Tender For Internal & miscellaneous Painting Work In Rcf Priyadarshini Building, Administrative Building And Allied Areas At Chembur , Mumbai - 400 074Notes: 1) Kindly Read All The Pages Of Nit & Special Conditions Before Quoting For This Work. The P
Tender Value
33.65 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
0 days left
EMD
75000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai Suburban → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Internal & miscellaneous Painting Work In Rcf Priyadarshini Building, Administrative Building And Allied Areas At Chembur , Mumbai - 400 074Notes: 1) Kindly Read All The Pages Of Nit & Special Conditions Before Quoting For This Work. The Party Shall Visit The Site Before Quoting To Access The Quantum And Nature Of The Job.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and applying two coats of asian paints plaster coat or equivalent material (In cost and properties) to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom, coir and sand paper if necessary or by any other approved means etc. complete as directed by Engineer-in-charge. |
| 2 | Extra over for providing and applying one coat of Interior Acrylic Wall Primer (Asian Paints Professional Primer WT/ Dulux Interior Sealer A500/ Berger White Primer) after preparing the surface with acrylic wall putty as directed. |
| 3 | Extra over for preparing and finishing plastered wall surfaces / concrete surfaces or wood surfaces in line and level for acrylic distemper/ synthetic enamel paint or plastic emulsion paint by scrapping/removing the old paint if any with wire brush or blades and rubbing, with sand papers as required, filling in cracks in cement mortar 1:3, applying the whole surface with wall putty (Asian Acrylic wall Putty or Professional wall putty as per site requirement/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties), In case of wood work by filling the cracks with premium quality putty or hard glue, rubbing down and even up the surface by any approved means such as sand paper etc. complete as directed by Engineer-in-charge. |
| 4 | Providing and applying two coats of acrylic distemper (Asian Tractor Uno Acrylic Distemper/ Berger Bison Acrylic Distemper/ ICI Acrylic Distemper) of any colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) if necessary by any approved means, etc. complete as directed by Engineer-in-charge. |
| 5 | Providing and applying two coats of synthetic enamel paint / flat oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) of any colour as required as per manufacturers specifications to surfaces specified below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) if necessary by any approved means etc. complete as directed by Engineer-in-charge. For plastered wall surface/Wood work/Steel surface. |
| 6 | Providing and applying two coats of acrylic emulsion paint (Asian Apcolite Premium Emulsion/ Dulux Solitaire A1000 Premium Interior Acrylic Emulsion/ Berger Rangoli Total Care Premium Emulsion) of any colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) by any approved means if required etc. complete as directed by Engineer-in-charge. |
| 7 | Providing and applying two coats of acrylic emulsion paint (Asian Royale Luxury Emulsion/ Dulux Velvet Touch Platinum Glo Ultra Premium Interior Acrylic Emulsion/ Equivalent material in cost and properties) of any colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) by any approved means if required etc. complete as directed by Engineer-in-charge. Item to be used with prior written approval of Engineer-in-Charge for Type-VI area inside bungalows or ARK Guest House or as directed. |
| 8 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint / flat oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) of any colour as required as per manufacturers specifications to surfaces specified below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) if necessary by any approved means etc. complete as directed by Engineer-in-charge. For plastered wall surface/Wood work/Steel surface. |
| 9 | Providing and applying two coats of waterproof cement paint of an approved make and colour as per manufacturers specifications at all locationsand at all heights as directed including preparing surfaces for painting by any approved means, watering, scaffolding, cleaning and curing etc. complete as directed by engineer In-charge. |
| 10 | Providing and applying first single coat of approved primer and two coats of anti-algal, anti-fungal, exterior paint as specified below of an approved make and colour as per manufacturers specifications to any surface, upto any height from ground level and at all locations as directed including preparing surfaces for painting by any approved means, watering, scaffolding, cleaning and curing etc. complete as directed by Engineer-in-charge. By using acrylic based exterior paint. |
| 11 | Scrapping the surface to remove all loosely adhered particles followed by washing with plenty of water using wire brush or pressure washer so as to ensure thorough cleaning. Providing and applying one coat of (Asian Paints SmartCare Bio Block or equivalent in price and properties) water based acrylic pre treatment coat having property of killing and preventing proalgal and fungal growth. Providing and applying one coat of (Asian Paints SmartCare Terrace Tile Primer or equivalentin price and properties) a single component hybrid polymer water based acrylic primer. Providing and applying two coats of (Asian Paints Apex Floor Guard or equivalent in price and properties) a water based crosslinking acrylic emulsion. |
| 12 | Lettering or numbering of 40 mm to 50mm height with paint specified below in any approved colour, style and pattern, including french polishing or synthetic enamel painting the back ground with three coats of approved colour etc. complete as directed by Engineer-in-charge. With synthetic enamel / oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) of any colour/golden colour |
| 13 | Lettering or numbering of 65 mm to 75mm height with synthetic enamel paint in any approved colour, style and pattern, including french polishing or synthetic enamel painting the back ground with three coats of approved colour etc. complete as directed by Engineer-in-charge. With synthetic enamel / oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) other than golden colour |
| 14 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) of an approved colour as per manufacturers specifications s to the W.I / G.I. or M.S. pipes of electric, gas or roof rain water down takes and fittings etc. as specified below, at all height and locations as directed including scaffolding, scraping, cleaning old paint and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. For pipe upto 25mm dia. |
| 15 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) of an approved colour as per manufacturers specifications to the W.I / G.I. or M.S. pipes of electric, gas or roof rain water down takes and fittings etc. as specified below, at all height and locations as directed including scaffolding, scraping, cleaning old paint and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. For pipe upto 50mm dia. |
| 16 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) of an approved colour as per manufacturers specifications to the W.I / G.I. or M.S. pipes of electric, gas or roof rain water down takes and fittings etc. as specified below, at all height and locations as directed including scaffolding, scraping, cleaning old paint and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. For pipe more than 50mm dia. and upto 75mm |
| 17 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) of an approved colour as per manufacturers specifications to the W.I / G.I. or M.S. pipes of electric, gas or roof rain water down takes and fittings etc. as specified below, at all height and locations as directed including scaffolding, scraping, cleaning old paint and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. For pipe more than 75mm dia. and upto 100mm |
| 18 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint (Asian Apcolite Premium Gloss Enamel Paint/ Dulux Gloss Premium Enamel Paint/ Berger Luxol High Gloss Enamel Paint) of an approved colour as per manufacturers specifications to the W.I / G.I. or M.S. pipes of electric, gas or roof rain water down takes and fittings etc. as specified below, at all height and locations as directed including scaffolding, scraping, cleaning old paint and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. For pipe more than 100mm dia. and upto 150mm |
| 19 | Providing and applying first single coat of approved primer and two coats of aluminum paint of an approved make as per manufacturers specifications to any surfaces, at all height and locations as directed including scaffolding, scraping, cleaning and removing old paint if any and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. |
| 20 | Providing and applying first single coat of approved primer and two coats of rubber chlorinated paint of an approved make as per manufacturers specifications to any surfaces, at all height and locations as directed including scaffolding, scraping, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge. |
| 21 | Providing applying Yellow & Black road marking paint grade–I in 3-coats including single coat of approved brand primer after cleaning of old surface of any type with brushing by wire brush as per relevant I. S. codes to satisfaction of Engineer in charge etc. complete. |
| 22 | Providing and applying 12 mm thick internal plaster in cement mortar 1:3 with neeru finish at all heights and locations in one coat for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete. |
| 23 | Providing and applying 20mm thick external sand faced cement plaster with neat cement rendering upto all heights and at all locations in cement mortar proportion specified below in two coats for masonry (exceptstonemasonry) and concrete surfaces including providing waterproofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS2402 of 1963.) In cement mortar 1:3 |
| 24 | Supply of semiskilled workers with tools & tackles for misc.works as & when required on daily basis for 8 hours per Day. |
| 25 | Supply of skilled workers with tools & tackles for misc.works as & when required on daily basis for 8 hours per Day. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender