Tender For Provn Of Toilet Block At Chandil Company Operating Base (Cob) Of 2Nd repair renovation Battalion Under Age (I) Cif (K)
Tender Value
10 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Toilet Block At Chandil Company Operating Base (Cob) Of 2Nd repair renovation Battalion Under Age (I) Cif (K)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 29-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.50m wide and n.exc 1.5m deep for foundation etc. for shafts, wells, cesspits, manholes, pier holes and for laying water main pipe, electric cables etc not exceeding 10sqm on plan and getting out in any type of soil and forming bottom surfaces to required gradient, complete all as specified and directed. |
| 2 | M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded aggregate) in foundation filling & mass concrete, complete all as specified and directed. |
| 3 | M&L for brick work with sub class 'B' bricks built in CM (1:4) straight or curved on plan and exc 6 m mean radius with old size bricks, complete all as specified. |
| 4 | M&L for brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan and exc 6 m mean radius with old size bricks, complete all as specified. |
| 5 | M&L Brickwork with sub class 'B' bricks, straight or curved on plan in any radius of half brick thick, built in CM 1:4 complete. |
| 6 | Use & Waste for formwork sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter , for rough finished surface complete all as specified. |
| 7 | M&L for RCC (nominal Mix) 1:2:4 Type B1 (20mm graded aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 8 | M&L for RCC (nominal Mix) 1:2:4 Type B1 (20mm graded aggregates), Beams, Cantilivers, bressummers, lintel over 1.5 m span. |
| 9 | S&F MS TMT bars 8mm to 10mm dia and over cut to length bent to shape required incl. cranking bending spirally for hooking and binding with and incl. MS wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 10 | Ditto all as per item 9.00 above but 6 to 8mm dia as in stirrups, spacers and binders |
| 11 | M & L for filling under floors with available earth incl spreading and levelling in layers not exceeding 25cm thick, well ramming and watering as required |
| 12 | M&L for hard core of gauge n.exc 63mm deposited spread & levelled in layers n.exc 15cm thick watered and rammed to true surface with broken stones or boulders. |
| 13 | M & L 100 mm thick plain cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) including necessary form work as in flooring, complete all as specified. |
| 14 | M & L 50 mm thick plain cement concrete type B1, 1:2:4 (using 20mm graded aggregate) including necessary form work as in flooring, complete all as specified. |
| 15 | M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding in cement mortar 1:4. |
| 16 | M&L for Glazed ceramic colored tiles (450x350)x7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as on vertical surfaces of wall incling backing coat 10mm thick cement mortar 1:4. complete all as specified. |
| 17 | Supply and fixing Anodised aluminium snap grid (605 x 605mm) frame work for false ceiling all as specified. and hangers 6mm dia GI upto 1200 mm length adjusting evel fixed to roof slabs by means of ceiling cleatsmade of GI flat 40 x 3 mm 60mm long and expansion hold fasteners 12.5mm dia 40mm long including S&F 6mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed. |
| 18 | Returning, filling in trenches including spreading levelling, watering well, ramming in layers n.exc 25cm in soft/loose soil (from available soil) |
| 19 | Removal of excavated material exc 250m n.exc 500m and depositing where directed at a level n.exc 1.5m above the starting point. |
| 20 | Supply and fix 4mm thick sheet glass of selected quality in square exc 0.5 sq. m in each pane fixed to aluminium frame complete all as specified and as directed |
| 21 | M&L for plain solid straight chowkat and frames wrought framed received on the solid rounded or chamfered put together with glue pinned at joint in second class soft wood. |
| 22 | S&F 35 mm thick 2nd class soft wood plain framed paneled shutters (any no. of panels ) with panels of timber flat on both sides (feathered edge) or veneered particle board with commercial face venners supplied and fitted to chowkats. |
| 23 | S&F 30mm thick 2nd class soft wood for Glazed skeleton shutters for window open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. sizes of members of shuttered as specified in SSR Part- I section -8 clause 8.23 (b). |
| 24 | S&F solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified. |
| 25 | S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour pvc sheet to be fitted in the M.S. frame welded/sealed to the stiles & rail with suitable pvc sheet beading, and joined together with solvent cement in the frame complete all as specified. |
| 26 | S&F butt hinges med weight 150mm size medium weight cold rolled mild steel |
| 27 | S&F butt hinges med weight 100mm size medium weight cold rolled mild steel |
| 28 | S&F aluminium handles fabricated type anodised 150 mm size |
| 29 | S&F 300 mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 30 | S&F Alumnium anodised barrel tower bolts, stove enamelled black, with bright bolt and fixed of extruded section 100mm length of bolt, |
| 31 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls, finished even & fair w/o using extra cement. |
| 32 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finished even& smooth w/o using extra cement. |
| 33 | Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil bound distemper over white wash and 3mm thick putty complete all as specified. |
| 34 | M&L for preparing new plastered or unplastered surfaces of walls & applying two coats of cement base paint on walls over a coat of primer complete all as specified. |
| 35 | S&F Fe 410-W (Gde-E-250) quality-A Roof trusses ( framed), trused purlins , crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 36 | S& F rolled mild steel in section as in purlins, rafters, and the like with angle cleats and connecting plates complete all as specified and as directed by EIC.confirming to Fe-410W (Gde E-250 quality A) |
| 37 | S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self taping screws as specified. |
| 38 | S & F Pre-painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/clading to wall/eaves board, fixed with self taping screws as specified. |
| 39 | S&F 1mm thick plain, black, mild steel sheeting as in eaves boarding etc complete fixed with welded or soldered joints |
| 40 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified. |
| 41 | M&L for PCC (1:3:6) type C2 use in plinth protection 50mm thick finished even and smooth without using extra cement. |
| 42 | S & F vitreous china wash down water closet pan (Orissa Pattern) size 580 x 440mm white with integral foot rests with CI 'P' or 'S' trap and fixed in lime concreted (1 cement,2 sand and 5 aggregate), 150 mm thick all round and finishing just below level of rim of pan to receive the floor finishing and provision of PVC 10 ltr symphonic action type flushing cistern including flush pipe of PVC and connected to WC pan fixed in repair all as specified and directed. |
| 43 | S&F 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia complete all as specified and directed. |
| 44 | S&F for Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete all as specified and directed. |
| 45 | S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches 110 mm bore pipe. |
| 46 | S&F PVC (SWR) pipe single socketed in any length with rubber ring joints laid in floor or trenches 75mm bore pipe. |
| 47 | S&F PVC (SWR) branches pieces single (equal or unequal ) of 110 mm bore. |
| 48 | S&F PVC (SWR) branches pieces single (equal or unequal ) of 75mm bore pipe. |
| 49 | S&F PVC (SWR) bends (any radius) diminishing pieces or tapers 110mm bore. |
| 50 | S&F PVC (SWR) bends (any radius) diminishing pieces or tapers 75mm bore. |
| 51 | S&F 75mm outlet dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified |
| 52 | S&F vitreous china wash hand basin white flat back of size 550x400 mm ,including brackets complete all as specified and directed. |
| 53 | S&F 32mm dia waste coupling of PTMT (half or full threaded ) minimum weight 45 gms. (Wash Basins) |
| 54 | S&F 32mm dia waste coupling of PTMT (half or full threaded ) minimum weight 45 gms. (Urinals) |
| 55 | S&F 15mm size PVC connection with PTMT nuts length 600mm long. |
| 56 | S&F 15 mm bore CP Bib taps, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule including taking down old one of any pattern and fixed in complete all as specified and directed |
| 57 | S&F 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified . |
| 58 | S&F Brass CP mixer fancy type chromium plated for mixing hot and cold water screwed down for iron pipe . |
| 59 | S&F 15mm dia fancy type pillar taps cast copper alloy with capstan heads chromium plated scewed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as spd. |
| 60 | S&F Soap dish, vitreous China white, approximate size 160x160x90mm |
| 61 | S&F 15mm stop valve, fancy type chromium plated handle,screwed down,high pressure,screwed for iron pipe or brass ferrule and fixed. |
| 62 | S&F bevelled edge mirror of size 600 x 450 mm of selected quality glass mounted on 6mm AC building board or commercial ply wood and plastic framing fixed to plugs with CP brass screws and cup washers |
| 63 | S&F towel rail 600mm long of PTMT fixed with & including chromium plated brass screws and wooden/plastic cleats (min weight 190gms) |
| 64 | S&F swivel shower of PTMT any colour for fixing with 15mm pipe with shower arm 15mmsize, 195 mm long with bend of 45 degree with flange of PTMT any colour, complete all as specified. |
| 65 | Supply and laying steel tubes(GI pipe) medium grade with fittings and fixed complete to walls and ceilings or laid in floors,bore of pipe 15mm, complete all as specified. |
| 66 | Supply and laying steel tubes(GI pipe) medium grade with fittings and fixed complete to walls and ceilings or laid in floors,bore of pipe 20 mm, complete all as specified. |
| 67 | Supply and laying steel tubes(GI pipe) medium grade with fittings and fixed complete to walls and ceilings or laid in floors/under road,bore of pipe 25 mm, complete all as specified. |
| 68 | Cutting chases in brick/stone walls, concrete block or slab walls, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10cm girth complete, all as specified and directed. |
| 69 | S & F rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres includin float wall and 20mm stop valve all as specified and directed by Engineer - in - Charge . |
| 70 | S&F 20mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 71 | S&F 25mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 72 | Material & labour for drilling, cutting and tapping existing GI water pipe for making branch connection of 25mm dia complete all as specified and directed. |
| 73 | M & L for providing lagging on 20 mm pipe all around with 25 mm thick bonded mineral wool preformed 'SNAPON' pipe sections of density 144 Kg/cum with chicken mesh wire netting 25 gauge, 20 mm mesh and covering with POP layer complete all as specified and directed. |
| 74 | M&L rendering 15 mm thick in CM 1:4 by mixing water proofing compound @ 3% by wight of cement on fair faces of brick work including finishing the surface even and smooth without unsing extra cement complete all as specified. |
| 75 | Supply only integral water proofing compound. |
| 76 | M &L for 200mm bore reinforced concrete pipes, class NP2, laid in trenches and jointed in CM 1:1 and tested complete all as spd and directed |
| 77 | M&L for concrete bed for 200mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 78 | Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching, complete all as specified. |
| 79 | Material and labour for cement concrete 1:2:4 Type B-1using 20 mm graded stone aggregate as in copings, weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | M&L for PCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in channels/benching of manhole, drain,laid to shape and slope and surfaces finished even and smooth using extra cement, complete including all form work etc all as specified and directed. |
| 81 | M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks ,drain,covers including all form work and setting in CM 1:4 all as specified and shown on drgs. |
| 82 | Supply and laying, testing and commissioning in replacement of cable XLPE Insulated screened PVC bedded,galvanised steel strip or wire armoured, electric power cable( heavy duty) 1100 Volts grade with stranded aluminuim conductor of size 16 Sqmm 2 core. |
| 83 | Material and labour for old size bricks well burnt as covering to under ground cables class `B` (laid dryflat over the cables with width equal to length of cables all as specified. |
| 84 | S&L dry river sand laid in trenches 5cmm below the cable & 13 cm above the cable in trenches as cable cushioning and covering all as directed. |
| 85 | Supply & fixing GI Pipe light grade of size 40mm for protection of cable for road crossing and supporting to cable and fixing with panel ,wall ,pole complete all as specified |
| 86 | M & L for Cutting through existing road surfaces PCC etc, and making trench of minimum 500mm wide 100cm in depth along the cross section of road for laying of pipes or UG cables, including returning filing in, well ramming & removal of surplus soil to a distance not exc. 50 mtrs & repairs to road surfaces to match with existing specification after laying the pipes/cable etc. all as specified & directed. |
| 87 | M&L for One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) wiring with FRLSH cable PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC conduit with all accessories and earth continuity connected to common earth duly accommodate modular box surface/ flush type with modular white cover plate with frame for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall, match to existing wall surface etc all as directed. |
| 88 | All as per Item Srl No 88 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing). |
| 89 | S&F modular switch piano button flush type, single pole one way 6 amps all as directed. |
| 90 | S&F modular switch piano button flush type, single pole one way 16 amps all as directed. |
| 91 | S&F Modular socket 6A/16A, 2/3 pin combined 2 module all as directed by Engr-in-Charge. |
| 92 | S&F ceiling rose surface bakelite 3 terminals 65 x 50mm complete all as specified and as directed by Engineer-in-Charge. |
| 93 | S & F White cover plate with frame, 3 module |
| 94 | S & F White cover plate with frame, 8 module |
| 95 | S & F Metal flush box 3 module |
| 96 | S & F Metal flush box 8 module. |
| 97 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete as specified and directed. |
| 98 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 3 KW capacity 50 litre, BEE Star rated complete with all accessories such as safety valve, thermostate, NRV, PVC connection piece etc complete as specified and directed. |
| 99 | S&F LED Lights fitting 20 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 100 | S & F of angular type Lamp holder PVC policarbonate type with back plate including Lamp 9 Watt complete all as specified and directed. |
| 101 | S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar complete. |
| 102 | S&F MCB SPN 40 to 63 Amp, type 'C'10KA, 240 Volts. |
| 103 | S&F MCB SP 5 to 32 Amp, 'C'10KA, 240 Volts. |
| 104 | M & L for earthing complete with galvanized steel earth plate electrode 60 x 60cm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt and connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvd iron or steel and thimbles and other end of the earth wire connected to DB and protected by galvd iron or steel pipe light grade 15 mm bore and water pipe 20mm bore GI light grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009. Note : RCC pit cover shall be pre-cast of RCC (1:2:4) type B-I , 80mm thick reinforced with XPM weighting not less than 4 KG/sqmm in lieu of CI cover. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 05, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 3 daysNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender