated, fitted with 12W to 15W inbuilt LED module, 3000K warm with 2-band frosted polycarbonate diffuser for 360° illumination with 4KV inbuilt surge protection, internal wiring from driver to LED module, complete with bolt-down base plate, M10 anchor fasteners.( Design to be approved by SSCL and as per directions of Engineer In Charge) |
| 118 | Supply, Installation, Testing & Commissioning of Circular Water Fountain Feature around existing Chinar tree with 4ft wide water channel between two circular marble-clad RCC M25 walls (Inner Dia 6ft, Outer Dia 14ft, Depth 3ft) including 75mm PCC 1:4:8, 100mm RCC M25 base slab and 100mm RCC M25 walls reinforced with 8mm dia @150mm c/c with waterproofing compound conforming to IS 2645, 12mm plaster with 2 coats of Fosroc Brushbond RFX / Dr Fixit Pidifin 2K / Sika Topseal 107 waterproofing, 18mm thick Rajnagar white marble cladding on both inner and outer walls including top coping with rounded moulding, Plumbing system with 65mm UPVC 10kg main ring header, 25mm & 20mm branch piping, 12 Nos x 1 inch Brass Foam Nozzle (Thick throw, 1.2-2 ft height, 30 LPM) on outer row and 12 Nos x 1/2 inch Brass Comet Nozzle (Thin throw, 2.5-3.5ft height, 10 LPM) on inner row in zig-zag pattern such that one thin throw nozzle falls exactly between two thick throw nozzles, with all heavy duty brass fittings, ball valves, SS 304 strainer basket, 50mm overflow and drain arrangement with SS grating, Pumping system with 1 No x 3.0 HP Centrifugal Monoblock Pump (CRI/Lubi/Crompton/Kirloskar or equivalent) suitable for 480 LPM @ 18m head with 2.5 sqmm 3-core XLPE armoured submersible cable, CI foot valve, NRV and all accessories, Electrical & Lighting with 16 Nos x 9W RGB Warm White SS316 IP68 underwater lights (12 for thick, 4 for focus) (Philips/Hengle/Surya/Orient/Bajaj or equivalent) with 3-core 2.5 sqmm XLPE armoured submersible cable, Outdoor IP55 Control Panel comprising of MCB, Contactor, Timer, RGB Controller with remote, Float Switch for auto dry-run protection, Single Phase Preventer, 30mA RCCB/ELCB for safety, 1 No Chemical Earthing Pit as per IS:3043 with 25x3mm GI strip upto panel with earth resistance below 5 ohms and testing, Complete job including pebble filling with washed river pebbles over earth fill in 3ft breathing zone around tree trunk with 100mm dia perforated PVC root aeration pipe, water filling, hydraulic testing, commissioning to achieve uniform flow at velocity 0.5 m/Sec, curing, cleaning, Complete Waterproofing Job. Design to be approved by SSCL before procurement (complete job as per directions of Engineer-in-Charge). |
| 119 | Supply, Installation, Testing and Commissioning of decorative illuminated single tree using high-quality, outdoor-rated RGB LED lighting. LED RGB STRIPS Type: IP67 Outdoor-Rated RGB Strip Lights Length: 5 Meters per Strip (Total 50 Meters Coverage) LED Type: High-Brightness, Energy-Efficient SMD LEDs Mounting: Flexible, for Wrapping around Branches and Trunk Tree Structure: Item includes supply and installation of artificial/decorative tree structure (Trunk, branches, base) of Total Height 4.5 Mtr from base plate to top center with Trunk height of 2 Mtr. (Design to be approved by Engineer In-Charge) CONTROLLER RGB/DMX Controller & Programming Controller: 1 No. Fully Compatible with IP67 Strips Programs: 250+ Color Sequences and Effects (Static, Dynamic, Chase, Fade, Music Sync) Control Options: Remote or Wi-Fi App Based. POWER SUPPLY & ACCESSORIES Power Supply: Outdoor Weatherproof SMPS, 12V / 24V as per Load Wiring: 10 Meters of IP67 Input Power Cable; Outdoor-Grade 2-Core / 4-Core Cables Connectors: Waterproof Connectors and Splitters for Quick Installation Fixing: Clips and Cable Ties for Secure Mounting Installation Support: Mounting Guidance and Connection Diagram for Easy Setup GENERAL SPECIFICATIONS Ingress Protection: IP67 – Fully Rainproof Operating Voltage: Safe Low-Voltage Operation Power Consumption: Approx. 300–350W per Tree Color Modes: 16M+ Colors with Dimming and Transition Effects Programmable: Customizable Color Sequences for Festivals, Events and Daily Themes SCOPE OF SUPPLY Inclusive of Artificial Decorative Tree Structure (Trunk, branches, Leaves, base), 10 Strips, Controller, Power Supply, Wiring, Connectors and Programming. (Design to be approved by SSCL and as per Directions of Engineer in Charge) |
| 120 | Supplying, installation, testing & commissioning of submersible bore well pump set for water supply system having of suitable 2 HP, single phase 415 volts AC, induction submersible motor directly coupled with solid coupling multi-stage submersible pump discharge capacity of 20000 litre per hr in borewell etc. as required of Kirloskar /Crompton/ or equivqlent reputed brand including drilling, fixing of 65 mm dia medium class G.I pipe with socket and all necessary Tee, bend, socket in the suction/delivery line including cutting, threading, etc. as required. (Make:TATA/JINDAL/ or equivalent) including fixing of holding clamp made out of 50mmx6mm MS flat iron suitable for 65 mm dia G.I pipe as reqd, 65mm G.M. Non Return valve (ISImark) in the suction/delivery line etc.as required. (Make:Zolota/Leader/Sant/ or equivalent), 3 core x 4 sq.mm submersible cable (flat cable) of ISI mark in G.I pipe/along the pipe/surface for connection of submersible pump set etc. as required with single phase Submersible pump starter with voltmeter, ammeter (L & T MU-G6) on the wall etc as required, 6mm dia.steel rope along wing G.I pipe for protection of submersible motor pump set as reqd, including fixing of 32mm dia G.I pipe (medium class) in ground or surface for the protection of submersible cable including necessary bend etc as reqd. (Make:TATA/Jindal/ or equivalent reputed brand), including earthing using 20 mm GI Rod 3 mtr long through GI Strip (Complete Job as per directions of Engineer In Charge) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 10, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 30, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Oct 30, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender