Tender For special Repair To Bldg No P-11, P-16, P-26, P-7, T-33H, T-132 And Provn Of 03 X Septic Tank And Soakage Pit At R Ur Under Ge 969 Ews.
Tender Value
33.35 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
13 days left
EMD
66700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To Bldg No P-11, P-16, P-26, P-7, T-33H, T-132 And Provn Of 03 X Septic Tank And Soakage Pit At R Ur Under Ge 969 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster, on brick or stone walls,/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc.any description, complete all as specified and as directed. |
| 2 | M & L Rendering 10 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 3 | M & L Rendering 15 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 4 | Demolition of un reinforced concrete of any description and in any position not otherwise specifically provided, complete all as specified and as directed. |
| 5 | M & L for broken stone or boulders hardcore of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface, complete all as specified and as directed. |
| 6 | M & L for 75 mm thick in PCC 1:3:6 type-C2 as in plinth protection surface finished even and smooth without using extra cement, complete all as specified and as directed. |
| 7 | Forming of construction joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' , complete all as specified and as directed. |
| 8 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed. |
| 9 | M & L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4), complete all as specified and as directed. |
| 10 | M & L for non skid coloured printed ceramic tile 8 to 10 mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 11 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as reqd to facilitate demolition), complete all as specified and as directed. |
| 12 | Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering , complete all as specified and as directed. |
| 13 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed. |
| 14 | S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed. |
| 15 | Taking down chowkats with shutters (without taking off shutters from the frame) area n exc 1.5 Sqm each and offered as credit, complete all as specified and as directed. |
| 16 | S & F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-II , 2010 as specified, complete all as specified and as directed. |
| 17 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item, complete all as specified and as directed. |
| 18 | S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed. |
| 19 | S&F Aluminium handles 100 mm , cast type,anodised, complete all as specified and as directed. |
| 20 | S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. |
| 21 | S&F in repairs Vitreous China urinals, half stall type with PVC waste/ flush pipes, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and Union for discharge pipe etc, complete all as specified and as directed. |
| 22 | S&F in repair vitreous china squatting pan \\"Orissa\\" pattern size 580mmx440mm white with integral foot rests including 10ltrs capacity PVC flushing cistern (low levl with inlet, ball valve float), brackets, flush pipe of polyethylene of low density PVC 32mm dia for low level cistern, complete all as specified and as directed. |
| 23 | S&F in repairs vitreous china wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cober incl provision of concrete/ white cementing and P or S trap, complete all as specified and as directed. |
| 24 | S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and as directed. |
| 25 | S&F in repairs PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and as directed. |
| 26 | S&F in repairs Vitreous China wash Basin (flat back or angle back type) , of size 550x400mm including brackets, PTMT waste coupling 32mm, and PVC 32mm dia waste pipe including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified and directed |
| 27 | S&F 15mm in repairs dia Pillar taps cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe, complete all as specified and as directed. |
| 28 | S&F in repair tubular towel rail alumunium anodised , 20mm dia, D type 60 cm long between flanges, complete all as specified and as directed. |
| 29 | S&F in repairs Soap dish vitreous china white of size 160*160*90mm fixed to wall, complete all as specified and as directed. |
| 30 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, complete all as specified and as directed. |
| 31 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 32 | S&F in repairs bevelled edge mirror of size 600X450mm of selected quality glass mounted on 6mm thick AC building boards or on commercial plywood with aluminium beading alround and fixed to wooden plugs with CP brass screws, fixed in repairs, complete all as specified and as directed. |
| 33 | S&F in repairs 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed , complete all as specified and as directed. |
| 34 | S&F in repairs15mm bore Angle valve, fancy type chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe, complete all as specified and as directed. |
| 35 | S & F in repairs soap dish chromium plated, fixed to plugs with chromium plated brass screws, complete all as specified and directed. |
| 36 | M & L CP soap tray fixed in wall, complete all as specified and as directed. |
| 37 | Taking down GI water tubing and connections and taken in to schedule of credit for 15 mm bore, complete all as specified and as directed. |
| 38 | S&F tubing, medium grade, galvanised, 15 mm bore with all fittings; fixed to walls and ceilings or laid in floors, complete all as specified and as directed. |
| 39 | S & F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed. |
| 40 | S & F 110mm bore PVC (SWR) bend, plain including jointing with solvent cement, complete all as specified and as directed. |
| 41 | S & F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement, complete all as specified and as directed. |
| 42 | S&F 100mm bore PVC (SWR) 'T 'any radius, complete all as specified and as directed. |
| 43 | Cutting into existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) smooth finished and reforming benching as required for 100mm dia pipe, complete all as specified and as directed. |
| 44 | S & F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed. |
| 45 | S & F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, complete all as specified and as directed. |
| 46 | S&F PVC (SWR) bends 75mm bore , complete all as specified and as directed. |
| 47 | S&F PVC (SWR) \\"T\\" 75mm bore , complete all as specified and as directed. |
| 48 | M&L for preparation of new or previously untreated surface and applying two or more coat of the Fire resistant paint over surfaces of any description wood over a coat of primer, complete all as specified and as directed. |
| 49 | Taking down chowkhats or frames with shutters and removing to store shutters of any description n.exc 1.5 sq. m each, complete all as specified and as directed. |
| 50 | S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (including channel for lover glass), complete all as specified and as directed. |
| 51 | S&F 3mm thick figured glass pin headed type and glazing with oil putty in squares not exc 0.5 sqm in each pane, complete all as specified and as directed. |
| 52 | M&L for preparation of old wall surfaces including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying TWO coat of white wash including cleaning the floor/joinery surfaces, glass panes, complete all as specified and as directed. |
| 53 | Material & Labour for complete removal from old existing surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance asper IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over old surfaces complete all as specified and as directed. |
| 54 | Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed. |
| 55 | M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm screed bed in CM 1 : 4 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing etc, complete all as specified and as directed. |
| 56 | Demolition of RCC of any description and in position, complete all as specified and as directed. |
| 57 | M&L 8mm dia TMT bar cut to length bend to shape required for stirrups incl cranking, hooking and binding with steel wire, complete all as specified and as directed. |
| 58 | Demolition of brick work or stone / boulder masonry built in CM including all quoins arches, pillars, complete all as specified and as directed. |
| 59 | Brick work sub class 'B' brick, straight or curved on plan exceeding 6m mean radius built in CM 1:4, complete all as specified and as directed. |
| 60 | M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:6, complete all as specified and as directed. |
| 61 | Dismantling of boarding any description fixed in any position with nails, complete all as specified and as directed. |
| 62 | M&L, for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps, complete all as specified and as directed. |
| 63 | Fixing only for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps, complete all as specified and as directed. |
| 64 | S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched, complete all as specified and as directed. |
| 65 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/ new surfaces, complete all as specified and as directed. |
| 66 | Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc, complete all as specified and as directed. |
| 67 | M&L 4mm thick Pine wood veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling, complete all as specified and as directed. |
| 68 | M&L for 4 mm thick Pine wood Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work on wall, complete all as specified and as directed. |
| 69 | S&F second class hardwood plain fillets square, rectangular in section not exc 3 Sqcm, complete all as specified and as directed. |
| 70 | M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc, complete all as specified and as directed. |
| 71 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM-1:3, complete all as specified and as directed. |
| 72 | M&L for chequerd cement concrete tiles 20cmx20cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors including screed bed 15mm thick in CM 1:4, complete all as specified and as directed. |
| 73 | S&F in repair Rotational moulded polythene water storage tanks (Cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of capacity 500 ltr incl 20mm brass ball valves high pressure with polythene float nut flynut complete for iron pipe or barss ferrule and fixed , complete all as specified and as directed. |
| 74 | M & L Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floor etc, Incl screed bed 15 mm thick in CM (1:6), complete all as specified and as directed. |
| 75 | Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, complete all as specified and as directed. |
| 76 | S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm, complete all as specified and as directed. |
| 77 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), complete all as specified and as directed. |
| 78 | S&F Powder coated aluminium sliding windows frame with movable shutter and aluminium grill ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks.(ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing(vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed. |
| 79 | S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make)(g) Making good of wall surface to match with existing surface complete. |
| 80 | Perparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer. |
| 81 | Material & Labour for applying Two or more coats of fire resisting paint over Surfaces of any description wood, steel, iron, concrete, brick, stone, etc., exceeding 10cm in width or girth over and including priming coat over old/ new surfaces. |
| 82 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil, complete all as specified and as directed. |
| 83 | Excavating over areas, not exc 1.5 m deep n exc 1.50 m depth and getting out in soft/loose soil, complete all as specified and as directed. |
| 84 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in fdn of manholes etc complete all as specified and as directed. |
| 85 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in surface chanels and drains of manholes etc, complete all as specified and as directed. |
| 86 | 150 mm bore (internal dia) Reinforced Concrete pipes, class NP-3 laid in trenches and jointed on concrete bed to required slope jointed and plasted complete all as specified (concrete bed cell be measure and paid separately), complete all as specified and as directed. |
| 87 | M&L PCC 1:3:6 type D-2 using 40 mm crushed graded stone agg as in bed to drain pipes,150 mm bore including packing under haunching against the sides of pipe after they are laid and tested, complete all as specified and as directed. |
| 88 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate in bed plates bends coping benching etc including slighting mouled or chamferred edges, complete all as specified and as directed. |
| 89 | Extra for forming fair finished to drain or channels up to 30 cm inner girth in cement concrete using extra cement including necessary forms/moulds etc, complete all as specified and as directed. |
| 90 | M&L for 15 mm thick cement plaster in CM 1:4 on brick or concrete surfaces mixed with water proofing compound as per manutrs instructions surfaces finished even and smooth without using extra cement, complete all as specified and as directed.Note : WPC shall be measured and paid separately) |
| 91 | Supply only water proofing compound, complete all as specified and as directed. |
| 92 | Pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in manholes cover set in CM 1:6 including necessary form work complete all as specified and shown on drawings (Reinforcement and MS handle shall be measured paid for separately) |
| 93 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed. |
| 94 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed. |
| 95 | Removing surplus & soil to a distance not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point, complete all as specified and as directed. |
| 96 | Construction of On site LLDPE septic tank media designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc, complete for 20 users, complete all as specified and as directed. |
| 97 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 mtr dia X 3.0 mtr effective depth, complete all as specified and as directed. |
| 98 | Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc |
| 99 | M&L for point wiring in PVC casing caping/ Concealed or Conduit with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including PVC board and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor.all as specified and directed Engr-in -Charge. |
| 100 | (a) One light point/fan point/Ex fan point/bell point controlled by one 5 Amps switch one way |
| 101 | (b) One 3 pin 5 Amp switch socket outlet on same board with accessories |
| 102 | (c) One 3 pin 5 Amp switch socket outlet on independent with accessories |
| 103 | M&L for point wiring using proper colour coding in non-metallic PVC casing & caping/ concealed in wall/ceiling/floor/roof etc including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including PVC board/ PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor.all as specified and directed Engr-in -Charge. |
| 104 | S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and as directed |
| 105 | S&F switch piano Flush type, single pole, 15 amp 240 volts, complete all as specified and as directed |
| 106 | S&F Socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete with gang box all as specified and as directed |
| 107 | S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed. |
| 108 | S&F Switch Socket combination 2 in 1, 3 pin, 6 Amps, flush type, complete all as specified and as directed. |
| 109 | S&F ceiling rose surface 2/3 terminals, complete all as specified and as directed |
| 110 | S&F in repairs Distribution Board, SPN 8 Way, Double door, complete all as specified and as directed |
| 111 | S&F in repairs Distribution Board, SPN 4 Way, Double door complete all as specified and as directed |
| 112 | S & F in repairs MCB,DP 40 Amps 240 Volts B curve, complete all as specified and as directed |
| 113 | S & F MCB Single pole 6-32A Amps 240 Volts B Curve,complete all as specified and as directed. |
| 114 | S&F LED light fitting 1x10 bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size,complete all as specified and as directed. |
| 115 | M&L for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in sevice connections suspended by insulating hangers not more than 1 mtr apart including 4mm suspension wire, with two single core cables flat or circular 16 sqmm 2 core,complete all as specified and as directed. |
| 116 | Supply and fixing 1x20 watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting ,complete all as specified and as directed. |
| 117 | S&F LED Lamp 9 W 'T' type,complete all as specified and as directed. |
| 118 | Supply and fixing angular holder, PVC body complete with wiring etc,complete all as specified and as directed. |
| 119 | M&L for Earthing complete with galvanised steel earth plate electrode 60×60cm.x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion,complete all as specified and as directed. |
| 120 | S&F electric water heater, storage type outer body Engineering Thermoplastic plastic with puf injected type insulation , Steel tank with glass lined coating inner tank and heating element (copper tube) upto 2 KW capacity 25 litre, 230 volts AC single phase BEE 5 Star rated complete with all accessories such as FR Grade 3 core PVC Cord ,multifunctional safety valve, 8'' Nut & bolt, thermostate, connection piece etc,complete all as specified and as directed. |
| 121 | Supply and fixing in repair Body plastic complete with louvers shutter Ventilating Exhaust fan 250 mm sweep 230 volts, 50Hz,1200 rpm AC connecting up including provision of cable from ceiling rose/ connector to fan,complete all as specified and as directed. |
| 122 | Supply and fixing in repair Body Steel complete with louvers shutter Ventilating Exhaust fan 450 mm sweep 230 volts, 50Hz,1200 rpm AC connecting up including provision of cable from ceiling rose/ connector to fan,complete all as specified and as directed. |
| 123 | S & F modular type switch 6 Amps, one way one module, complete all as specified and as directed. |
| 124 | S & F Modular Type Socket outlet, 6 Amps, 2/3 pin combined 2 module, complete all as specified and as directed. |
| 125 | S & F Modular Type Socket outlet, 6/16 Amps,combined 2 module, complete all as specified and as directed. |
| 126 | Material and labour for white cover with frame suitable for accommodating 01 Nos module switch/socket etc, complete all as specified and as directed. |
| 127 | Material and labour for white cover with frame suitable for accommodating 02 Nos module switch/socket etc, complete all as specified and as directed. |
| 128 | Material and labour for white cover with frame suitable for accommodating 03 Nos module switch/socket etc, complete all as specified and as directed. |
| 129 | Material and labour for white cover with frame suitable for accommodating 4 Nos module switch/socket etc, complete all as specified and as directed. |
| 130 | Material and labour for white cover with frame suitable for accommodating 6 Nos module switch/socket etc, complete all as specified and as directed. |
| 131 | Material and labour for white cover with frame suitable for accommodating 8 Nos module switch/socket etc, complete all as specified and as directed. |
| 132 | M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM |
| 133 | Supply and fix SMD LED panel recess/surface 12/16 watt Round/square type ' LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ, complete all as specified and as directed. |
| 134 | Note:- Schedule of credit Rs 1,05,640.28 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender