Tender For Repair/ Maintenance Of Wooden Furniture For Offrs Md Accn Under Ge Ranchi
Tender Value
30 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance Of Wooden Furniture For Offrs Md Accn Under Ge Ranchi
BOQ
| Sl. No. | Item Description |
| 1 | Bed Hard (FD/E6/MAP/08(R) ) M&L for Removing of unserviceable/broken parts of Bed Hard MAP without damaging of other parts of Bed Hard, supply and fixing new parts as shown on drg and specified. Drg No FD/E6/MAP/08(R) |
| 2 | Material and labour for Repair and painting to frame of bed hard, repair & weld the frame by electric welding wherever required then paint with synthetic enamel black paint over a coat of primer after preparation of surface with rubbing with emery paper as specified and directed by Engineer-in-Charge. Drg No FD/E6/MAP/08(R) |
| 3 | Supply and fixing in replacement of 12mm plywood BWR Gde as per IS:303 of size 1980 x 900mm of Make:- Archidply/Greenply/Centuryply/BTSP Gold with necessary steel screw to top of Bed Hard MAP and all as shown on drg. Drg No FD/E6/MAP/08(R) |
| 4 | Supply and fixing in replacement of Head board of Bed Hard MAP made of 18mm thick prelaminated MDF Board both side laminated exterior gde, Type-I with 0.8mm thick PVC edge bending Tape of make:- REHAU/Fixin pasting with probond synthetic adhesive/ glue alround as per shown on drg and directed by Engr-in-charge. (Make of MDF Board:- Ashish/Action Tesa/Century/ Greenply) Drg No FD/E6/MAP/08(R) |
| 5 | All as per Srl. Item No:-1.03 here-in-before but foot board of Bed Hard. (FD/E6/MAP/08(R) |
| 6 | Supply and fixing in replacement of PVC shoes to legs of Bed ply Top all as per shown on drg and directed by Engr-in-Charge. Drg No FD/E6/MAP/08(R) |
| 7 | CHAIR DINNING MAP (FD/MAP-II/04) Removing of unserviceable/broken parts without damaging of other parts of chair dining cushioned and supply and fixing following new parts made out of 1st class hard wood teak/shisham as shown on drg and specified. |
| 8 | 12mm thick MR Gde Plywood seat with cushion of size 450mm x 450mm with Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 350/- per RM). (FD/MAP-II/04) |
| 9 | Front leg of size 450x50x35mm. (FD/MAP-II/04) |
| 10 | Rear leg of size 950x50x35mm. (FD/MAP-II/04) |
| 11 | Back Vertical stripps of size 550 x 30 x15mm.(FD/MAP-II/04) |
| 12 | Back rest of size 450x45x25mm.(FD/MAP-II/04) |
| 13 | Stiffener of size 25x20mm (Side & Central one).(FD/MAP-II/04) |
| 14 | Side and Front rails of seat of size 450x65x25mm. (FD/MAP-II/04) |
| 15 | Back Rail of seat of size 450x90x25mm. (FD/MAP-II/04) |
| 16 | Supply and fixing with machine screw of triangular bracket of size 50x50x25mm of 1st class hard wood teak/shisham between legs and rails of Chair dining cushioned.(FD/MAP-II/04) |
| 17 | Material and labour for French polishing to chair dining cushion after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface upto glossy finish. |
| 18 | Supply & Fix nylon buffers with machine screw to legs of chair dining cushion complete all as directed by Engineer-in-Charge. |
| 19 | Sofa Set 5/4 Seater (FD-258/281/373) M&L for removing of unserviceable/broken parts without damaging of other parts of Sofa set and supply and fix following new parts made out of 1st class hard wood teak as shown on drg and specified. (Drg No FD-258, 281 & 373) |
| 20 | Supply and fixing in replacement of front/rear leg of 1st class hard wood teak of Sofa set of single seater/3 seater all as specified and shown on drg. Drg No FD-258, 281 & 373 |
| 21 | All as per item No. 3.01 here-in-before but arms. Drg No FD-258, 281 & 373 |
| 22 | All as per item No. 3.02 here-in-before but side rails. Drg No FD-258, 281 & 373 |
| 23 | All as per item No. 3.03 here-in-before but front & back rail of single seater sofa. Drg No FD-258, 281 & 373 |
| 24 | All as per Srl item No 3.04 here-in-before but front/back rail of sofa three seater (long seat). Drg No FD-258, 281 & 373 |
| 25 | Supply & fixing in replacement of 100mm thick flexipuff/U-Foam cushion of 32 density of Make:- Sleepwell/Cor-foam/ Kurl-on/Featherfoam, covered with new tapestory cloth (not less than Rs 400/- per running mtr) complete all as specified and directed by the Engineer-in- charge. Drg No FD-258, 281 & 373 |
| 26 | Material and labour for French polishing to Sofa Set Single seater after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish. Drg No FD-258, 281 & 373 |
| 27 | Material and labour for French polishing to Sofa Set Three seater after removing the old polish from emery paper & with grinder machine , prepare of whole wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface . Then after apply two coat of french polish to the whole wooden surface till glossy finish. Drg No FD-258, 281 & 373 |
| 28 | Teapoy:- (FD-232 & 278) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge. |
| 29 | Supply and fixing in replacement of top of teapoy of size 600x450mm with new top made out of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam / Samrat including 4mm thick teak wood beading alround all as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply. FD-232 & 278 |
| 30 | Supply and fixing in replacement of legs of teapoy with new leg of size 60x30x520mm made of 1st class hard wood teak/shisham of size and shape as shown on drg. FD-232 & 278 |
| 31 | All as per item No 4.02 here-in-before but long batten/rail of size 50x20x600mm & shape as per shown on drg. FD-232 & 278 |
| 32 | All as per item No 4.02 here-in-before but short stiffener/rail of size 50x20x450mm and shape as per showon on drg. FD-232 & 278 |
| 33 | S & F of 1st class hard wood teak/shisham wooden bracket machine cut of size 50 x 50 x 20mm with steel screw between the rail and legs of Teapoy with tightening of all parts of Teapoy. FD-232 & 278 |
| 34 | M&L for applying french polishing with best quality french polish on exposed surfaces to teapoy till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-232 & 278) |
| 35 | Supply & Fix nylon buffers with machine screw to legs of Teapoy complete all as directed by Engineer-in-Charge. FD-232 & 278 |
| 36 | Table Peg (FD- 384/236) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge. |
| 37 | Supply and fixing in replacement of top of table peg with new top of size 450x300mm new top made out of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/ Archidlam / Centurylam/ Samrat including 4mm thick teak wood beading alround all as shown on drg of Table Peg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply) (FD- 384/236) |
| 38 | Supply and fixing in replacement of legs of peg table with new leg of size 50x30x360mm made of 1st class hard wood teak/shisham size & shape as shown on drg. (FD- 384/236) |
| 39 | All as per item No 5.02 here-in-before but long batten/rail of size 40x20x450mm of table peg. (FD- 384/236) |
| 40 | All as per item No 5.02 here-in-before but short rail/stiffener of size 40x20x300mm of table peg. (FD- 384/236) |
| 41 | S & F of 1st class hard wood teak/shisham wooden bracket of size 50 x 50x20mm with steel screw between the rail and legs of Table Peg with tightening of all parts of Table Peg. (FD- 384/236) |
| 42 | M&L for applying french polishing with best quality french polish on exposed surfaces to table peg till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD- 384/236) |
| 43 | Supply & Fix nylon buffers with machine screw to legs of Table peg complete all as directed by Engineer-in-Charge. (FD- 384/236) |
| 44 | Table Centre (FD-274) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 45 | Supply and fixing in replacement of top of table Centre with new top of size 900 x 450mm new top made out of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/ Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround all as shown on drg of Table Centre. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). FD-274 |
| 46 | Supply and fixing in replacement of legs of table centre with new leg of size 60x30x380mm made of 1st class hard wood teak/shisham as specified in drg. FD-274 |
| 47 | All as per Srl. item No. 6.02 here-in-before but long rail of size 50x20x900mm. FD-274 |
| 48 | All as per Srl. item No. 6.02 here-in-before but short rail/stiffener of size 50x20x450mm. FD-274 |
| 49 | Supply & Fixing of 1st class hard wood teak/shisham wooden bracket machine cut of size 50x50x20mm with steel screw between the rail and legs of Table Centre with tightening of all parts of Table Centre. FD-274 |
| 50 | M&L for applying french polishing with best quality french polish on exposed surfaces to table centre till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge.FD-274 |
| 51 | Supply & Fix nylon buffers with machine screw to legs of Table centre complete all as directed by Engineer-in-Charge. FD-274 |
| 52 | Table writing (FD-249 & 275) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 53 | Supply and fixing in replacement of top of table writing with new top of size 1145x600mm new top made out of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/ Archidlam / Centurylam/ Samrat including 4mm thick teak wood beading alround all as shown on drg of Table Writing. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). (FD-249 & 275) |
| 54 | Supply and fixing in replacement of legs of table writing with new leg of size 55x35x740mm made of 1st class hard wood teak/shisham all as specified on drg. (FD-249 & 275) |
| 55 | All as per Srl. Item No. 7.02 but long rails/stiffners (Centre) of size 50x25x 1145mm . (FD-249 & 275) |
| 56 | All as per Srl. Itme No. 7.02 but side stiffener/rails of size 50x25x600mm . (FD-249 & 275) |
| 57 | S & F in replacement of drawers with new drawers made of 18/19mm thick MR Gde plywood with 0.8mm thick laminated sheetof make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround on front of drawer side, 12mm thick of sides of drawer including with 6 mm thick MR Gde Plywood to bottom of drawers including aluminium anodised knob and all as shown on drg of table writing. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). (FD-249 & 275) |
| 58 | S & F in replacement of entire cup board of table writing made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround alround including wall catcher size and shape all as shown on drg of Table Writing. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). (FD-249 & 275) |
| 59 | All as per Srl. Item No. 7.06 but door shutter of cupboard. (FD-249 & 275) |
| 60 | S & F of 1st class hard wood teak/shisham wooden bracket machine cut of size 75 x 75x35mm with steel screw between the rail and legs of Table Writing with tightening of all parts of Table Writing. (FD-249 & 275) |
| 61 | M&L for applying french polishing with best quality french polish on exposed surfaces to table writing till glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-249 & 275) |
| 62 | Supply & Fix nylon buffers with machine screw to legs of Table writing complete all as directed by Engineer-in-Charge. (FD-249 & 275) |
| 63 | Book Case (FD- 237)M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed. |
| 64 | Supply and fixing in replacement of Top of book case made of 18/19mm thick MR Gde plywood covered with laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround size and shape as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). (FD- 237) |
| 65 | All as per Srl. Item no. 8.01 but sides of book case. (FD- 237) |
| 66 | All as per Srl. Item No. 8.01 but shutters of book case including piano type Stainless Steel hinges and including wall catcher of make:- Ebco/Hettich/Godrej and aluminium anodized knob. (FD- 237) |
| 67 | Supply and fixing in replacement of bottom of book case made of 18/19mm thick MR Gde plywood with 4mm thick teak wood beading all as shown on drg. (FD- 237) |
| 68 | All as per Srl. Item No. 8.01 but shelf of book case. (FD- 237) |
| 69 | Supply and fixing in replacement of back of book case made of 6mm thick MR Gde plywood all as shown on drg. (FD- 237) |
| 70 | Supply and fixing in replacement of leg and batten frame of book case made of 1st class hard wood teak/shisham of size and shape as shown on drg. (FD- 237) |
| 71 | Material and labour for french polishing with best quality french polish on exposed surfaces to book case upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed. (FD- 237) |
| 72 | Bin Linen Multipurpose (FD/E6/MAP/09) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed. |
| 73 | Supply and fixing in replacement of unserviceable pair of shutters of Bin Linen Multipurpose made out of 18/19mm thick MR Gde plywood covered with of make:- Greenlam/Archidlam/Centurylam/Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround including piano type Stainless Steel hinges and including wall catcher of make:- Ebco/Hettich/Godrej of size and shape all as specified and shown in drg including aluminium anodized knob as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). (FD/E6/MAP/09) |
| 74 | All as per Srl item No 9.01 here-in-before but side of Bin Linen Multipurpose shape & size all as shown on drg. (FD/E6/MAP/09) |
| 75 | All as per item No. 9.01 here-in-before but top of Bin Linen Multipurpose shape 7 size as shown on drg. (FD/E6/MAP/09) |
| 76 | Supply and fixing in replacement bottom of Bin Linen Multipurpose made out of only 18/19mm thick MR Gde plywood of size and shape shown on drg.(FD/E6/MAP/09) |
| 77 | Supply and fixing in replacement of back of Bin Linen Multipurpose with 6mm thick MR Gde plywood of size and shape as shown on drg. (FD/E6/MAP/09) |
| 78 | Supply and fixing in replacement drawers of Bin Linen Multipurpose made of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape as shown on drg. (FD/E6/MAP/09) |
| 79 | Supply and fixing of shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beading all as shown on drg. (FD/E6/MAP/09) |
| 80 | Supply and fixing in replacement of leg and batten frame bottom of Bin Linen Multipurpose made of 1st class hard wood teak/ shisham of size and shape as shown on drg. (FD/E6/MAP/09) |
| 81 | Material and labour for french polishing with best quality french polish on exposed surfaces to bin linen multipurpose upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed. (FD/E6/MAP/09) |
| 82 | Side Board (FD-241) M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed. |
| 83 | Supply and fixing in replacement of unserviceable pair of shutters of side board made out of 18/19mm thick MR Gde plywood covered with of make:- Greenlam/Archidlam/Centurylam/Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround including piano type Stainless Steel hinges and including wall catcher of make:- Ebco/Hettich/Godrej of size and shape all as specified and shown in drg including aluminium anodized knob as shown on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). (FD-241) |
| 84 | All as per Srl item No 10.01 here-in-before but side of side board all as shown on drg .(FD-241) |
| 85 | All as per item No. 10.01 here-in-before but top of side board.(FD-241) |
| 86 | All as per item No. 10.01 here-in-before but bottom of side board .(FD-241) |
| 87 | Supply and fixing in replacement of back of side board with 6mm thick MR Gde plywood of size and shape all as sqd and shown on drg. (FD-241) |
| 88 | Supply and fixing in replacement drawers of side board made of 18/19mm thick MR Gde plywood with 6mm thick ply at drawer bottom incl knob of size and shape all as spd and shown on drg.(FD-241) |
| 89 | Supply and fixing of shelf made of 18/19mm thick MR Gde plywood with 6mm thick teak wood beading all as shown on drg. |
| 90 | Supply and fixing in replacement of leg and batten frame bottom of side board made of 1st class hard wood teak/ shisham of size and shape as shown on drg. (FD-241) |
| 91 | Material and labour for french polishing with best quality french polish on exposed surfaces to side board upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed. (FD-241) |
| 92 | Table dressing Ladies with Mirror (FD/MAP-II/07) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed. |
| 93 | Supply and fixing in replacement of looking mirror of table dressing ladies with new looking mirror of 5 mm thick of Make:- Saint Gobain/ Modi Guard/ Atul/ Swastik of size 1250x450mm all specified in drg and as directed.(FD/MAP-II/07) |
| 94 | Supply & fixing in replacement of entire frame of mirror of table dressing ladies made of teak wood/Shisham of size and shape all as specified in drg and directed. (FD/MAP-II/07) |
| 95 | Supply & fixing in replacement of 6mm thick MR Gde plywood of back of Mirror of table dressing ladies. (FD/MAP-II/07) |
| 96 | S & F of entire cabinet/box of table dressing ladies made of 18/19mm thick MR Gde plywood covered with laminated sheet of make:- Greenlam/ Archidlam/ Centurylam/ Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround all as shown on drg of Table dressing ladies . (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/ Samratply). (FD/MAP-II/07) |
| 97 | All as per Srl. Item No. 11.04 but of drawers of table dressing ladies all as shown and specified on drg. (FD/MAP-II/07) |
| 98 | S &F Stool Cabinet table dressing ladies made out of 18/19mm thick MR Gde plywood covered with laminated sheet of make:- Greenlam/ Archidlam/ Centurylam/ Samrat including 0.8mm thick PVC edge bending Tape of make:- Rehau/Fixin pasted with probond adhesive/glue alround all as shown on drg of Table dressing ladies including aluminium CP handles and coster wheel arrangement on the base of stool. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/ Samratply). (FD/MAP-II/07) |
| 99 | S &F 32 density 100mm cushions with good quality tapestry cloth cover for detachable stool dressing shape & Size as specified in drawing or as directed.(FD/MAP-II/07) |
| 100 | Material and labour for french polishing with best quality french polish on exposed surfaces to table dressing ladies up to glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed. (FD/MAP-II/07) |
| 101 | Table dining 6/8 persons (FD-273 & FD MAP -II/03) : M & L for removing the unserviceable components/parts without damaging the other existing components/ parts or structure of the following items, supply and fixing new components/ parts as shown in drawing and as directed by Engr-in-Charge |
| 102 | Supply and fixing in replacement of top of table dining 6 person of size 1500x900mm made of 18/19mm thick MR Gde plywood covered with 0.8mm thick laminated sheet of make:- Greenlam/Archidlam/ Centurylam/ Samrat including 4mm thick teak wood beading alround to top to table dining 6 persons, rest all as specified on drg. (Make of Plywood :- Archidply/ Greenply/ Centuryply/ BTSP(Gold)/Samratply). (FD-273 & FD MAP -II/03) |
| 103 | All as per Srl. Item No. 12.01 but top of Table dining 8 persons of size 1800x900mm. (FD-273 & FD MAP -II/03) |
| 104 | Replacement of legs of table dinning 6/8 persons with new legs of size 75x40x740mm made of 1st class hard wood teak/shisham, all as specified on drg. (FD-273 & FD MAP -II/03) |
| 105 | All as per Srl. Item No. 12.03 but long rails of size 1500x100x25mm thick size and shape all as shown on drg. (FD-273 & FD MAP -II/03) |
| 106 | All as per Srl. Item No. 12.03 but long rails of size 1800x100x25mm thick for 8 persons. (FD-273 & FD MAP -II/03) |
| 107 | All as per Srl. Item No. 12.03 but side rails of size 900x100x25mm thick for 6/8 persons. (FD-273 & FD MAP -II/03) |
| 108 | All as per Srl. Item No. 12.03 but wooden bracket machine cut of size 100x100x25mm for table 6/8 persons. (FD-273 & FD MAP -II/03) |
| 109 | Material and labour forapplying french polishing with best quality french polish on exposed surfaces to table dining 6/8 persons upto glossy finish after removing the old polish from emery paper with grinder machine and preparation of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface of old polished surfaces by providing putty and scrapping the unwanted spot on wood surface as specified and directed by Engineer-in-Charge. (FD-273 ,376 & FD MAP -II/03) |
| 110 | Supply & Fix nylon buffers with machine screw to legs of Table dinning complete all as directed by Engineer-in-Charge. (FD-273 & FD MAP -II/03) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender