Tender For Provision Of Vehicle Washing Point Alongwith Shed For Mt At Zainakote Under Age (I) Cif (K)
Tender Value
4.63 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
7 days left
EMD
9300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Vehicle Washing Point Alongwith Shed For Mt At Zainakote Under Age (I) Cif (K)
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out hard/dense soil complete all as specified and directed by Engr -in-Charge. |
| 2 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, hard/dense soil, returning, filing in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface. |
| 3 | M&L for plain cement concrete 1:3:6, type C-2, using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | S&F Steel work as in tubular section for post, purlins etc including special shaped washer, angle cleat, holdfast, gusset plate etc., complete using ERW or induction butt welded tubes conforming to I.S.1161- 1979 grade St.-240 cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (including rivet or nut and bolts) providing and fitting angle cleats Gusset plates etc also for welding plumbing, truing up and fixing complete as directed by Engr-in-Charge. |
| 5 | S&F Fe 410-W (Gde-E-250) quality-A Roof trusses (framed), trussed purlins, crane gantries, rails and fasteninngs and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., complete as directed by Engr-in-Charge. |
| 6 | S&F prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified all as specified and directed. |
| 7 | M&L for applying two coats of synthetic enamel paint on new steel surfaces of any description, over 10 cm in width or girth over a coat of red oxide primer complete all as specified and directed by Engr -in-Charge. |
| 8 | M&L for 150mm thick hardcore of broken stone or boulders gauge exc 63mm but not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick watered and rolled/rammed tot a true surface complete all as specified. |
| 9 | M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6, complete all as specified and as directed |
| 10 | M&L for 100mm thick plain cement concrete 1:2:4, type C-1, using 20mm graded crushed stone aggregate including necessary formwork as in flooring, complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | M&L for removing excavated soil to a distance exc.250m but n. exc. 500m and depositing in low lying area, complete all as specified and directed. |
| 12 | M&L for reinforced cement concrete (Nominal mix) 1:2:4 type B-0 using 12.5mm graded crushed stone aggragte as in tie beams, gable beams, cantilevers, bressummers, lintels over 1.5m span etc., complete all as specified as directed by the Engineer-in-Charge. |
| 13 | M&L for TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for rendering 15mm thick on walls in cement mortar 1:4 on brick work or concrete surfaces, and finishing the surface even and smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistance primer paint complete all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender