Tender For Repairs And Painting Of Certain Steel Furniture Under Ge Missamari
Tender Value
45 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs And Painting Of Certain Steel Furniture Under Ge Missamari
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | ALMIRAH STEEL MEDIUM (Drg No. FD- 243/1032) |
| 2 | M&L for removing dents and bends and carrying out welding wherever required to Almirah Steel Medium including scraping of old painted surfaces and removal of existing paint by application of suitable chemical/aerosol paint remover spray. Preparing the surfaces, including application of putty and red oxide primer, followed by spray painting of the Almirah Steel Medium both inside and outside, with one coat of approved synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.Note : (a) Color : Olive Green or any other colour or combination of colours as directed by Engr-in-Charge. (b) Measurement: The Almirah Steel Medium shall be measured as one complete unit. |
| 3 | M&L for replacement of existing old lock with new 7-lever Godrej pattern lock of approved make and best quality, complete with two duplicate stainless steel keys, including removal of existing lock and fixing of new lock, complete all as specified and as directed. |
| 4 | M&L for removing existing old/unserviceable 3-way locking device and supplying and fixing new 3-way locking device of approved Best Quality, including all necessary materials, fittings, fastenings and accessories, complete in all respects as specified and as directed. |
| 5 | M&L for removing existing old/rusted and unserviceable legs and supplying and fixing new legs fabricated from 1.5 mm thick PBI sheet, cut and formed to the required shape and size as per drawing, duly welded to the bottom frame in place of the existing legs. The new legs shall be properly prepared and finished and given one coat of red oxide primer followed by two coats of olive green paint of 1st Grade Quality, applied by spray machine over properly prepared surfaces to match the existing finish, complete in all respects as specified and as directed. |
| 6 | S&F chromium plated steel handle, 100 mm size, complete with nuts and washers, including removal of existing old/unserviceable handle, nuts and washers, complete all as specified and as directed. |
| 7 | ALMIRAH STEEL LARGE (Drg No. FD-351/1031) |
| 8 | M&L for removing dents and bends and carrying out welding wherever required to Almirah Steel Large, including scraping of old painted surfaces and removal of existing paint by application of suitable chemical/aerosol paint remover spray. Preparing the surfaces, including application of putty and red oxide primer, followed by spray painting of the Almirah Steel Large, both inside and outside, with one coat of approved synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.Note : (a) Color : Olive Green or any other colour or combination of colours as directed by Engr-in-Charge. (b) Measurement: The Almirah Steel Large shall be measured as one complete unit. |
| 9 | M&L for replacement of existing old lock with new 7-lever Godrej pattern lock of approved make and best quality, complete with two duplicate stainless steel keys, including removal of existing lock and fixing of new lock, complete all as specified and as directed. |
| 10 | M&L for removing existing old/unserviceable 3-way locking device and supplying and fixing new 3-way locking device of approved Best Quality, including all necessary materials, fittings, fastenings and accessories, complete in all respects as specified and as directed. |
| 11 | M&L for removing existing old/rusted and unserviceable legs and supplying and fixing new legs fabricated from 1.5 mm thick PBI sheet, cut and formed to the required shape and size as per drawing, duly welded to the bottom frame in place of the existing legs. The new legs shall be properly prepared and finished and given one coat of red oxide primer followed by two coats of olive green paint of 1st Grade Quality, applied by spray machine over properly prepared surfaces to match the existing finish, complete in all respects as specified and as directed. |
| 12 | S&F Chromium plated steel handle, 100mm size, complete with nuts and washers, including removal of existing old/unserviceable handle, nuts and washers, complete all as specified and as directed. |
| 13 | LOCKER STEEL (Drg No. FD-257/1029) |
| 14 | M&L for removing dents and bends and carrying out welding wherever required to Locker Steel, including scraping of old painted surfaces and removal of existing paint by application of suitable chemical/aerosol paint remover spray. Preparing the surfaces, including application of putty and red oxide primer, followed by spray painting of the Locker Steel, both inside and outside, with one coat of approved synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.Note : (a) Color : Olive Green or any other colour or combination of colours as directed by Engr-in-Charge. (b) Measurement: The Locker Steel shall be measured as one complete unit. |
| 15 | S&F chromium plated hasp and staple, 100 mm long, including removal of existing old/unserviceable hasp and staple, complete in all respects as specified in the drawing and as directed |
| 16 | Removal of old unserviceable conduit pipe and supply and fixing of new conduit pipe of the same size, comprising 19 mm dia chromium-plated steel conduit pipe of 1.60 mm wall thickness, complete with necessary brackets, fittings and accessories, all complete as specified in the drawings and as directed by the Engineer-in-Charge. |
| 17 | TABLE OFFICE CLERK (Drg No. FD-381/1004) |
| 18 | M&L for removing dents and straightening bends and carrying out welding wherever required to Table Office Clerk, including scraping of old painted surfaces and removal of existing paint by application of suitable chemical/aerosol paint remover. Preparing the surfaces, including application of putty and one coat of red oxide primer, followed by spray painting of the Table Office Clerk, both inside and outside, with one coat of approved synthetic enamel paint, complete in all respects as specified and as directed by the Engineer-in-Charge.Note : (a) Colour : Olive Green or any other colour or combination of colours as directed by Engr-in-Charge. (b) Measurement: TheTable Office Clerk shall be measured as one complete unit. |
| 19 | M&L for removing existing old/unserviceable locks and supplying and fixing new brass locks of approved Best Quality, complete with duplicate keys, including all necessary fittings and fastenings, complete in all respects as specified and as directed. |
| 20 | M&L for removing existing old and unserviceable top and supplying and fixing new top made of 18 mm thick pre-laminated particle board, exterior grade, ISI marked, with teak face and PVC edging all around, including cutting, fitting, fixing and all necessary materials and accessories, complete in all respects as specified and as directed. |
| 21 | TABLE OFFICE OFFICER (STEEL) (Drg No. FD-84(M)/1003) |
| 22 | M&L for removing dents and straightening bends and carrying out welding wherever required to Table Office Officer (Steel), including scraping of old painted surfaces and removal of existing paint by application of suitable chemical/aerosol paint remover. Preparing the surfaces, including application of putty and one coat of red oxide primer, followed by spray painting of the Table Office Officer (Steel), both inside and outside, with one coat of approved synthetic enamel paint, complete in all respects as specified and as directed by the Engineer-in-Charge.Note : (a) Colour : Olive Green or any other colour or combination of colours as directed by Engr-in-Charge. (b) Measurement: TheTable Office Officer (Steel) shall be measured as one complete unit. |
| 23 | M&L for removing existing old/unserviceable locks and supplying and fixing new brass locks of approved Best Quality, complete with duplicate keys, including all necessary fittings and fastenings, complete all as specified and as directed. |
| 24 | M&L for removing existing old and unserviceable top and supplying and fixing new top made of 18 mm thick pre-laminated particle board, exterior grade, ISI marked, with teak face and PVC edging all around, including cutting, fitting, fixing and all necessary materials and accessories, complete all as specified and as directed. |
| 25 | CHAIR VERANDAH (STEEL) (Drg No. FD-19(M)/FD-359) |
| 26 | Re-canning of Chair Verandah (Steel) including removal of existing cane and carrying out necessary welding and repairs wherever required, removal of rust and old paint, preparation of surfaces and painting with two coats of approved synthetic enamel paint over one coat of primer. Providing and fixing new white plastic cane of approved quality, 3.5 to 4 mm wide, half-round type, for seat and back, properly woven and fixed complete. Also providing and fixing 4 Nos. hard rubber/PVC shoes to the legs, 20 mm dia, after removal of existing old/unserviceable shoes, complete in all respects as shown on drawing and as directed by the Engineer-in-Charge.Note : Plastic cane shall be of superior quality, Type-I HDPE, white or cream colour, of uniform width, conforming to IS 5387. |
| 27 | TEAPOY VERANDAH/ TEAPOY VERANDAH MAP (Drg No. FD-255/ FD/E6/MAP/17) |
| 28 | M&L for removing existing old and unserviceable top and supplying and fixing new top made of 18 mm thick pre-laminated particle board, exterior grade, ISI marked, with teak face and PVC edging all around, including cutting, fitting, fixing and all necessary materials and accessories, complete in all respects as shown on drawing and as directed. |
| 29 | M&L for removing existing old paint from Teapoy Verandah, preparing the surfaces including applying putty and one coat of approved primer, followed by applying two coats of 1st Grade Quality synthetic enamel paint, white colour with glossy finish, by spray machine. Also including removal of existing old/unserviceable shoes and supply and fixing new hard rubber/PVC shoes to the legs, complete in all respects as shown on drawing and as directed. |
| 30 | CHARPOY GI PIPE (Drg No. FD-220) |
| 31 | M&L for carefully removing the existing old/unserviceable long rail of charpoy and supplying and fixing new long rail, including tightening and securing of all joints and refitting/reassembling all components, ensuring that every part is kept intact and properly aligned, complete in all respects as shown on the drawing and as directed. |
| 32 | All as per Item 8.01 above, but for short rails of charpoy retrieved from the existing unserviceable/replaced long rails. |
| 33 | All as per Item 8.01 above, but for legs retrieved from the existing unserviceable/replaced short rails, including necessary cutting, shaping, fitting and fixing, and providing and fixing 2nd Class hardwood wherever required for the leg. |
| 34 | All as per Item 8.01 above, but for S & F of new 32mm dia GI Medium Grade 3 way elbow ISI marked. |
| 35 | All as per Item 8.01 above, but for S & F of new 5 mm thick check nut suitable for 32 mm dia GI medium grade pipe |
| 36 | M&L for carefully removing the existing old/unserviceable plytop and supplying and fixing new 12 mm thick BWR plywood, exterior grade, of approved quality, including cutting to required size and shape, smoothening of edges and rounding of corners. The plywood shall be securely fixed to the charpoy frame with flush-headed bolts and nuts complete with washers, including spot welding wherever required, complete in all respects as specified and as directed by the Engineer-in-Charge.Note : Tightening and securing of the existing charpoy frame after replacement of the parts covered under Items 8.01 to 8.05 shall be deemed to be included in this item and shall be carried out before fixing the new plywood top. |
| 37 | CHARPOY MS SQUARE TUBE PLY TOP (Drg No. CESZ/TEZ/04) |
| 38 | M&L for removing existing old paint from charpoy, preparing the surfaces including carrying out welding wherever required to legs/rails, application of putty and one coat of red oxide primer, followed by application of two coats of approved synthetic enamel paint, black colour, to match the existing finish and standard drawing. Including removal of existing old/unserviceable rubber shoes and supplying and fixing 4 Nos. hard rubber shoes to the legs of each charpoy, complete in all respects as specified in the standard drawing and as directed. |
| 39 | M&L for carefully removing the existing old and unserviceable head board and supplying and fixing new head board made of 18 mm thick pre-laminated particle board, exterior grade, ISI marked, with teak face and PVC edging all around, including cutting, shaping, drilling, fitting and fixing complete with all necessary materials, complete in all respects as specified and as shown on the drawing and as directed. |
| 40 | M&L for carefully removing the existing old and unserviceable foot board and supplying and fixing new foot board made of 18 mm thick pre-laminated particle board, exterior grade, ISI marked, with teak face and PVC edging all around, including cutting, shaping, drilling, fitting and fixing complete with all necessary materials, complete in all respects as specified and as shown on the drawing and as directed. |
| 41 | M&L for removing the existing old and unserviceable plytop of MS square tube charpoy and supplying and fixing new 12 mm thick BWR plywood of exterior grade and approved quality, cut to the required size and shape, with edges properly finished, and securely fixed to the existing MS square tube frame with 4 mm dia screws and washers, including drilling, cutting, fitting, fixing and all necessary materials and accessories, complete in all respects as specified and as directed |
| 42 | CHARPOY IP HARD TOP (Drg No. FD/MAP-II/01) |
| 43 | M&L for removing existing old paint from charpoy, preparing the surfaces including carrying out welding wherever required to legs/rails, application of putty and one coat of red oxide primer, followed by application of two coats of approved synthetic enamel paint, black colour, to match the existing finish and standard drawing. Including removal of existing old/unserviceable rubber shoes and supplying and fixing 4 Nos. hard rubber shoes to the legs of each charpoy, complete all as specified in the standard drawing and as directed. |
| 44 | M&L for carefully removing the existing old and unserviceable plytop of Charpoy IP Hard Top and supplying and fixing new 12 mm thick BWR plywood, exterior grade, of approved quality, cut to the required size and shape, with edges neatly finished, and securely fixed to the existing frame with 4 mm dia screws complete with washers, including all necessary drilling, cutting, fitting, fixing and incidental works, complete in all respects as specified and as directed. |
| 45 | BED HARD STEEL (Drg No. FD/E6/MAP/08) |
| 46 | M&L for removing existing old paint from the legs and rails of charpoy, including carrying out welding and necessary repairs wherever required, preparing the surfaces, applying putty and one coat of red oxide primer, followed by two coats of approved synthetic enamel paint, black colour, to achieve a smooth and uniform finish conforming to the standard drawing, complete in all respects as specified and as directed. |
| 47 | M&L for carefully removing the existing old and unserviceable head board and supplying and fixing new head board made of 18 mm thick pre-laminated particle board, exterior grade, ISI marked, with teak face and PVC edging all around, including cutting, shaping, drilling, fitting and fixing complete with all necessary materials, complete all as specified and as shown on the drawing and as directed. |
| 48 | M&L for carefully removing the existing old and unserviceable plytop of Bed Hard Steel and supplying and fixing new 12 mm thick BWR plywood, exterior grade, of approved quality, cut to the required size and shape, with edges neatly finished, and securely fixed to the existing frame with 4 mm dia screws complete with washers, including S & F new hard rubber shoes (04 Nos) for each bed after removing the existing ones, complete in all respects as specified and as directed. |
| 49 | M&L for carefully removing the existing old and unserviceable plytop of Bed Hard Steel and supplying and fixing new 12 mm thick BWR plywood, exterior grade, of approved quality, cut to the required size and shape, with edges neatly finished, and securely fixed to the existing frame with 4 mm dia screws complete with washers, including all necessary drilling, cutting, fitting and fixing. Also including removal of existing old/unserviceable rubber shoes and supplying and fixing 4 Nos. new hard rubber shoes to each bed, complete in all respects as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender