Tender For Addn /Altn /Improvement And Expansion Of Building No P-80 (Jcos) Club At Chaf Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Oct 2026
9 days left
EMD
88704
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Addn /Altn /Improvement And Expansion Of Building No P-80 (Jcos) Club At Chaf Banglaore
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | Tender Corrigendum | Other | 29-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-charge. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) complete all as specified and as directed by Engr-in-charge. |
| 3 | Demolition of brickwork or stone /boulder masanory, laid dry below or above ground level and removing material from site complete all as specified and as directed by Engr-in-charge. |
| 4 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc, not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed by Engr-in-charge. |
| 5 | Material and labour for plain cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) as in foundation complete all as specified and as directed by Engr-in-charge. |
| 6 | Material and labour for pre-cast cement concrete block masonry with solid blocks type C1, 1:3:6 (Using 20mm graded stone aggregate) exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 7 | Material and labour for providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1, 1:3:6 (Using 20mm graded stone aggregate) and setting in cement mortar 1:6 in walls complete all as specified and as directed by Engr-in-charge. |
| 8 | Material and labour for 100mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) in sub base of flooring or pavings etc., complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for 25mm thick plain cement concrete 1:2:4 type B-0 (Using 12.5mm graded stone aggregate) complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for makrana white marble work 18 to 20mm thick (table rubbed and polished) in floors, steps, jambs, pillars, window cills and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble and mirror polishing on marble to give high gloss finish complete for treating the surface with beeswax polish including 15mm thick screed bed for laying floor tiles CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 11 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 12 | Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.06 sqm but not exc 0.11 sqm, in floors etc., set and jointed in neat cement slurry over and including 15mm thick screed bed of cement mortar 1:6 and pointed with white or coloured cement to match complete all as specified and as directed by Engr-in-charge. |
| 13 | Material and labour for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm/ 600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick rendering/ backing coat in CM 1:4 complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for granite slab work 18 to 20mm thick in floors steps, cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with granite shade over and including screed bed 15mm thick in CM 1:6 including dismantling complete all as specified and as directed by Engr-in-charge. |
| 15 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engr-in-charge. |
| 16 | Surface excavation not exc 30 cms deep and averaging 15 cms deep and getting out soft /loose soil complete all as specified and as directed by Engr-in-charge. |
| 17 | Material and labour for 100mm thick hardcore of gauge not exc 63mm of broken stone, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-charge. |
| 18 | Material and labour for coloured designed chequered cement concrete tiles of a size 300x300x25mm thick with white cement and pigment in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of cement mortar 1:6 complete all as specified and as directed by Engr-in-charge. |
| 19 | Material and labour for 7.5cm thick (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed by Engr-in-charge. |
| 20 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed by Engr-in-charge. |
| 21 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed by Engr-in-charge. |
| 22 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and as directed by Engr-in-charge. |
| 23 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 24 | Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required as per manufacturers instructions complete all as specified and as directed by Engr-in-charge.Note: WPC shall be measured and paid separately. |
| 25 | Extra forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds complete all as specified and as directed by Engr-in-charge. |
| 26 | Add or deduct to as per item No.25 here-in-before for each 25mm girth or part thereof over or under 30cm inner girth complete all as specified and as directed by Engr-in-charge. |
| 27 | Supply only liquid water proofing compound ISI marked complete all as specified and as directed by Engr-in-charge. |
| 28 | Material and labour for rendering 10mm thick in CM 1:3 in ceiling on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 29 | Material and labour for preparing new plastered surfaces and applying three coats of white wash on surfaces of walls in walls complete all as specified and as directed by Engr-in-charge. |
| 30 | Material and labour for preparation of newly plastered surfaces of walls and applying through mechnical means two coats of oil bound distember (white or tined) over a coat of approved primer to obtain uniform surfaces including making good the surface complete all as specified and as directed by Engr-in-charge. |
| 31 | Material and labour for preparation of newly plastered surfaces of walls and applying through mechnical means two coats of exterior emulsion paint over one coat of primer complete all as specified and as directed by Engr-in-charge. |
| 32 | Material and labour for preparing of new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed by Engr-in-charge. |
| 33 | Material and labour for framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 34 | Supply and fix for mild steel, plain, blacksheet 1.25mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc., as required complete all as specified and as directed by Engr-in-charge. |
| 35 | Supply and fix for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete all as specified and as directed by Engr-in-charge. |
| 36 | Supply and fix for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed by Engr-in-charge. |
| 37 | Supply and fix in repairs powder coated fancy type stainless steel curtain rod 25mm dia with suitable SS brackets with suitable wooden round base and fancy type end top matching to curtain rod of complete all as specified and as directed by Engr-in-charge.Note: Additional supporting bracket shall be provided if length is exc 1.2m and rate quoted shall include for the same. |
| 38 | Taking down of chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 39 | Taking down of chowkats or frames exc 1.5 sqm but not exc 4 sqm each with shutters (without taking off shutters from the frames) and set aside or removing from site complete all as specified and as directed by Engr-in-charge. |
| 40 | Supply and fix for factory made uPVC door frame made of uPVC extruded sections having an overall dimension (extruded section profile) 48x40mm (tolerance ± 1mm), with wall thickness 2.0mm (± 0.2 mm), corners of the door frame jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19x19mm and 1mm (± 0.1mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and as directed by Engr-in-charge. |
| 41 | Supply, and fix for 30mm thick factory made polyvinyl chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30mm and wall thickness 2mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220mm having wall thickness 1.0mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20mm and 1mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30mm and 2mm (+ 0.2mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620mm, having over all thickness of 20mm and 1mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6mm galvanised M.S. rod and fastened with nuts and washers complete all as specified and as directed by Engr-in-charge. |
| 42 | Supply and fix for factory made uPVC white colour three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed and one no. wire mesh panels) upto 1.50m height made of (big series) frame 116x45mm and sash 46x62mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stainless steel screws etc., profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc., after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved qualitycomplete all as specified and as directed by Engr-in-charge.Notes: (i) Glass or wiremesh shall be measured and paid separately.(ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 43 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, G.I. fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and as directed by Engr-in-charge.Notes: (i) Glass shall be measured and paid separately.(ii) For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 44 | Supply and fix for 5.50mm thick sheet glass ordinary quality and glazing with EPDM rubber/ neoprene gasket etc., exc 0.50 sqm in each panes complete all as specified and as directed by Engr-in-charge. |
| 45 | Supply and fix for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-charge. |
| 46 | Supply and fix for solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube in opening complete all as specified and as directed by Engr-in-charge. |
| 47 | Supply and fix for factory made solid PVC moulded door shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame at site complete all as specified and as directed by Engr-in-charge. |
| 48 | Supply and fix for 100mm mild steel butt hinges, medium weight, cold rolled complete all as specified and as directed by Engr-in-charge. |
| 49 | Supply and fix for 100mm long extruded brass handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 50 | Supply and fix for 150mm aluminium anodised barrel tower bolts of stove enameled black, with bright bolt and fixed complete all as specified and as directed by Engr-in-charge. |
| 51 | Supply and fix for toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed by Engr-in-charge. |
| 52 | Supply and fix for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engr-in-charge. |
| 53 | Supply and fix for soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed by Engr-in-charge. |
| 54 | Supply and fix for 18mm thick veneered decorative plywood, grade 1 (with BWR resin), with decorative face veneers on both faces fixed with screws to timber frame work for built in cupboards, shelves, almirahs etc., complete all as specified and as directed by Engr-in-charge. |
| 55 | Supply and fix for brass mortice lock, vertical type, size 100mm 4 levers include for escutcheon plates and two keys in repairs complete all as specified and as directed by Engr-in-charge. |
| 56 | Supply and fix for stainless steel clip on auto closing panel concealed hinges thickness 15-22mm for full overlay door 0 degree crank for cupboard door complete all as specified and as directed by Engr-in-charge. |
| 57 | Supply and fix for 100mm long extruded brass handles, fabricated type polished complete all as specified and as directed by Engr-in-charge. |
| 58 | Dismantling water tanks exc 500 ltrs and not exc 1000 ltrs complete all as specified and as directed by Engr-in-charge. |
| 59 | Supply and fix for rotational moulded polyethylene water storage tanks of white colour triple layered (ISO certified) (cylindrical vertical with closed top) hoisted and fixed in position all as specified of capacity 500 liter, including 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by Engr-in-charge. |
| 60 | Supply and fix in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and as directed by Engr-in-charge. |
| 61 | Taking up or down 15mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 62 | Taking up or down 20mm dia steel tubing connections, including cleaning for re-fixing or removal to store complete all as specified and as directed by Engr-in-charge. |
| 63 | Supply and fix for tubes, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 20mm bore pipe line, including cutting holes or grooves in brick wall /RCC and making good with cement mortar 1:3 complete all as specified and as directed by Engr-in-charge. |
| 64 | Supply and fix for tubes, ‘medium grade’ galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors of 15mm bore concealed pipe line, including cutting holes or grooves in brick wall /RCC and making good with cement mortar 1:3 complete all as specified and as directed by Engr-in-charge. |
| 65 | Supply and fix in repairs stop valve/ angle cock 15mm bore fancy type chromium plated screwed down high pressure, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-charge. |
| 66 | Supply and fix in repairs fancy type CP 2 way angle cock with wall flanges complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply and fix for 15mm long body bib taps long shank cast copper alloy with crutch or butterfly hadle secrwed for iron piper or for brass ferrule fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply and fix for single lever wash basin mixer fancy type with capasten head chromium plated screwed down high pressure with without lettered 'hot' or 'cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 69 | Supply and fix for brass CP mixer fancy type for mixing hot and cold water chromium plated screwed down high pressure with for iron pipe with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 70 | Supply and fix in repairs fancy type 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed by Engr-in-charge. |
| 71 | Supply and fix in repairs 15mm bore PVC connection pipe 400mm long with PTMT nuts at both ends complete all as specified and as directed by Engr-in-charge. |
| 72 | Supply and fix for chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to 15mm bore steel pipe or union fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 73 | Supply and fix in repair towel rail 20mm dia chromium plated including 600mm long including brackets, screws and wooden /plastic cleats complete all as specified and as directed by Engr-in-charge. |
| 74 | Supply and fix in repairs health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engr-in-charge. |
| 75 | Suppy and fix for 5mm thick frameless bevelled edge full length rectangular decorative wall dressing mirror of selected quality, mounted on walls fixed to plugs with chromium plated brass screws and cup washers fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 76 | Supply and fix in repairs PVC flushing cistern 10 ltrs capacity valveless syphonic action type low level, white, with inlet, ball valve float and handle including brackets and flush pipe complete all as specified and as directed by Engr-in-charge. |
| 77 | Supply and fix in repairs vitreous china premium quality/ 1st quality wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) and incl 01 No ‘P’ or ‘S’ trap of dia 100mm including provn of lime concrete bedding complete all as specified and as directed by Engr-in-charge. |
| 78 | Supply and fix in repairs table top wash hand basin vitreous china, light colour/ white of size 565x420x140mm including brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets, 32mm bore PVC waste pipe of appropriate length ilcluding making necessary connections complete all as specified and as directed by Engr-in-charge. |
| 79 | Supply and fix in repairs vitreous china urinals, half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed by Engr-in-charge. |
| 80 | Supply and fix in repairs urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60gms) complete all as specified and as directed by Engr-in-charge. |
| 81 | Taking down rain water pipes including all fittings any size and pattern with fittings complete all as specified and as directed by Engr-in-charge. |
| 82 | Supply and fix for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 83 | Supply and fix for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 84 | Supply and fix for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 85 | Supply and fix for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 86 | Supply and fix for PVC (SWR) floor trap 75mm dia outlet, plain /hole with grating including jointing with solvent cement complete all as specified and as directed by Engr-in-charge. |
| 87 | Supply and fix for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 88 | Supply and fix for PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 89 | Supply and fix for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 90 | Supply and fix for PVC (SWR) bends any radius with access doors 75mm bore complete all as specified and as directed by Engr-in-charge. |
| 91 | Supply and fix for PVC (SWR) junction single, (single T) equal or unequal with access door 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 92 | Supply and fix for PVC (SWR) vent cowl 110mm bore complete all as specified and as directed by Engr-in-charge. |
| 93 | Material and labour for PVC (SWR) gully trap 125 /110mm, setting and jointing with solvent complete all as specified and as directed by Engr-in-charge. |
| 94 | Material and labour for providing, lowering, laying, aligning and fixing in position and joining at all level /depths full round HDPE DWC pipes (double wall corrugated) of 150mm dia bore with reqd jointing accessories of SN-8 grade as per IS-16098 (Part-2) amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site for testing) and commissioning complete all as specified and as directed by Engr-in-charge. |
| 95 | Material and labour for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2 for 150mm dia pipe complete all as specified and as directed by Engr-in-charge. |
| 96 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engr-in-charge. |
| 97 | Material and labour for RCC 1:2:4, type B1 (Using 20mm graded stone aggregate) as in pre-cast cover slabs for shelves and similar articles incl necessary form work complete all as specified and as directed by Engr-in-charge.Note: Reinforcement will be measured and paid separately. |
| 98 | Dismantling structural steel work including doors, gates and similar works but excluding framed truss etc., complete all as specified and as directed by Engr-in-charge. |
| 99 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-charge. |
| 100 | Supply and fix for steel work in tubular trusses including special shaped washer etc., complete using ERW or indluding butt welded tubes conforming to I.S.1161-1998 grade St-240 complete all as specified and as directed by Engr-in-charge. |
| 101 | Supply and fix for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410- W (Gde-E-250) quality-B complete all as specified and as directed by Engr-in-charge. |
| 102 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws/ J hooks and bolts as reqd complete all as specified and as directed by Engr-in-charge. |
| 103 | Supply and fix for pre-painted galvalume aluminium zinc coating GI based plain steel sheeting 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws/ J hooks and bolts as reqd complete all as specified and as directed by Engr-in-charge. |
| 104 | Dismantling ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards /slabs/ blankets, any thickness, including cover fillets etc., complete all as specified and as directed by Engr-in-charge. |
| 105 | Supply and fix for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and as directed by Engr-in-charge. |
| 106 | Supply and fix for hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engr-in-charge. |
| 107 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wiremesh (fillets, metal frame work and G.I. wire mesh paid separately) complete with designer ceiling (with part ply, laminate and cover) complete all as specified and as directed by Engr-in-charge. |
| 108 | Material and labour for two coats of distemper oil emulsion white or tinted incl over a coat of acrylic primer with 1mm thick wall care putty, including preparation of new surface on ceiling complete all as specified and as directed by Engr-in-charge. |
| 109 | Material and labour for providing for wall /roof sheeting 6mm thick multicavity polycorbonite sheet with necessary aluminium profile with EDPM gasket at every joint of sheet and covered with aluminium section 25x25mm sheet and profile to be fastened to structure by using 45mm-SDST screws incl dismantling old sheets complete all as specified and as directed by Engr-in-charge. |
| 110 | Taking down old damaged existing water proofing membrane of any thickness from roof top complete all as specified and as directed by Engr-in-charge.Note: All waste materials shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. (G+3 bldgs). |
| 111 | Material and labour for water proofing treatment on horizontal and vertical surfaces with providing and laying /fixing TPO (Thermoplastic Polyolefin) membrane incl cleaning the surface and laying of 200GSM Geo textile and cover up with TPO RF 1.2mm thermoplastic membrane on roof & amp; up to 300mm of parapets and crumple joint including junction of roof and parapet, welding the seam joints with hot airgun /machine and terminate the corners with extra protection to bear the high wind pressure. The TPO should be thoughroly tightened with the lower structure using mechanical fastening properly to avoid the corners and seam joint failure complete all as specified and as directed by Engr-in-charge. (G+3 bldgs) |
| 112 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-charge.Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. (G+3 bldgs) |
| 113 | Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed by Engr-in-charge.(G+3 bldgs) |
| 114 | Material and labour for PCC 1:2:4 type B-1 (Using 20mm graded stone aggregate) as in roof/ chajja padding for maintaining roof /chajja slope complete all as specified and as directed by Engr-in-charge. (G+3 bldgs) |
| 115 | Material and labour for rendering 10mm thick cement plaster 1:3 on roof padding finished even and fair with approved water proofing compound @ 3% by weight of cement or as per manufacture's instruction including taking down existing cement plaster /lime plaster complete all as specified and as directed by Engr-in-charge. (G+3 bldgs)Note: WPC will be measured and paid seperately as supply only under relevant item. |
| 116 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exc 10 sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil etc., complete all as specified and as directed by Engr-in-charge. |
| 117 | Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm in soft/ loose soil complete all as specified and as directed by Engr-in-charge. |
| 118 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soils in soft /loose soil complete all as specified and as directed by Engr-in-charge. ( Item 117 of Job A + item 50 of Job B) |
| 119 | Removing excavated material exc 1.50 Km but not exc 5.00 Km and depositing where directed complete all as specified and as directed by Engr-in-charge. |
| 120 | Material and labour for plain cement concrete type C-2 1:3:6 (Using 40mm graded stone aggregate) in posts, foundations, filling and mass concrete etc., complete all as specified and as directed by Engr-in-charge. |
| 121 | Supply and fix for mild steel fencing posts, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) conforming to Fe-290 Gde E-165 including distance pieces, cleats, nut and bolt any size and length etc., complete all as specified and as directed by Engr-in-charge. |
| 122 | Supply and fix for mild steel screw bolts with haxagonal or square heads at one end and screwed at other fitted with washers and one hexagonal nut length of bolt exc 5cm but not exc 10cm and diameter of neck in 11 to 15mm complete all as specified and as directed by Engr-in-charge. |
| 123 | Supply only 75x75x4mm dia chain link MS galvanised fencing or any size or type complete all as specified and as directed by Engr-in-charge. |
| 124 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provission of binding wire and taking down old fencing complete all as specified and as directed by Engr-in-charge. |
| 125 | Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide priming complete all as specified and as directed by Engr-in-charge. |
| 126 | Material and labour for preparation of newly plastered or unplastered concrete surfaces (obtaining smooth surface) of any description not otherwise described over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed by Engr-in-charge. |
| 127 | Material and labour for providing precast cement concrete louvres and jallies, type B0 1:2:4 (Using 12.5mm graded stone aggregate) 50mm thick (measured solid) including all mouldings but not excluding frame set in cement mortar 1:4 including dismantling existing louvres and jallies complete all as specified and as directed by Engr-in-charge. |
| 128 | Material and labour for cement concrete type B0 1:2:4 (Using 12.5mm graded stone aggregate) as in coping, roof kerbs or mud stops, rounded or chamfered on edges etc., complete all as specified and as directed by Engr-in-charge. |
| 129 | Material and labour for preparation of plastered or unplastered old decorated surfaces of filling holes and cracks with suitable material like white cement or plaster of paris and applying one coat distemper oil emulsion, using mechanical means white or tinted complete all as specified and as directed by Engr-in-charge. |
| 130 | Material and labour for preparation of plastered or unplastered old decorated surfaces of filling holes and cracks with suitable material like white cement or plaster of paris and applying one coat white wash, using mechanical means white or tinted complete all as specified and as directed by Engr-in-charge. |
| 131 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot's, moulds, moss and efflorescent salts and treating oily and greasy spot and filling holes and cracks with suitable material like white cement or plaster of paris and applying one coat of cement base paint complete all as specified and as directed by Engr-in-charge. |
| 132 | Material and labour for preparation of old painted steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engr-in-charge. |
| 133 | Removing demolished material i.e. building materials, concrete, stone masonary, debris, tree roots, trunk, branches of any size etc., to a distance of 20 Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination complete all as specified and as directed by Engr-in-charge. |
| 134 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket, fan regulators any type, rectangular board, light fittings, terminal boxes etc., removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed by Engr-in-charge. |
| 135 | Material and labour for point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, including metal flush box of 1.60mm thick suitable for modular switches/ sockets/ fan regulators including modular white cover plate and modular metal flush box with frame of required modules at site, blanking plates, brass screws, cup washers etc., including all cutting/ chases etc., in stone/ brick masonary/ walls, pinning in stone walls/ brick walls and pointing in cement mortar 1:3 to ends or edges of landing etc., for concealed conduit wiring using heavy duty stone drilling/ cutter machine and making good to the disturbed surfaces to match the existing surface of wall /ceiling complete all as specified and as directed by Engr-in-charge for the followings: |
| 136 | One light point controlled by one, 1 way switch 06 Amps. |
| 137 | One ceiling /wall fan point controlled by one, 1 way switch 06 Amps. |
| 138 | One exhaust fan point controlled by one, 1 way switch 06 Amps. |
| 139 | One 3 pin, 06 Amps socket outlet point on independent board controlled by one, 1 way 06 Amps switch. |
| 140 | One 3 pin, 06 Amps socket outlet point on same board controlled by one, 1 way 06 Amps switch. |
| 141 | All as per item No.135 here-in-before but point wiring with 2.5 sqmm single core FRLS cables and earth continuity wire of 2.5 sqmm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and as directed by Engr-in-charge.Note for item Nos.135 to 136: Cutting into or through the stone walls /brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling/ cutter machine and making good the disturbed surface shall be measured and paid separately under relevant item no. 143. |
| 142 | Supply and fix for modular switch, 6 Amps, single pole, 1 way, 230 volts, 1 module complete all as specified and as directed by Engr-in-charge. |
| 143 | Supply and fix for modular switch, with indicator, 16 Amps, single pole, 1 way, 230 volts complete all as specified and as directed by Engr-in-charge. |
| 144 | Supply and fix for modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified and as directed by Engr-in-charge. |
| 145 | Supply and fix for modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete all as specified and as directed by Engr-in-charge. |
| 146 | Supply and fix for ceiling rose, 65x50mm surface type with 3 terminals incl connection complete all as specified and as directed by Engr-in-charge. |
| 147 | Supply and fix for ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts complete all as specified and as directed by Engr-in-charge. |
| 148 | Cutting into or through the stone walls /brick walls built in cement mortar or cement lime mortar and walls of cement concrete suitable size for housing for sunk box using heavy duty stone drilling /cutter machine and making good the disturbed surface complete all as specified and as directed by Engr-in-charge. |
| 149 | Supply and fix for surface /wall mounted LED batten, 20 watt, 230 V, AC, 4 feet, white /warm white, decorative box type with intigrated electronic drive and accessories including connection complete including taking down old/unsv light fitting complete all as specified and as directed by Engr-in-charge. |
| 150 | Supply and fix for on surface /wall mounted LED batten, robust extruded aluminium housing and intigrated electronic drive 10 watt, 2 feet, with accessories including connection with 2 core flexible copper conductor cable of suitable size from ceiling rose incl taking down old/unsv light fitting complete all as specified and as directed by Engr-in-charge. |
| 151 | Supply and fix for surface/ ceiling recessed mounted LED panel type of size 2 ft x 2 ft, 36 W, 230 V, white /warm white type complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling including taking down old/unsv light fitting complete all as specified and as directed by Engr-in-charge. |
| 152 | Supply and fix for round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engr-in-charge for the following wattage: |
| 153 | 12 Watt |
| 154 | 15 Watt |
| 155 | Supply and fix for flexible LED strip light 24 watt uses high brightness as the light source for indoor application in warm/ CDL/ any other colour as required/ directed including suitable LED drivers and connection complete all as specified and as directed by Engr-in-charge. |
| 156 | Disconnection and taking down old/ unsv/ faulty fan any type /size and depositing to MES store complete all as specified and as directed by Engr-in-charge. |
| 157 | Disconnection and taking down old/ unsv/ faulty fan /air circulator any type /size and re-fixing after re-wiring at desired location complete all as specified and as directed by Engr-in-charge. |
| 158 | Supply and fix for ceiling fan complete with three blades, down rod, accessories 230 V, 1200mm sweep, min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) incl connection including taking down old fan any sweep and depositing to MES store yard complete all as specified and as directed by Engr-in-charge. |
| 159 | Supply and fix for wall mounting fan 400mm sweep, 1350 RPM, adjustable, plastic blade grill for protection, pull cord control for speed and oscillation on-off, incl connection complete all as specified and as directed by Engr-in-charge. |
| 160 | Supply and fix for exhaust fan, 300mm sweep, steel body, AC single phase, 230 V with blades, and frame and louvers shutters incl making hole of required size in the wall with necessary civil /cutting /plywood work /plastering work all as required for proper fixing of fan in window /wall and matching of surface with existing surface complete all as specified and as directed by Engr-in-charge. |
| 161 | Supply and fix for water heater storage type (geyser), capacity 25 litres, 230 volt, AC, BEE 5 star rated, white in colour to be fixed on wall with suitable size of nuts/ bolts/ fasteners and washers incl making good the disturbed surfaces of wall incl necessary cold and hot water connection with suitable 02 Nos heavy duty connection pipe of SS rope threaded type with brass unions at both ends, 45 cm long, 15mm bore complete all as specified and as directed by Engr-in-charge. |
| 162 | Supply and fix for energy saving security light fitting of 45 watts LED pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 sqmm, 3 core as required for connections, fitting to be fitted on old /new GI bracket incl taking down old/ unsv fittings complete all as specified and as directed by Engr-in-charge.Note: New GI bracket will be measured and paid seperately. |
| 163 | Supply and fix for energy saving LED flood light fitting, 120 watt, envioronmental friendly, long life, die cast aluminium IP 66 comprising with electronic driver and all accessories, pre-wired, fitting to be fitted on wall /pole with necessary fixing arrangement with nut, bolts, washers etc., as required /directed at site incl connection with PVC insulated copper conductor cable 1.5 sqmm, 3 core incl taking down old /unsv fittings complete all as specified and as directed by Engr-in-charge. |
| 164 | Supply and fix for security light mounting bracket made out of 40mm bore light grade GI tube of suitable length, bend to shape and fixed to wall /pole by means of 02 nos of 40x5mm flat iron clamps, nuts, bolts and washers etc., complete all as specified and as directed by Engr-in-charge. |
| 165 | Supply and fix for post top lantern light fitting, LED type, 230 volts, AC, outdoor type, 40 watt with decorative post top for 360 degree indirect light IP 65 protection, made from aluminium housing with impact and corrosion resistant with driver and lamp, fitting to be fittied and incl GI pipe of required length and size, fixed at gate /wall incl connection incl taking down old fitting complete all as specified and as directed by Engr-in-charge. |
| 166 | Material and labour for PVC cable loop box size not less than 200x140x95mm, outdoor type, duly fitted on wall /pole with suitable clamp, nuts, bolts and washers incl to accommodate and incl 01 No of MCB SP 6 Amp, 'B' series, suitable aluminium with bus bar of 3 phase porcelain insulated connectors incl suitable size of lugs and gland for incoming and outgoing cables, fixed in repairs complete all as specified and as directed by Engr-in-charge. |
| 167 | Taking down existing split air conditioner carefully of any make /capacity incl indoor /outdoor unit with accessories complete from the wall of ICU and re-installation of the same at desired /new location including testing complete all as specified and as directed by Engr-in-charge. |
| 168 | Material and labour for cutting of existing stone masonry wall for crossing the suction, discharge pipe line and electric line connection of split type air conditioner and after the connection necessary cement work will be provided for making the surface as good complete all as specified and as directed by Engr-in-charge. |
| 169 | Supply and fix for copper tubing for refrigerant suction line of split AC of size 16mm drawn through pipes/ fixed to walls/ laid on floor or roof in all respects complete all as specified and as directed by Engr-in-charge. |
| 170 | Supply and fix for copper tubing for refrigerant suction line of split AC of size 9mm drawn through pipes/ fixed to walls/ laid on floor or roof in all respects complete all as specified and as directed by Engr-in-charge. |
| 171 | Supply and fix for heat insulation superior quality nitrile rubber of 9mm thickness, ISI marked for copper tubing of any size of refrigerant line including necessary clamps, PVC tape knots etc., complete all as specified and as directed by Engr-in-charge. |
| 172 | Supply and fix for AC drain hose outlet PVC pipe of standard size 20mm complete all as specified and as directed by Engr-in-charge. |
| 173 | Supply and fix for PVC insulated FRLSH copper conductor control cables of size 2.5 sqmm 5 core for outdoor to indoor unit connection for split AC complete all as specified and as directed by Engr-in-charge. |
| 174 | Supply and fix for bracket of suitable size for outdoor unit of air conditioning complete all as specified and as directed by Engr-in-charge. |
| 175 | Material and labour for Refrigerant gas for split AC of capacity 1.5 /2 TR as required of following type complete all as specified and as directed by Engr-in-charge. |
| 176 | R-410 |
| 177 | Material and labour for sub main wiring with 2.5 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 2.5 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chasses, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and as directed by Engr-in-charge.Note: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length. |
| 178 | Material and labour for sub main wiring with 4 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 4 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chasses, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and as directed by Engr-in-charge.Note: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length. |
| 179 | Material and labour for sub main wiring with 6 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 6 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chasses, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and as directed by Engr-in-charge.Note: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length. |
| 180 | Material and labour for sub main wiring with 10 sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 10 sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting /chasses, pinning etc., in stone/ brick masonary/ walls and making good to the disturbed surfaces to match the existing complete all as specified and as directed by Engr-in-charge.Notes: One run of earth continuity conductor, one run of PVC conduit concealed in wall and two run of copper conductor together taken as one length for measuring unit length.Note for sl item Nos.166 to 172: Chasis/ groove cutting in stone walls/ brick wall/ block masonary walls as required for concealed sub main wiring shall be measured and paid separately under relevant item No.173. |
| 181 | Cutting chasis, pinning in brick wall etc., making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings etc., for concealed conduit wiring a into or through the stone walls built in cement mortar or cement lime mortar and walls of cement concrete suitable for housing 25mm dia conduit pipe using heavy duty stone drilling /cutter machine and making good the disturbed surface complete all as specified and as directed by Engr-in-charge. |
| 182 | Supply and fix for sheet metal enclosure with socket plug top and neutral enclosure with a two pin and earth plug and socket complete with 01 No SPN MCB 20 Amps 'C' curve type, incl taking down old/unsv complete all as specified and as directed by Engr-in-charge. |
| 183 | Supply and fix for VTPN sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal double door, IP 43 protection, suitable for MCCB 4 pole 125 amps as incomer and MCB SP/ SPN as outgoing along with cable end box for above DB and concealed flush in wall including all cutting chases /civil work as required in stone/ brick masonary/ walls, pinning in stone walls /brick walls and pointing in cement mortar 1:3 to ends or edges of landing etc incl connection and taking down old unsv DB complete all as specified and as directed by Engr-in-charge.Note: MCCB/ MCB SP /SPN will be measured and paid seperately. |
| 184 | Supply and fix for sheet metal enclosure DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs incl chases wall for fixing DB and making good to the disturbed surface incl taking down old/unsv DB complete all as specified and as directed by Engr-in-charge for the following No of ways:- |
| 185 | 4 way |
| 186 | 8 way |
| 187 | 12 way |
| 188 | Supply and fix for MCCB, 100 Amps, 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 /25 KA, suitable for load line/ VTPN DB/ LT panel and connection incl taking down old/unsv complete all as specified and as directed by Engr-in-charge. |
| 189 | Supply and fix for MCB SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs incl taking down old/faulty MCB complete all as specified and as directed by Engr-in-charge of following rating:- |
| 190 | 40 Amps |
| 191 | 63 Amps |
| 192 | Supply and fix for MCB SP, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs incl taking down old/faulty MCB complete all as specified and as directed by Engr-in-charge of following rating:- |
| 193 | 10 to 32 Amps |
| 194 | 40 Amps |
| 195 | Supply and laying or fixing or passing through pipe in repair of 1100V grade, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of complete all as specified and as directed by Engr-in-charge of following nominal cross section area /sizes:- |
| 196 | 10 Sqmm 2 core |
| 197 | 16 Sqmm 4 core |
| 198 | 35 Sqmm 3.5 core |
| 199 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth, getting out for electric cable complete in any type of soil complete all as specified and as directed by Engr-in-charge. |
| 200 | Removing surplus excavated soil to a distance not exc 50m and depositing where directed at a level not exc 1.5m above starting point complete all as specified and as directed by Engr-in-charge. |
| 201 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat, size 250x150x40mm complete all as specified and as directed by Engr-in-charge. |
| 202 | Material and labour for sand filling (pulverized stone dust) for sand cushioning incl spreading and levelling for protection of cable complete all as specified and as directed by Engr-in-charge.Note: Only punned thickness shall be measured for payment. |
| 203 | Material and labour for GI tubing, light grade with all necessary fittings laid in trenches /under road crossing/ fixed on pole /wall /under floor including suitable mild steel FI clamps of reqd size for protection of LT UG cable complete all as specified and as directed by Engr-in-charge of following size:- |
| 204 | 40mm bore |
| 205 | 50mm bore |
| 206 | Material and labour for dismantling old concrete pole of any size/ length including connected items complete all as specified and as directed by Engr-in-charge. |
| 207 | Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised earth lead wire 4mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point or indiacted including testing on completion complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 16, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 29, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender