Tender For Provn Of Store Room At Mil Stn Nainital.
Tender Value
20.49 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
40980
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Store Room At Mil Stn Nainital.
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep & getting out in any type soil complete all as specified. |
| 2 | Excavating over areas, in soft disintegrated / Hard rock n exc 1.5 m deep and getting out complete all as specified and directed. |
| 3 | Excavation intrenches in soft disintegrated / Hard rock, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out complete all as specified and directed. |
| 4 | M&L for PCC 1:5:10 type E-2 (40mm graded aggregate) in foundation filling and mass concrete.complete all as specified and directed. |
| 5 | M&L for Reinforced Cement concrete M-25 (design mix)(20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete.complete all as specified and directed. |
| 6 | M&L Reinforced Cement concrete M-25 (design mix)(20 mm graded aggregate)in columns, pillars, piers, posts and struts.complete all as specified and directed. |
| 7 | Material and Labour for RCC M-25 (design mix) (using 20mm graded crushed stone aggregate) for Beams catileveres bressummerslintels over1.5m span and similar workcomplete all as specified and directed |
| 8 | Material and Labour for RCC M-25 (design mix) (using 20mm graded crushed stone aggregate) for chajja etc all as specified. |
| 9 | Material and Labour for RCC M-25 (design mix) (using 20mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 10 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified. |
| 11 | Use and waste Formwork to sides of pillars, post, stuts, coloumn and stanchirns complete all as specified. |
| 12 | Use and waste Formwork to rough finished surfaces of chullah hoods, chajjas troughs and similar items including edges complete all as specified. |
| 13 | Use and waste Formwork to rough finished surfaces of sides and soffits of floor or roof beam, beam haunching, lintels, cantilevers, shelves including supports, overhangs etc complete all as specified |
| 14 | Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified |
| 15 | M&L for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips as specified. |
| 16 | M&L mild steel TMT 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookings ends and binding mild or securing with clips as specified. |
| 17 | M & L for brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM1:6 complete all as specified and directed. |
| 18 | M & L Rendering 15 mm thick cement plaster on fair surfaces of brick work or concrete surfaces in CM 1:4 finished to even and smooth in without using extra cement incl.complete all as specified and directed. |
| 19 | M & L Supply only intergral water proofing compound. complete all as specified and directed. |
| 20 | M & L Rendering 10 mm thick cement plaster on fair brick work or concrete surfaces in CM 1:6 finished to even and smooth sitfaces in without using extra cement incl.complete all as specified and directed. |
| 21 | M & L Rendering 5 mm thick cement plaster on concrete surfaces of ceiling in CM 1:3 finished to even and smooth sitfaces in without using extra cement incl.complete all as specified and directed. |
| 22 | M & L Preperaing new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. |
| 23 | M & L Preperaing new plastered surfaces of wall and applying two coats of OBD over a coat of primer complete all as specified and directed. |
| 24 | M & L Preperaing new plastered surfaces of ceiling and applying two coats of OBD over a coat of primer all as specifed. |
| 25 | M & L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed. |
| 26 | M & L Removing surplus excavater soil to a distance n exc 50 m and deposting where directed at a level n exc 1.5 m above the starting point complete all as directed. |
| 27 | M & L Hard core of brokenbricks deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed. |
| 28 | M &L for providing 75mm thick PCC 1:4:8 type D2 as in sub base for tiles or floor finishes etc, all as specified |
| 29 | M&L Virified tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor etc , all as specified. |
| 30 | All as per item No 29 here-in-before but in skirting/dado or verticle surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 and pointed in white or coloured cement to match complete all as specified. |
| 31 | M&L Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. |
| 32 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) in , plinth protection , including finishing the surface even and smooth using extra cement.complete all as specified and directed. |
| 33 | S&F three track aluminium powder coated sliding window with three sliding shutter, the size of outer frame three track 100 x 37 x 1.50mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37 x 18 x 1.2mm) and glazing with 5 mm thick transparency glass of poly carbone including all around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with including all necessary fittings complete all as specified and directed. |
| 34 | M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work. complete all as specified and directed.conforming to Fe.290.Gde-E-165 |
| 35 | S&F pressed steel frame for doors size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 36 | M&L providing cement concrete (1:3:6) type C-1 for filling in pressed steel frames and other similar items etc complete.complete all as specified and directed. |
| 37 | S&F 30mm thick Flush shutters with/without peepholes, solid core construction, with block board core and plywood face panels, commercial type on both sides, both face are covered with decorative face veneer with lipping/frame to match and complete all as specified. |
| 38 | S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section.complete all as specified and directed. |
| 39 | S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.complete all as specified and directed. |
| 40 | S & F 150 mm long Aluminium handles, cast type, anodised.complete all as specified and directed. |
| 41 | Supply & fixing butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed. |
| 42 | S&F 150 mm floor door stopper of aluminium alloy body and tonuge ,anodised, with hard drawn steel spring fixed in floor.complete all as specified and directed. |
| 43 | M & L PCC (1:2:4) type-B0 using (12.5 mm graded stone aggregate) for benching coping etc incl necessary form work.complete all as specified and directed. |
| 44 | S&F in repair, 20mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 45 | M&L for applying a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm over a coat of bitumen primer @ 0.30 Kg/ sqm including cleaning surfaces and apply APP based polymeric membrane minimum weighing 3.60Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with side lap not less 100mm and end lap not less than 150mm incl apply a tack coat of industrial bitumen complete all specified.etc complete all as specified |
| 46 | M&L painting, preparing new surface steel, priming with Red oxide, two coat of Synthetic enamel paint complete.complete all as specified and directed. |
| 47 | M & L point wiring for Modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FR-LSH) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) incl modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed |
| 48 | All as per item No 47 herein before butOne light/One fan/one bell point controlled by one modular switch.complete all as specified and directed. |
| 49 | All as per item No 47 herein before but One modular socket outlet 3 pin 6 amps controlled by one switch on same board.complete all as specified and directed. |
| 50 | All as per item No 47 herein before but One modular socket outlet 3 pin 6 amps controlled by one switch on independent board.complete all as specified and directed. |
| 51 | All as per item No 47 herein before but wiring with 2.5 sqmm copper wire (FRLSH) PVC and 2.5 sqmm earth wire for modular socket outlet 5 pin 16 amps on independent board. complete all as specified and directed. |
| 52 | Supply and fix modular type switch single pole, one way 6 Amp complete all as specified and directed. |
| 53 | Supply and fix socket out let multi 5 pin, 6 Amps, modular type complete all as specified and directed. |
| 54 | Supply and fix switch modular type single pole, one way 16 Amp complete all as specified and directed. |
| 55 | Supply and fix socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed. |
| 56 | Supply and fixing LED lights fitting 1x 20W (warm/milky white as required on site), 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and life of tube light not less than 50,000 hours.complete all as specified and directed. |
| 57 | S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed. |
| 58 | S & F LED light fitting 1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with complete all as specified and directed. |
| 59 | Supply & Fixing sheet metal enclosure for DBs(double door type) single pole and neutral 8 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 60 | Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . |
| 61 | Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed . |
| 62 | M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross section area 16 Sqmm 2 core laid in trenches or passing through pipes/ducts and incl the disturbence surface of road making good with using PCC complete all as specified and directed. Including taking down old LT U/G Cable from trenches/protection pipe etc complete. complete all as specified and directed. |
| 63 | M & L for Excavation in trenches not exceeding 1.5 mtr wide, depth exceeding 1.5 mtr and getting out in hard/dense soil complete all as specified and directed by Engineer-in-charge.complete all as specified and directed. |
| 64 | M&L for dry clean sand filling in trenches below and around under ground cable cushioning complete all as specified and directed.Note :- Thickness of sand cushioning shall be measured after punning. |
| 65 | Supply and fix unreinforced PCC cable cover class LV type I of size 0.25x0.15x0.04mm.complete all as specified and directed. |
| 66 | Supply and Fixing steel tube Light grade galvanised 50 mm bore with all fittings for protection of UG cable under road/culvert and fixing on wall with saddle, screw complete all as specified and directed. |
| 67 | M&L for Earthing complete with galvanized sheet earth plate electrodes 600x600x6.3 mm thick buried directly in ground (earth pit not less than 2. 25mtr deep below ground level) with top edge of plat not less than 1.5 mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts , check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI Strip from earth electrodepanel box, supplying and laying charcoal dust, common salt, PCC 1:2:4 type B1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced with 6 mm dia TMT bars @ 75mm C/C both ways with MS handle 12mm dia, PGI funnel and wire mesh,20 mm dia GI pipe light grade for watering and connected to panel box and testing complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender