Tender For Addition / Alteration To Building No. P-1/Ab And Bldg No. P-261 At Si Lines Under Ge Bhopal
Tender Value
19.24 Lakhs
Estimated cost
Bid Submission
21 Oct 2026
5 days left
EMD
38500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition / Alteration To Building No. P-1/Ab And Bldg No. P-261 At Si Lines Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below.(ii) Amount of Schedule of credit shall be deducted offline |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and directed. |
| 3 | S&F tubes 15mm dia, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old GI/PVC pipes etc complete all as specified and directed. |
| 4 | M& L for cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 5 | M&L glazed coloured ceramic tiles in vertical surfaces with matching highlighter 450x300x7-8mm thick fixed over 10mm thick cement mortar rendering in CM 1:4 jointed in neat cement slurry and pointed in white or coloured cement to match tiles with complete all as specified and directed. |
| 6 | M&L for light shade vitrified ceramic tiles (of approved shade and design) area of each tiles not exc 0.38 sqm, as in floors and skirtng, etc. set and jointed in neat cement slurry and pointed with white cement including 15mm thick screed bed in CM (1:6) including dismantling of old tiling fixed in any mortar complete all as specified and directed. |
| 7 | M&L for heavy duty parking /outdoor tiles minimum 10mm thick (square/rectangular) area of each tiles not exc 0.11 sqm, in floors and skirting set and jointed in neat cement slurry and fixed over 15mm thick screed bed in CM 1:4 including demolition of old tiles all as specified and directed. |
| 8 | M&L 40 mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregated) as in sub floors, sub bases, floors and paving, complete all as specified and directed. |
| 9 | M&L for making good under cills and over archs,lintels and bressummers including all pinning where necessary in cement mortar in 1:6 all as specified and directed. |
| 10 | S&F galvanised cold rolled steel section framework snap grid of size 600x600 mm for false ceiling and PVC coated calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid including 2-3mm GI haging wire (upto 1200mm length) fixed to ceiling by drilling and fixing with hold fasteners of suitable size and dismantling of exiting false ceiling complete all as specified and directed. |
| 11 | M&L granite 18-20 mm thick (of approved colour and texture) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade or granite, rounding of edges including dismantling of old stone slab complete all as specified and directed. |
| 12 | S&F in reapir 18mm plywood grade BWR, type BB fixed with screws to timber frame work including dismantling old boarding any description fixed in any position with nails complete all as specified and directed. |
| 13 | S&F in reapir 0.9mm thick decorative laminate type 1, glossy surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed. |
| 14 | S&F 100 mm stainless steel handle, cast type, polished bright complete all as specified and directed. |
| 15 | S&F in repair to cabinet hinges soft close stainless steel 8 crank complete all as specified and directed. |
| 16 | S&F 500mm long stainless steel telescopic channel fixed in sliding drawer with necessary screws complete all as specified and directed. |
| 17 | S&F kitchen baskets with 100 % stainless steel, non - magnatic, multilayer chrome plated, argon welded, double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 100mm complete all as specified and directed. |
| 18 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 150mm complete all as specified and directed. |
| 19 | S & F kitchen baskets with 100 % stainless steel ,non - magnatic, multilayer chrome plated , argon welded ,double sealed ball bearing mechanism kitchen capable of holding plates ,cup ,saucers,bowls and dongas with 500 mm car case depth of 558mm and height 200mm complete all as specified and directed. |
| 20 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frame and shutters for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285 including necessary locks handle, rubber gasket for glass/ wire mesh fixing, complete all as specified and directed. |
| 21 | Supply and fix 4.0mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 22 | S&F of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 23 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65X125 mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 24 | S&F 30mm to Factory made single extruded WPC (WoodPolymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 25 | All as item No 23.00 here-in before but 30mm thick gauzed/ glazed shutter complete all as directed.Note: Wiremesh wiil be measured and paid separately. |
| 26 | S&F 100mm butt hinges, heavy weight, cold rolled stainless steel and fixed, complete all as specified and directed. |
| 27 | S&F 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed. |
| 28 | S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 29 | S&F aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 250mm long, plate type, complete all as specified and directed. |
| 30 | S&F in repair 25mm stainless steel curtain rod heavy including taking down old rods with fittings complete all as specified and directed. |
| 31 | S&F decorative type stainless steel curtain rod bracket/ holder with designer cap of suitable for 25mm dia rod, complete all as specified and directed. |
| 32 | S&F chromium plated, grating doom 100 mm dia with waste hole, all as specified and directed. |
| 33 | S&F in repairs fancy type long body CP bib taps 15 mm dia (having weight not less than 0.575 kg as per SSR Part-I clause 18.15.1 ) cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule, complete all as specified. |
| 34 | S&F in repairs 15 mm angle valve stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 35 | S&F in repairs 15 mm fancy type swan neck taps cast copper alloy, with capstain head .chromium plated screw down high pressure, with long shanks and fly-nuts screwed for iron pipes and fixed complete including necessary small GI fittings complete all as specified and directed. |
| 36 | S&F in repairs CP 15mm wall mounted sink mixture for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 37 | S&F in repair of PVC waste pipe 900mm long, 32mm dia size, complete all as specified and directed. |
| 38 | S&F in repair to PVC connections 15mm size with PTMT nuts of length 600mm, complete as in repairs complete all as specified and directed. |
| 39 | M&L PVC (SWR) 75mm bore, floor trap plain with grating including jointing with solvent cement complete all as specified and direcetd. |
| 40 | S&F PVC(SWR) pipes 110 mm bore single socketed in any length with rubber rings joints laid in floor or wall including taking down old pipes, complete all as specified and directed. |
| 41 | S&F PVC(SWR) pipes 75 mm bore single socketed in any length with rubber rings joints laid in floor or wall including taking down old pipes, complete all as specified and directed. |
| 42 | S&F 110 mm bore PVC (SWR) bend, jointed with solvent cement complete all as specified and directed. |
| 43 | S&F in repair 75mm PVC (SWR) bend, jointed with solvent cement complete all as specified and directed. |
| 44 | S&F in repair 75mm PVC (SWR) junction single (single 'T') equal or unequal, jointed with solvent cement complete all as specified and directed. |
| 45 | S&F in repairs stainless steel sink, 1.00mm thick for kitchen, with plug, washers and waste coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 530mm x 450mm x 230mm fixed complete all as specified and directed. |
| 46 | M&L for rendering 15 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4) , finished even and smooth without using extra cement and with WPC as per manufacturer's instruction, including taking down of of existing old plaster complete all as specfified and directed. Note:- WPC shall be measured and paid seperately. |
| 47 | M&L for 10 mm thick rendering in cement plaster 1:6 on other than fair face of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old plaster and raking out joints complete all as specified and directed. |
| 48 | Supply only integral water proofing compound complete all as specified and directed. |
| 49 | M&L Preparation of new plastered surface and applying two coats of oil emulsion distemper including a coat of white cement based putty all as specified and directed. |
| 50 | M&L Preparation of new plastered surface and applying two coat of exterior weather proof water base emulsion paint white/coloured over and including one coat of white cement based putty all as specified and directed. |
| 51 | M&L complete removal of old decorated surface of wall and applying two coat of exterior weather proof water base emulsion paint over and including one coat of white cement based putty all as specified and directed. |
| 52 | M&L complete removal of old decorated surface of wall and applying two coat of oil emulsion distemper including over one coat of white cement based putty complete all as specified and directed. |
| 53 | M&L fly ash brick work with modular 'B' bricks in cm 1:6 using modular bricks straight or curved on plan to any radius including demolition all as specified and directed. |
| 54 | M&L preparation of old painted surfaces of steel and iron surface of any description and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 55 | M&L PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, sub base etc complete all as specified and directed. |
| 56 | S&F Providing and laying 60mm thick rubber moulded factory made chamfered edge cement concrete glossy finish paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer and filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 57 | M&L for providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) in copings, including necessary form work complete all as specified and directed. |
| 58 | Taking down shutters and refixing in same opening of any descripition exc 1 sqm and nexc 2sqm each, all as specified and directed. |
| 59 | Supply & fixing of framed work such as grills, gratings, cooler stands etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 including necessary fixing to walls as directed. |
| 60 | S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 incl dismantling of old structural steel all as specified and directed. |
| 61 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick (precoated AZ 150 micron) of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer including dismantling of old sheets fixed at any location complete all as specified and directed. |
| 62 | All as per item No 60.00 here-in before but plain as in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) including dismantling of old sheets fixed at any location complete all as specified and directed. |
| 63 | M&L for preparation of new steel surface of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 64 | M&L for Rendering 15 mm thick on fair face of brick work or concrete surfaces or stone masonry surfaces or surface in CM 1:4 finished even and smooth without using extra cement complete all as specified. |
| 65 | Taking down carefully copper/aluminium point wiring concealed/ casing caping (light, fan, socket or power) including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings, call bell and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed. |
| 66 | Dismantling/taking down of unserviceable old existing service /submain wire of any size all as specified and directed. |
| 67 | Dismantling/taking down of unserviceable distribution boards with MCBs all as specified and directed. |
| 68 | Taking down carefully serviceable/unserviceable exhaust/ceiling fans of any size from its position, and deposited to E/M office store yard all as specified and directed. |
| 69 | Taking down and refixing of LED tube light fitting bright 18/20 Watt slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. Please Enable Macros to View BoQ information |
| 70 | Taking down and refixing of LED tube light fitting bright 18/20 Watt slim elegant design. and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 21, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 23, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender