Tender For Provision Of Toilets At Various Locations At Af Stn Dinjan Under Ge (Af) Mohanbari
Tender Value
43.50 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
0 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dibrugarh → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Provision Of Toilets At Various Locations At Af Stn Dinjan Under Ge (Af) Mohanbari
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.50 m wide and not exceeding 1.50m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 3 | Excavation in trenches exc 1.50 m wide and exc 1.50m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed. |
| 5 | Removing excavated soil material n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 6 | M&L for Hardcore of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 7 | M&L Plain cement concrete 1:4:8 type D-2 using 40 mm graded crushed/ broken stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 8 | M&L for Brick work with old size sub class \\"B\\" bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 9 | M&L for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick walls complete all as specified and directed. |
| 10 | S&F for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally for hooping looking for columns, beam, slab etc. hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 11 | S&F for TMT steel bars 6 to 8 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length, bent to shape required including cranking, bending spirally for hooping looking for columns, hooking ends and binding with MS wire (annealed not less than 0.9 mm dia) complete all as specified and directed. |
| 12 | M&L for formwork to flat fair finished surfaces of concrete of foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter complete all as specified and directed. |
| 13 | M&L for formwork to sides of pillars, post, struts, piers, columns and stanchions complete in flat fair finished surfaces of concrete complete all as specified and directed. |
| 14 | M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs etc omplete in flat fair finished surfaces of concrete complete all as specified and directed. |
| 15 | M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as Foundation, including rafts, footing, foundation beams, plinth beams; bases for column, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. |
| 16 | M&L for reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 17 | M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed. |
| 18 | M&L for reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in chajjas complete all as specified and directed. |
| 19 | M&L for reinforced cement concrete design mix M-25 ( using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed. |
| 20 | M&L for 75 mm thick plain cement concrete (1:3:6) Type C2 using 20 mm graded aggregates as in plinth protection/paving including finishing surface even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L for PCC 1:2:4 type B-0 using 20mm graded stone aggregate as in lintel up to 1.5m clean spen, cills, steps, bands, incl weathering, slightly rounded or chamfered angles, throating and dirceted and other similar works including necessary form work complete all as specified and directed. |
| 22 | M&L for rendering 10 mm thick in cement mortor 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for rendering 20 mm thick in two layers (12mm + 8mm) externally on fair faces of brickwork or concrete surfaces in cement mortar 1:4 and finished the surfaces even and smooth without using extra cement mixed with water proofing compound @ 200 ml per 50 kg of cement on top layer of 8 mm thick complete all as specified and directed. |
| 24 | M&L for rendering 5mm thick in cement mortar 1:3 on concrete as in ceiling surface etc finished fair and even without using extra cement complete all as specified and directed. |
| 25 | M&L for preparation of newly plastered wall or concrete surafces and applying two coats of oil emulsion distemper over a coat of cement primer over a coat of 1 mm thick wall care putty, over 10 cm width or girth complete all as specified and directed. |
| 26 | Supply only liquid water proofing compound complete all as specified and directed. |
| 27 | M&L for preparation of newly plastered wall or concrete surafces and applying two or more coats of 100% Premium acrylic emulsion paint in camouflage pattern having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 28 | M&L for broken stone hardcore of gauge exc 63 mm but n.exc 100 mm, deposisted, spread and levelled in layers n.exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed. |
| 29 | M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base of floor/paving/ hardstanding complete all as specified and directed. |
| 30 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. |
| 31 | M&L for colour Glazed ceramic tiles 450X 300X 7mm thick on vertical surface such as dados, skirting , riser to steps etc set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick backing coat in cement mortor (1;4) complete all as specified and as directed. |
| 32 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 33 | M&L for providing, cement concrete 1:2:4 (12.50 mm graded stone aggregate) type B0 in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 34 | S&F for solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 35 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed. |
| 36 | S&F for 125mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 37 | S&F for 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 38 | S&F for 125 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 39 | S&F for Grating doom stainless steel 100mm dia complete all as specified and directed. |
| 40 | S&F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 41 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 42 | S&F for 75mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 43 | S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 44 | S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 45 | S&F for vitreous China wash down closet pan and trap EWC type, white, with plastic seat cover including connection to drain(or outgoing pipes ) and to flushing pipe,antisyphonage pipe ,fixing bolt etc and making good damaged portion complete all as specified and directed. |
| 46 | S&F for Vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete (excluding flushing cistern and flush pipe ) finishing with PCC gap between surface and new WC complete all as specified and directed. |
| 47 | S&F for health faucets (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed. |
| 48 | S&F for 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 49 | S&F for 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 50 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting n.exc 10 cm girth complete all as specified and directed. |
| 51 | Supplying and laying outer dia of pipe 20MM of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. |
| 52 | Supplying and laying outer dia of pipe 25MM of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed. |
| 53 | S&F for 15 mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 54 | S&F for 15 mm bore Stop valves, fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 55 | S&F for 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 56 | S&F for Aluminium anodised Tubular towel rail, 20mm dia, D type, 60 cm long between flanges including brackets complete all as specified and directed. |
| 57 | S&F for Vitreous Cliina counter wash basin, white, flat back, size 550x400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed. |
| 58 | S&F for 15 mm bore Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 59 | S&F for bevelled edge mirror of selected quality glass mounted on 6mm thick ac building board or commercial ply wood and fixed to stainless steel 150mm long spacer/wooden plugs with chromium platated brass screw and cup washers complete all as specified and directed. |
| 60 | S&F for PVC collapsible waste pipe (31/32 x 800) mm all as pe Cat No.3272 of Make Prayag or equivalent model of Make Polytuff/Shakti complete all as specified and directed. |
| 61 | M&L for 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, including ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed complete all as specified and directed. |
| 62 | S&F for ball valves high pressure of PTMT (Minimum weight 210 gms) with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, 20 mm bore and fixed complete all as specified and directed. |
| 63 | S&F for RCC NP3 150 mm dia drain pipes laid in trenches and jointed as specified, including packing under and haunching with cement concrete type C2 1:3:6 complete all as specified and directed. |
| 64 | S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 65 | S&F for powder coated aluminium window and ventilator fixed type half glaxed and half gauged with and including hardware fitings glazing wire gauge rubber packing, aluminium beading etc complete all as specified and directed. Frame 44.5mm x 44.5mm x 1.80mm thick MIddle rail 44.5 x44.5mm x 1.80mm thick glazing 5mm thick forsted glass fixed with rubber gasket and aluminium bedding wire gauge stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1:4mm fixed with aluminium beading, |
| 66 | M&L for 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 67 | S&F for stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed. |
| 68 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite witrh Screed bed or beddinglayer of mortar 15 mm thick for laying floor finishes complete all as specified and directed. |
| 69 | M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate 75mm thick concrete as in sub base of paving complete all as specified and directed. |
| 70 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS-15658-2006 of 60 mm thickness M-40 grade complete all as specified and directed. |
| 71 | M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed. |
| 72 | M&L for PCC 1:3:6 type C2 an in foundation of manholes complete all as specified and directed. |
| 73 | M&L for PCC 1:3:6 type C2 as in bed to drain pipes incl packing under and hunching against the sides of pipes after they are laid and tested for 150mm bore complete all as specified and directed. |
| 74 | M&L for PCC 1:2:4 type B1 as in coping, surface channels, benching, etc of manholes finished fair and even complete all as specified and directed. |
| 75 | M&L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in cement mortar 1:4 including formwork complete all as specified and directed. |
| 76 | Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc complete all as specified and directed. |
| 77 | M&L for MS work such as rungs, handles to manholes, etc complete all as specified and directed. |
| 78 | M&L for water proofing treatment to RCC roof with 3mm thick weight not less than 3.6 Kg/sqm, APP modified polymeric membrane non-woven polyester reinforcement to be laid by torch application method, On the dried surface applying one coat of approved bituminous primer @ 0.25 Ltrs/sqm wifth torch application, laid with over laps of 100mm joints of traverse direction and 75mm at longitudinal direction duly thermofused by flame torch all as specified in application manual of the company with a coat of aluminium paint over the APP modified membrane @ 0.11 Kg/Sqm to bbe applied on surface complete all as specified and directed. |
| 79 | S&F for 30 mm thick Iind class hardwood Flush door shutter, solid core construction with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 80 | M&L for 105 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete all as specified and directed. |
| 81 | M&L for Preparation of new wood surfaces of any description over 10cm width or girth and priming with pink primer and painting with synthetic enamel painting two coats complete all as specified and directed. |
| 82 | S&F for 300 mm long Aluminium alloy anodised sliding door bolts with hasp and staple(bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium and fixed complete all as specified and directed. |
| 83 | M&L for concealed Point wiring with 1.5 Sq mm copper conductor single core ,FRLS PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC rigid conduit and its accessories of suitable size, high grade ISI marked concealed in walls /roof and MS pressed steel terminal boxes of 1.22 mm thick of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement incl provision of 3 mm thick bakelite hylem sheet for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for : |
| 84 | One light point controlled by one way switch 5/6 amps. |
| 85 | One ceiling fan/Exhaut fan/Wall Fan point controlled by one way switch 5/6 amps. |
| 86 | S&F for switch piano flush type 5/6 amps single pole one way complete all as specified and directed. |
| 87 | S&F for ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed. |
| 88 | S&F for IP 20, class I, LED light 1X18/20 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and complete all as specified and directed. Make : Crompton Cat Part No TCS-109-20-65-SL-DP-NWH. |
| 89 | S&F for Bulk head luminaire suitable for 10 Watt LED (or nearest next higher wattage) light IP66 grade, luminaire efficiency not less than 120 lumens/watts with and including 10 watt LED (or nearest next higher wattage) lamp and connecting up with and including PVC insulated 3 core of size 0.75 Sqmm copper conductor from ceiling rose to terminal block of light fitting complete all as specified and directed. Make : Crompton Cat Part No TIS-303-10-57-SL-DP-NWH. |
| 90 | S&F for Exhaust fan, 230 V, 300 mm sweep,metal body and heavy duty with all accessories internally prewired and connecting up with and complete all as specified and directed. |
| 91 | S&F for MCB distribution boards (DBs) with sheet metal enclosure, double door, IP 43 protection, 240 Volts, 4 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and directed. |
| 92 | S&F for MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one complete all as specified and directed. |
| 93 | S&F MCB, Single pole, 6 to 32 amps, 240 volts, ‘C’ curve, 10 KA all complete with and including taking down old unsv one as specified and as directed. |
| 94 | Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 10 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and directed. Note: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A'). |
| 95 | Supply and laying sub class B bricks of size 23cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and directed. |
| 96 | M&L for 32 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and directed. |
| 97 | M&L for earthing complete with galvanized steel plate electrodes of size 600x600x6.3mm thick burried directly in ground with earth pit not less than 2.25 meter deep below normal ground level with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised wire 4.00 mm earth lead by means of nuts, bolts, checknuts and washers including 15 mm bore galvanized iron pipe, medium grade for protection of earth lead upto the length of 7.5 meter towards test terminal and 20 mm bore galvanized iron pipe, medium grade for watering, and providing of charcoal and common salt in alternate layers, includig necessary earth work in any type of soil and including PCC pit in PCC 1:2:4 with provision of wire mesh and funnel, complete all as shown in electrical plate No 5 of SSR Part- I including testing on completion complete all as specified and directed. |
| 98 | Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm complete all as specified and directed. |
| 99 | Supply and lay pipe galvanized, “Medium class”, including fittings 20 mm complete all as specified and directed. |
| 100 | S&F for Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories complete all as specified and directed. |
| 101 | S&F for Gun metal ,globe Gate Valves with iron wheel head of 20 mm dia bore complete with all accessories complete all as specified and directed. |
| 102 | M&L for cutting of existing Cast iron/ GI pipe of 80mm size for insertion of new tee & Branch complete all as specified and directed. Material and labour laying well burnt old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender