Tender For Provision Of 10 Sentry Posts At Manasbal Grn/ Cobs Under Ge 970 Ews
Tender Value
29.30 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
9 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of 10 Sentry Posts At Manasbal Grn/ Cobs Under Ge 970 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr deep in soft and loose soil for foundation, etc o for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specfied and directed. |
| 2 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation filling & mass concrete complete all as specfied and directed. |
| 3 | Use & Waste form work of rough and finished to sides of concrete foundation, footings, base of column and plinth beams etc complete all as specified and as directed. |
| 4 | S&F of TMT bar 10 mm dia and over upto cut to length bent shape required inlcuding cranking , bending spirally for hooping for column, hooking ends and binding with and inlcuding mild steel wire not less than 0.9 mm dia, securing with clips quality conforming to fe 415.complete all as specified and as directed. |
| 5 | S&F of TMT bar 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders.complete all as specified and as directed. |
| 6 | M&L RCC nominal mix (1:1½:3) type A1 using 20mm graded stone aggregate for foundation , including rafts, footings, foundation beams, plinth beams, base for column , piles and mass concrete all as directed. |
| 7 | M&L RCC nominal mix (1:1½:3) type A1 using 20mm graded stone aggregates for Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 8 | M&L Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete, all as per specified and directed. |
| 9 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 10 | S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 11 | M&L for moorum/red bazri filling under floors and pavings in layers n.exc 15 cm thick spread and levelled complete all as per specified |
| 12 | M&L Hard core of gauge n exc 63mm deposited and spread and levelled in layer n exc 15 cm thick watered and rammed to a true surface complete, all as per specified and directed. |
| 13 | M&L PCC 75mm thick type C2 1:3:6 (40mm graded stone aggregate ) as in plinth protection |
| 14 | M&L PCC 100mm thick type C2 1:3:6 (40mm graded stone aggregate ) as in sub base and finished the surface rough to receive base complete all as specified and as directed |
| 15 | M&L for PCC 1:2:4 type B1 (20mm graded stone aggs) 40 mm thick as in floor complete all as specified and directed. |
| 16 | M&L for plastering 15 mm thick in CM 1:4 on other than fair faces of brick or concrete surfaces etc all as specified |
| 17 | M&L for plastering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces etc finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for plastering 5 mm thick in CM 1:3 on fair faces of brick or concrete on ceiling finish even and smooth without using extra cement complete all as specified and directed. |
| 19 | Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick completed, all as specified and as directed. |
| 20 | Removal of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m the above starting point. all as specified and as directed |
| 21 | M&L preparation of newly plastered surface of wall and apply two coat of cement base paint over a coat of Priming paint complete all as specified and directed. |
| 22 | M & L preparation of newly plastered surface of wall and apply two coat of OBD over a coat of Priming paint complete all as specified and directed. |
| 23 | M&L for preparing newly plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 24 | M&L for preparing new steel & iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide /zinc chrome primer complete all as specified. |
| 25 | M&L for roof trusses(framed) quality FE 410-W(Gde-E-250) quality A, trussed, purlins, crane gantries, rails and fastenings and heavy brackets, framing (Beam, tee, angle, channel or flat sections) including distance pieces , cleats etc all complete all as specified and as directed. |
| 26 | M&L hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts all as specified and as directed |
| 27 | M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed |
| 28 | M&L RCC (1:1½:3) type A1, using 12.5mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed |
| 29 | M&L RCC nominal mix (1:1½:3) type A1, using 12.5mm graded stone aggregates for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed. |
| 30 | M&L RCC nominal mix (1:1½:3) type A1, using 12.5mm graded stone aggregates for Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 31 | M&L small articles such as metal switch blocks,hardware as in truss hooks with not exc width 10 cm red oxiode zinc chrome synethic enamels all as specified and as directed. |
| 32 | Use & Waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter in fair finished surfaces |
| 33 | Use & Waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) in fair finished surfaces all as specified and as directed |
| 34 | Use & Waste formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, in fair finished surfaces all as specified and as directed |
| 35 | M&L formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified and as directed in fair finished surfaces all as specified and as directed |
| 36 | M&L for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLSH) drawn through and including PVC concealed conduit 19/20 mm bore (ISI marked) and accessories (concealed in wall & surface in ceiling complete including cutting ,chases & making good disturbed surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLSH), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan/exhaust point / bell push point controlled by one way switch 5 Amps and/or through regulator complete. |
| 37 | All as per the item No.36 above, but One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size complete, all as specified and directed. |
| 38 | S&F of Switch socket combination 2 in 1, 5 A flush type, complete, all as specified and directed. |
| 39 | S&F of Switch Piano, flush type single pole, one way 5 Amp complete, all as specified and directed. |
| 40 | M&L Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified. |
| 41 | Supply & fix LED tube light along with fixture, 20 Watts, 4 feet, complete, all as specified and directed. |
| 42 | S&F of Air Circulator fans 230 volts single phase oscillating of sweep size 300 mm suitable for wall mounting complete, all as specified and directed. |
| 43 | S&F of Single Pole and Neutral, Single Door, 240 V, 4 way with 200 amps rated bus bar Sheet Metal Enclosure for MCBs complete, all as specified and directed. |
| 44 | S&F of SPN 32 Amp, 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning complete, all as specified and directed. |
| 45 | S&F of SP 5 to 32 Amp, 240V, 10KA 'C' curve miniature circuit breaker (MCB) complete with connection testing and commissioning complete, all as specified and directed. |
| 46 | River sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and stretching the cable, complete. Note :- For payment purpose punned thickness shall be measured |
| 47 | M&L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete. |
| 48 | M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 6 sq. mm 2 Core complete, all as specified and directed. |
| 49 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender