Tender For Special Repairs Of Retaining Walls At Nts(K) Kalamassery
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
6 days left
EMD
68700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs Of Retaining Walls At Nts(K) Kalamassery
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work/stone boulder masonry built in cement mortar including all quoins, pillars etc incl removal.complete all as spd and as directed by Engineer in Charge |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in hard dense soil complete all as specified. |
| 3 | As per item No:2 above but Exc 1.5M depth and N.exc 3.0M depth complete all as specified and as directed by Engineer in Charge |
| 4 | Material and Labour for PCC 1:4:8 Type D2 (40mm graded aggregate) in foundations, filling and mass concrete all as specified. |
| 5 | Material and Labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 6 | Material and Labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 but except stone complete all as specified and directed. |
| 7 | Material and Labour for Hand packing (any thickness) at back of walls over arches etc with broken stone or boulders and raising(or lowering) to the required level complete all as specified and directed. |
| 8 | Returning, Filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm, hard/dense soil all as specified and directed. |
| 9 | Removing excavated soil not exceeding 50 m and depositing where directed at a level not exc. 1.5 M above the starting point. |
| 10 | Keyed pointing in Cement Mortar 1:4, to Random or Polygonal rubble, uncoursed or brought upto course all as specified and directed. |
| 11 | Extra over stone walling for hammer dressing to Granite or Trap stone with maximum depression on face from straight edge held against the dressed surface n exc. 40mm, to face stones and dressing of face beds and joints, as specified, of Random Rubble walling, uncoursed or brought all as specified and directed. |
| 12 | Demolition of Concrete of any description and in any position not otherwisespecifically provided for complete all as specified and directed |
| 13 | Material and Labour for PCC type B1 1:2:4 (20mmgraded aggregate as in lintels upto 1.5m clear span, cells, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as specified and directed. |
| 14 | Material and Labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width and setting in mortar,complete Type C 1 1:3:6 set in CM 1:6 (20mm graded aggregate) complete all as spd and directed by Engineer in Charge |
| 15 | Material and Labour for 15mm thick rendering on brick work or concrete surfaces in CM 1:4 finished even and Fair without using extra cement |
| 16 | Material and Labour for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. complete all as spd and directed by Engineer in Charge |
| 17 | Supply and fix High density polyethylene pipes for weap holes 50mm dia (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender