Tender For Provn Of Aluminium Windows In Certain Md Accn And Provn Of Sliding Glass Window With Aluminium Frame At Acute Med Ward-I At Chaf Banglaore
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Oct 2026
15 days left
EMD
77736
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Aluminium Windows In Certain Md Accn And Provn Of Sliding Glass Window With Aluminium Frame At Acute Med Ward-I At Chaf Banglaore
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames not exc 1.5 sqm each (without taking off shutters from the frames) and stacking at site where directed complete all as specified and as directed by Engr-in-charge. |
| 2 | Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 sqm each (without taking off shutters from the frames) and stacking at site where directed complete all as specified and as directed by Engr-in-charge. |
| 3 | Material and labour for powder coated aluminium sliding windows of three tracks outer frame top, side sections, bottom frame (track) with guide track of size 92.5x31x1.50mm with sliding window shutters two nos with glass and one no with wire mesh (total 3 Nos shutter) frame top and side bottom section with wheel track and inner locking section of size 40x18x1.5mm including glass 5mm thick and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm etc., complete all as specified and as directed by Engr-in-charge. (Item 3 of Job A + item 7 of Job B) |
| 4 | Supply and fix for anodised aluminium grill (anodised transparent or dry required shed according to IS:1868 with minimum anodic coating of grade AC15) of approved design /pattern, with approved standard section and fixed to the existing window frame with C.P. brass /stainless steel screws @ 200mm centre to centre, including cutting to grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and as directed by Engr-in-charge. |
| 5 | Supply and fix for aluminium frame work powder coating of any colour (thickness of powder coating not less than 50 micron) as in doors/ windows /partitions, cleats, fixing /sliding type of rulars and other necessary aluminium sections using standard aluminium anodised (15 micron) extruded section including provision of glazing clips (double glazing) hinges, handle etc., excluding sheet glass of 5.5mm thick etc., including taking down of existing partitions complete all as specified and as directed by Engr-in-charge.Note: Glass will be measured and paid separately under respective item. |
| 6 | Supply and fix for 5.5mm thick glass selected quality, fixed to aluminium frame work as in panels of windows shutters /door shutters or cubical partition or wooden framed works as in racks /shelves including necessary fixing cleats etc., complete all as specified and as directed by Engr-in-charge. |
| 7 | Supply and fix for stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed by Engr-in-charge. |
| 8 | Supply and fix for 5.5mm thick frosted or obscured glass selected quality, fixed to aluminium frame work as in panels of windows shutters /door shutters or cubical partition or wooden framed works as in racks /shelves including necessary fixing cleats etc., complete all as specified and as directed by Engr-in-charge. |
| 9 | Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including the like laid over cement mortar 1:4, 20mm thick set and jointed in neat cement slurry and pointed in white cement with pigment to match including grinding and polishing complete all as specified and as directed by Engr-in-charge. |
| 10 | Material and labour for rounding to edges of granite /stone slab such as in steps, cooking platform and other similar situations etc., complete all as specified and as directed by Engr-in-charge. |
| 11 | Taking down cement or cement lime plaster any description on brick or stone walls, RCC slab, ceiling etc., including raking out joints, hacking for key, scrubbing down with water, etc., including necessary scaffolding complete all as specified and as directed by Engr-in-charge. (Item 11 of Job A + item 1 of Job B) |
| 12 | Material and labour for rendering 15mm thick on fair faces of brick works/ block works or concrete surfaces cement plaster 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 13 | Material and labour for preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of 1mm thick wall care putty complete all as specified and as directed by Engr-in-charge. |
| 14 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds, moss and efflorescent salts and treating oily and greasy spots and filling holes and cracks with suitable material like white cement or plaster of paris and applying one coat distemper oil emulsion, white or tinted complete all as specified and as directed by Engr-in-charge. |
| 15 | Material and labour for complete removal of existing treatment on walls and applying 1mm thick wall care putty (birla putty) and preparation of surface making smooth and applying primer for base coat and applying two coats of oil bound distemper complete all as specified and as directed by Engr-in-charge. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed by Engr-in-charge.Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost. |
| 17 | Material and labour for non skid ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed in CM 1:4, 15mm thick complete all as specified and as directed by Engr-in-charge. |
| 18 | Material and labour for glazed ceramic coloured tiles 450x350x7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 10mm thick screed bed or bedding in CM 1:3 complete all as specified and as directed by Engr-in-charge. |
| 19 | Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed by Engr-in-charge. |
| 20 | Material and labour for preparation of new plastered surfaces of wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint complete all as specified and as directed by Engr-in-charge. |
| 21 | Material and labour for applying two coats of distemper oil emulsion to old treated surfaces of wall including complete removal of existing tratment and preparation of old surface of walls including by washing down, rubbing down and stopping of distempered surface complete all as specified and as directed by Engr-in-charge. |
| 22 | Material and labour for applying 2mm thick wall care putty on wall including preparation old /new surfaces plastered or unplastered surfaces complete all as specified and as directed by Engr-in-charge. |
| 23 | Material and labour for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and as directed by Engr-in-charge. |
| 24 | Supply and fix for powder coated aluminium frame work for grills deco-grill Model DG-104(10mm) making shape and riveted with rivets and fixed with suitable channel complete necessary fixing arrangements etc., complete all as specified and as directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender