Tender For Provn Of Certain B/R And E/M Works Services At Bldg No P-25 At Mns Offrs Mess At Chaf Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
88688
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Certain B/R And E/M Works Services At Bldg No P-25 At Mns Offrs Mess At Chaf Banglaore
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | Tender Corrigendum | Other | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for key scrubbing down with water etc., complete all as specified and as directed . |
| 2 | Demolition of brick or stone/ boulders masonary, built in cement mortar complete all as specified and as directed . ( iem 2 of 3(a)(i) + item 15 of 6(d) ) |
| 3 | Demolition of cement concrete in ground floor and paving not exc 15 cm thick below or above GL complete all as specified and as directed . ( iem 3 of 3(a)(i) + item 1 of 6(d) ) |
| 4 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not balking) removing serviceable tiles to store complete all as specified and as directed . |
| 5 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed . |
| 6 | Demolition of reinforced cement concrete of any description (reinforcement cut as reqd to facilitate demolition) complete all as specified and as directed . ( iem 6 of 3(a)(i) + item 12 of 6(d) ) |
| 7 | Dismantling plain or corrugated steel sheeting any guage, thickness including roof covering etc., complete all as specified and as directed . |
| 8 | Dismantling structural steel work incl door gates but excluding framed work complete all as specified and as directed . |
| 9 | Dismantling wrought iron and mild steel work iof any description complete all as specified and as directed . |
| 10 | Dismantling timber scantling 40 sqcm and over in section, in any position as in framed work such as truss, post, purlins and rafters etc., complete all as specified and as directed . |
| 11 | Taking down chowkhat or frames with shutters exc 1.5 sqm but not exc 4 sqm each (w/o taking of shutters from the frame) complete all as specified and as directed . |
| 12 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc 1.50 sqm each complete all as specified and as directed . |
| 13 | Taking down shutter of any description exc 1 sqm but not exc 2 sqm and re-fixing in the same opening incl easing etc., complete all as specified and as directed . |
| 14 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exc 10 sqm on plan and not exc 1.5m in depth and getting out hard/ dense soil complete all as specified and as directed . ( iem 14 of 3(a)(i) + item 2 of 6(d) ) |
| 15 | Material and labour for PCC 1:4:8 Type D-2 (Using 40mm graded stone aggregate) in sub base of floor, foundations, filling and mass concrete complete all as specified and as directed . ( iem 15 of 3(a)(i) + item 6 of 6(d) ) |
| 16 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed . ( iem 16 of 3(a)(i) + item 3 of 6(d) + item 51 of 3(b) (ii)) |
| 17 | Removing excavated soils exc 1.5 Km but not exc 5 km and depositing where directed complete all as specified and as directed . |
| 18 | Material and labour for 40mm thick PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in sub base/ levelling course/ floor finishes etc., complete all as specified and as directed . |
| 19 | Material and labour for 75mm thick PCC 1:3:6 type C1 (Using 20mm graded stone aggregate) as in plinth protection etc., complete all as specified and as directed . |
| 20 | Material and labour for 100mm thick PCC 1:2:4 type C-1 (Using 20mm graded stone aggregate) as in floor finishes /laid in alternate panes complete all as specified and as directed . |
| 21 | Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including cement screed bed 15mm thick in cement mortar 1:6 base including rubbing and mirror polishing, and half nose moulding (bull nosing) etc., complete all as specified and as directed . |
| 22 | All as per item No.21 jhere-in-before but pre-polished kota stone as in vertical surfaces such as skirting and risers over and including 10mm thick plaster in cement mortar 1:4 on brick work or concrete surfaces complete all as specified and as directed . |
| 23 | Material and labour for powder coated aluminium windows of three tracks outer frame top, side sections, bottom frame (track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh (total 3 nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40X18X1.5mm inculding glass 4mm thick and aluminium wire cloth, 0.45mm nominal dia wire and average width of aperture 1.40mm complete all as specified and as directed . |
| 24 | Supply and fix for powder coated aluminium frame work for grills Deco-grill Model DG-104 (10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc., complete all as specified and as directed . |
| 25 | Material and labour for 18 to 19mm thick prelaminated partical board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, and fixed with screw and continuous (piano) hinges, 125mm long hasp and staple and and prepared kitchen cabinate with shutter (and one or two self as per site requirement forstorage) and hanging on wall and also fixed to timber frame work where required complete all as specified and as directed . |
| 26 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and as directed .Note: All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufactures catalouge for the corresponding aluminum sections/ fittings. |
| 27 | Supply and fix for anodised aluminium door shutters (any type, normal or sliding), aluminium section powder coating (minimum thickness of powder coating 50 micron) weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and as directed . |
| 28 | Supply and fix for 9mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and as directed . |
| 29 | Supply and fix for 5.5mm thick sheet glass, ordinary quality, fixied with necessary glazing clips, in squares exc 0.5 sqm in each pane complete all as specified and as directed . |
| 30 | Material and labour for 8 to 9mm thick prepainted gypsum building boards of size 595x595mm PVC laminated at back side of board insulation and accoustic purpose flat in ceiling fixed or laid/ including powder coated GI snap grid of size 605x605mm frame work using 36.50x23.50x1.5mm main Tee, 23.50x23.50x1.5mm cross Tee and 25x25x1.5mm angles for false ceiling with screws fixed to false ceiling including hangers 4mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed .Note: The rate shall be inclusive of scaffolding and necessary arrangements. |
| 31 | Material and labour for non skid ceramic coloured joint free tiles 7 to 8mm thick (square/ rectangular), area of each tiles exc 0.06 sqm but not exc 0.11 sqm, in floor etc., set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar 1:6 laying floor finish complete all as specified and as directed . |
| 32 | Material and labour for glazed ceramic coloured tiles in vertical surfaces 300x450x7mm /300x600x7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10mm thick in CM 1:4 complete all as specified and as directed . |
| 33 | Material and labour for precast cement concrete block masonry with soild blocks, type C1 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed . ( iem 33 of 3(a)(i) + item 17 of 6(d) ) |
| 34 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed . |
| 35 | Material and labour for rendering 10mm thick in cement mortar 1:6 and 5mm thick in cement mortar 1:4 in two layers on fair faces of brick work or concrete surfaces with water proofing compound @ 200 ml per 50kg of cement or as per manufacturer's instruction etc., finished even and smooth without using extra cement complete all as specified and as directed .Note: WPC shall be measured and paid separately. |
| 36 | Material and labour for rendering 5mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed . |
| 37 | Material and labour for providing reinforced cement concrete 1:2:4 type B1 (Using 20mm graded stone aggregate) as in cooking platform slab supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified and as directed . |
| 38 | Supply and fix for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed . ( iem 38 of 3(a)(i) + item 14 of 6(d) ) |
| 39 | Material and labour for granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and table top for fixing wash basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite shade including screed bed or bedding layer of cement mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and as directed . |
| 40 | Supply and fix for steel window/ ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and with glazing bars with dovetailed or welded complete all as specified and as directed . |
| 41 | Supply and fix for steel window/ ventilator with side hung shutter including projecting type hinges with steel handles and steel peg stay and without glazing bars with dovetailed or welded complete all as specified and as directed . |
| 42 | Supply and fix for pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed . |
| 43 | Material and labour for PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as filled in pressed steel foor frames etc., complete all as specified and as directed . |
| 44 | Supply and fix for mild steel work as in band, strap, hold fast, clamp, cleat, hook, hinges base tie for floor, frame, support or stay for rain water pipe etc., and other similar items conforming to Fe-290 Gde-E-165 complete all as specified and as directed . |
| 45 | Material and labour for PCC 1:3:6 type C-1 (Using 20mm graded stone aggregate) as in hold fast block including necessary form work etc., complete all as specified and as directed . |
| 46 | Supply and fix for 35mm thick factory made second class hard wood plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both face. The size of rail and style as per IS 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed . |
| 47 | Supply and fix for 4mm thick sheet glass ordinary quality and fixed with aluminium beading in square not exc 0.50 sqm in each pane complete all as specified and as directed . |
| 48 | Supply and fix for 4mm thick figured glass, pin head type and fixed with aluminium beading in squares not exc 0.5 sqm in each pane complete all as specified and as directed . |
| 49 | Supply and fix for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc., complete all as specified and as directed . |
| 50 | Supply and fix for butt hinges 100mm medium weight cold rolled mild steel complete all as specified and as directed . |
| 51 | Supply and fix for mild steel sliding door bolt plate type stove enamelled black of length 300mm with bright bolt not less than 12mm dia with and including a minimum of 6 Nos bolts and nuts 4 on bolt plate and 2 on staple plate and fixed complete all as specified and as directed . |
| 52 | Supply and fix for 200mm long of barrel tower bolts stove enamelled black with bright bolt complete all as specified and as directed . |
| 53 | Supply and fix for 150mm mild steel pressed handles oval type stove enamelled black complete all as specified and as directed . |
| 54 | Supply and fix for factory made solid PVC door frame (chowkhat) of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS wire tube supplied and fixed in opening complete all as specified and as directed . |
| 55 | Supply and fix for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site complete all as specified and as directed . |
| 56 | Supply and fix for 100mm long extruded aluminium alloy anodised butt hinges with galvanized mild steel hinge pin type C-22 complete all as specified and as directed . |
| 57 | Supply and fix for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed . |
| 58 | Supply and fix for 150mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed . |
| 59 | Supply and fix for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed . |
| 60 | Supply and fix for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as in ridge of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed . |
| 61 | Excavation in post holes each not exc 0.50 cum in any type of soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50m and making good surface complete all as specified and as directed . |
| 62 | Material and labour for cement concrete type C2 1:3:6 (Using 40mm graded stone aggregate) in foundations, filing and mass concrete complete all as specified and as directed . |
| 63 | Supply and fix for roof trusses (framed), trussed, purlins, crane gantries, rails and fastnings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., Fe-410 (gde E-250) complete all as specified and as directed . |
| 64 | Supply and fix for plates (plain or chequered) channels, distance pieces, cleats etc., square cut or notched including riveted, bolted or welded attachment complete all as specified and as directed . |
| 65 | Supply and fix for framed work such as grills, shouldered and/or riveted, or forged into spikes; framed, guard bars; barred iron doors; ladders; framed balusters; walk,ways; railings; framework of water tanks and similar work, conforming to Fe.290.Gde-E-165 complete all as specified and as directed . |
| 66 | Material and labour for providing cement concrete type B-0 1:2:4 (Using 12.5mm graded stone aggregate) as in roof kerbs, padding or mud stops, rounded or chamfered on edges complete all as specified and as directed . |
| 67 | Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed . |
| 68 | Material and labour for rendering 10mm thick in cement mortar 1:3 on roof padding finished even and fair with approved water proofing compound @ 200ml per 50kg of cement or as per manufacturer's instruction complete all as specified and as directed .Note: WPC shall be measured and paid separately as supply only under relevent item |
| 69 | Supply only liquid water proofing compound complete all as specified and as directed . |
| 70 | Material and labour for water proofing treatment on horizontal and vertical surfaces with providing and laying/ fixing TPO (Thermoplastic Polyolefin) membrane incl cleaning the surface and laying of 200 GSM Geo textile and cover up with TPO RF 1.2mm thermoplastic membrane on roof & upto 300mm of parapets and crumple joint including junction of roof and parapet, welding the seam joints with hot air gun/ machine and terminate the corners with extra protection to bear the high wind pressure. The TPO should be thoughroly tightened with the lower structure using mechanical fastening properly to avoid the corners and seam joint failure complete all as specified and as directed . |
| 71 | Supply and fix for rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) 500 ltrs capacity hoisted and fixed in position including dismantling of existing water tank and disconnecting pipeline connection complete all as specified and as directed . |
| 72 | Supply and fix for rotational moulded polyethylene water storage tank (cylindrical or vertical with closed top) 2000 ltrs capacity hoisted and fixed in position including dismantling of existing water tank and disconnecting pipeline connection complete all as specified and as directed . |
| 73 | Supply and fix in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for 20mm dia iron pipe and fixed (minimum wieght 15mm-142gms/20mm 210gms/25mm 455gms/40mm 690gms) complete all as specified and as directed . |
| 74 | Supply and fix for plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed . |
| 75 | Supply and fix in repairs plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device suitable as well as for anglo indian WC complete all as specified and as directed . |
| 76 | Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), EWC white with 'P' or 'S' trap, including provision of fixing bolts and connecting upto drain and flushing pipe etc., complete all as specified and as directed . |
| 77 | Supply and fix in repairs vitreous china squatt pattern, orissa pattern size 580x440mm white, with integral foot rests and 'P' or 'S' trap, white, including provision of fixing bolts and connecting upto drain and flushing pipe etc., complete all as specified and as directed . |
| 78 | Supply and fix in repairs PVC flushing cistern 10 ltrs capacity syphonic action type with flush pipe low level, with inlet ball valve, float chain, pull and brackets, including making necessary connections to water supply pipe line and jointing to WC etc., complete all as specified and as directed . |
| 79 | Supply and fix in repair chromium plated brass 15mm dia health faucet with 8mm dia, 1.2m long flexible tube with wall hook complete necessary fixing arrangements etc., complete all as specified and as directed . |
| 80 | Supply and fix in repairs vitreous china wash basin, white flat back, size 550x400mm including cutting for and pinning in ends of brackets or ereesing stand complete all as specified and as directed . |
| 81 | Supply and fix in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm between flanges complete all as specified and as directed . |
| 82 | Supply and fix in repairs 15mm PVC connection 600mm long between ends with PTMT nut and washer complete all as specified and as directed . |
| 83 | Supply and fix in repairs toilet paper holder of stainless steel fixed by CP brass screws in wall complete all as specified and as directed . |
| 84 | Supply and fix for 110mm PVC (SWR) WC connector bent type for WC complete all as specified and as directed . |
| 85 | Supply and fix in repairs 15mm bore fancy type, chromium plated stop valves/ angle cock screwed down high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed . |
| 86 | Supply and fix in repairs 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed . |
| 87 | Supply and fix in repairs CP two way stop cock with all accessories complete all as specified and as directed . |
| 88 | Supply and fix in repairs 15mm bore fancy type CP bib taps cast copper alloy with crutch or butterfly nuts, handle, screwed down for iron pipe complete all as specified and as directed . |
| 89 | Supply and fix in repairs gratings doom, 100mm dia of PTMT (minimum weight 25 gms) complete all as specified and as directed . |
| 90 | Supply and fix in reparis 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed . |
| 91 | Taking up or down 15mm dia GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed . |
| 92 | Taking up or down 20mm dia GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed . |
| 93 | Taking up or down 25mm dia GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed . |
| 94 | Supply and fix for 15mm bore GI tubing medium grade galvanished with all fittings and fixed complete to wall or floors etc., complete all as specified and as directed . |
| 95 | Supply and fix for 20mm bore GI tubing medium grade galvanished with all fittings and fixed complete to wall or floors etc., complete all as specified and as directed . |
| 96 | Supply and fix for 25mm bore GI tubing medium grade galvanished with all fittings and fixed complete to wall or floors etc., complete all as specified and as directed . |
| 97 | Supply and fix in repairs 20mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe and fixed complete all as specified and as directed . |
| 98 | Supply and fix in repair 25mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe and fixed complete all as specified and as directed . Please Enable Macros to View BoQ information |
| 99 | Supply and fix in repair 25mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe and fixed complete all as specified and as directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender