Tender For Replacement Of Bare Conductor By Lt Ab Cable In 11 Kv R Ur Road Feeder Emanating From 33/11 Kv S/S G.I.S. Circle Under Edd, Rudrapur-I Under The Head Of Capital (S.I.).( Rates Should Be Quoted Without Gst) (Gst Will Paid Extra)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
23 Oct 2026
0 days left
EMD
85000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udam Singh Nagar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Bare Conductor By Lt Ab Cable In 11 Kv R Ur Road Feeder Emanating From 33/11 Kv S/S G.I.S. Circle Under Edd, Rudrapur-I Under The Head Of Capital (S.I.).( Rates Should Be Quoted Without Gst) (Gst Will Paid Extra)
BOQ
| Sl. No. | Item Description |
| 1 | Annexure-A (LABOUR CHARGES) |
| 2 | Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrode with the help of G.I. wire as per construction manual. |
| 3 | Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESPO schedule and local approved drawing. |
| 4 | Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work |
| 5 | Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line |
| 6 | Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual. |
| 7 | Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including proper dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work |
| 8 | Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual. |
| 9 | Dismantling of existing LT line 1P 2W including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel) |
| 10 | Dismantling of existing LT line 2P 3W including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel) |
| 11 | Dismantling of existing LT line 3P 4W including disc fitting, Insulator, clamps, Nut & Bolts and consumer connections and Street light connections etc. including rolling of conductor and cartage back from site to JE store(ACSR Weasel) |
| 12 | Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 0-20 Km) |
| 13 | Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends(distance 0-20 Km) |
| 14 | Headload cartage of PCC Pole from road to site (distance 0-1 Km) |
| 15 | Laying/Erection & Commissioning of LT AB Cable of size 3x120+1x95+1x16 Sq.MM |
| 16 | Road Cutting with the help of JCB/Pokland and repairing of road after work as per specification of PWD. |
| 17 | Installation of LT Distribution Box 3 Phase for LT AB Cable. |
| 18 | Disconnection & Reconnection of Consumer single phase. |
| 19 | Disconnection & Reconnection of Consumer three phase. |
| 20 | Straightening of Tilted STP Poles as per Direction of Engineer in Charge. |
| 21 | Fixing, tightening and renozzeling with pole and existing stay set on required tension |
| 22 | Back Carriage of Scrap Material. |
| 23 | Annexure-B (SUPPLY ITEMS)(As per UPCL Norms) |
| 24 | Supply of Nut & Bolt off size |
| 25 | Supply of Stay Clamp with N&B for PCC Pole 8.5 Mtr |
| 26 | Supply of Suspension Clamp with Eye Hook. |
| 27 | Supply of MS Clamp with N&B for Distribution work. |
| 28 | Supply of MS Clamp with N&B for Dead End Clamp |
| 29 | Supply of Dead End Clamp with I Hook. |
| 30 | Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 95 Sqmm TYCO/RPG/3M Make. |
| 31 | Supply of LT Bare N.Connector PG. Clamp 95-25 Sq.mm |
| 32 | Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 120 Sqmm TYCO/RPG/3M Make. |
| 33 | Supply of MS Clamp with N&B for Suspension Clamp. |
| 34 | Supply of LT Bare N.Connector PG. Clamp for L-L 95-95 Sq.mm |
| 35 | Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 35 Sqmm TYCO/RPG/3M Make. |
| 36 | Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer (Sintex/RMC make or other ISO reputed company) with Panel Lock with key) (As per drawing attached) |
| 37 | Supply of Al. Crimping type Lugs 35 SQ.MM Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender