Power Government Departments Closing in 12 days TDR #57920005

Tender For Construction Of Second/Additional Source Of New 33Kv Line For Lbsi Airport Varanasi From 220Kv Transmission S/S Harahua Vns To New Proposed Meter Room /Substation Building Of Lbsi Airport Varanasi And Laying Of Additional 33 Kv, 3X300 Sqmm

Issued by Government Departments · Varanasi, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Oct 2026
12 days left
EMD
3.90 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Varanasi → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Second/Additional Source Of New 33Kv Line For Lbsi Airport Varanasi From 220Kv Transmission S/S Harahua Vns To New Proposed Meter Room /Substation Building Of Lbsi Airport Varanasi And Laying Of Additional 33 Kv, 3X300 Sqmm Xlpe Underground Cable From 33Kv Bay To Existing Double Pole At 220 Kv Transmission Substation Gajokhar Varanasi On Turnkey Basis. (All Material Should Be As Approved Gtp By Puvvnl (Standard Make).

BOQ

Name of Work:- CONSTRUCTION OF SECOND/ADDITIONAL SOURCE OF NEW 33KV LINE FOR LBSI AIRPORT VARANASI FROM 220KV TRANSMISSION S/S HARAHUA VNS TO NEW PROPOSED METER ROOM /SUBSTATION BUILDING OF LBSI AIRPORT VARANASI AND LAYING OF ADDITIONAL 33 KV, 3X300 SQMM XLPE UNDERGROUND CABLE FROM 33KV BAY TO EXISTING DOUBLE POLE AT 220 KV TRANSMISSION SUBSTATION GAJOKHAR VARANASI ON TURNKEY BASIS. (ALL MATERIAL SHOULD BE AS APPROVED GTP BY PUVVNL (STANDARD MAKE).
Sl. No. Item Description
1SUPPLY OF MATERIAL FOR CONSTRUCTION OF SECOND/ADDITIONAL SOURCE OF NEW 33KV LINE FOR LBSI AIRPORT VARANASI FROM 220KV TRANSMISSION S/S HARAHUA VNS TO NEW PROPOSED METER ROOM /SUBSTATION BUILDING OF LBSI AIRPORT VARANASI.
2PCC 9 mtr long (including 14 nos of Stud pole arrangement)
3ST Pole 11 mtr long
4ST Pole 13 mtr long
533 Kv 3x300Sqmm XLPE cable (3750*2+44*20=8380 M)
6ACSR DOG conductor 5.2*3+3%=16.07 KM
733 KV V type X-Arm 100*50*6 mm, MS Channel for 11mtr STP/9 Mtr PCC
833 Kv 3x300Sqmm cable jointing kit O/D Make - Raychem, 3M
933 Kv 3x300Sqmm cable jointing kit S/T Make - Raychem, 3M
1033 KV Disc insulator B&S type polymeric
11Disc fitting DOG 70 KN
1233 KV Pin insulator Polymeric
1333 KV Top channel 125x65x6mm- 3200mm
1433 KV Bracing angle 65x65x6mm- 4300mm
1533 KV Stay rod 20x1800mm
16Dropper channel 100x65x6mm- 2200mm
17MS Angle 65x65x6mm (for Gaurding) 80nos
18Earthing rod 20x2500 mm
19Stay Wire7/8 SWG
20GI Wire 4mm
21GI wire 5mm
22Top channel clamp for all size pole support
23X-Arm clamp for all size pole support
24Dropper channel clamp for all size pole support
25Bracing angle clamp for all size pole support
26MS Channel 125x100x6 mm for extention side/height bracket
27MS Angle 65x65x6 mm for extention side/height bracket
28Clamp for side/height bracket channel & angle
2933 KV 'E' bracket
3034 KV F bracket
31GI pipe 6\\" dia
32HDPE Pipe 160mm dia PN6, PE100
33Stay clamp
34Earth wire clamp
35PG clamp for DOG conductor
36Danger Board 33 KV with clamp
37Number plate
38GI Barbed wire
39Nut & bolts with washer all size
40Cable holding clamp
41Clamp for gaurding angle
42Stone pad 300x300x75mm
43Red oxide paint
44Allu. lug 300mm
45Allu. Paint
46Supply of 33 kV, 630Amp. SF-6 Type Extensible, Outdoor type, SCADA compatible and Motorized 3 way smart Ring Main Unit (RMU) complete with one 630Amp VCB and two LBS (load breaker isolator) with FPI (fault passing indicator), FRTU and VPIS along with supply through 1 kVA auxiliary potential transformer 11/0.230 kV as per Discom Specification/TS along with other allied material like cable termination Kit (Touch proof) with Battery charger etc. to connect the same with system, 02 No. Delta earthing complete with 2 inch dia GI pipe 2no*20 mtr deep by providing all materials like GI pipe 2'' dia, 50*6mm GI strip, socket, sand, bricks, cement etc. The RMU shall be complete with all the accessories, auxliary equipment and various combination's of load breaker isolator and circuit breaker for their proper opration (All required materials will be provided by contractor) and foundation work etc.(2 IN & 1 OUT) .
4733 kV underground line caution tape 14'' width
48Eye bolt
49Stay insulator for 20x1800 mm stay rod of 33 kV
5033 KV Cable route marker
51ERECTION OF WORKS FOR CONSTRUCTION OF SECOND/ADDITIONAL SOURCE OF NEW 33KV LINE FOR LBSI AIRPORT VARANASI FROM 220KV TRANSMISSION S/S HARAHUA VNS TO NEW PROPOSED METER ROOM /SUBSTATION BUILDING OF LBSI AIRPORT VARANASI.
52PCC 9 mtr long (including 14 nos of Stud pole arrangement)
53ST Pole 11 mtr long
54ST Pole 13 mtr long
55ACSR DOG conductor 5.2*3+3%=16.07 KM
5633 KV V type X-Arm 100*50*6 mm, MS Channel for 11mtr STP/9 Mtr PCC
5733 KV Disc insulator B&S type polymeric
58Disc fitting DOG 70 KN
5933 KV Pin insulator Polymeric
6033 KV Top channel 125x65x6mm- 3200mm
6133 KV Bracing angle 65x65x6mm- 4300mm
6233 KV Stay rod 20x1800mm
63Dropper channel 100x65x6mm- 2200mm
64MS Angle 65x65x6mm (for Gaurding) 80nos
65Earthing rod 20x2500 mm
66Stay Wire7/8 SWG
67GI Wire 4mm
68GI wire 5mm
69Top channel clamp for all size pole support
70X-Arm clamp for all size pole support
71Dropper channel clamp for all size pole support
72Bracing angle clamp for all size pole support
73MS Channel 125x100x6 mm for extention side/height bracket
74MS Angle 65x65x6 mm for extention side/height bracket
75Clamp for side/height bracket channel & angle
7633 KV 'E' bracket
7734 KV F bracket
78GI pipe 6\\" dia
79Stay clamp
80Earth wire clamp
81PG clamp for DOG conductor
82Danger Board 33 KV with clamp
83Number plate
84GI Barbed wire
85Nut & bolts with washer all size
86Cable holding clamp
87Clamp for gaurding angle
88Stone pad 300x300x75mm
89Red oxide paint
90Allu. lug 300mm
91Allu. Paint
9233 kV underground line caution tape 14'' width
93Eye bolt
94Stay insulator for 20x1800 mm stay rod of 33 kV
9533 KV Cable route marker
96Erection and cartage of 33 kV, 630Amp. SF-6 Type Extensible, Outdoor type, SCADA compatible and Motorized 3 way smart Ring Main Unit (RMU) complete with one 630Amp VCB and two LBS (load breaker isolator) with FPI (fault passing indicator), FRTU and VPIS along with supply through 1 kVA auxiliary potential transformer 11/0.230 kV as per Discom Specification/TS along with other allied material like cable termination Kit (Touch proof) with Battery charger etc. to connect the same with system, 02 No. Delta earthing complete with 2 inch dia GI pipe 2no*20 mtr deep by providing all materials like GI pipe 2'' dia, 50*6mm GI strip, socket, sand, bricks, cement etc. The RMU shall be complete with all the accessories, auxliary equipment and various combination's of load breaker isolator and circuit breaker for their proper opration (All required materials will be provided by contractor) and foundation work etc.(2 IN & 1 OUT) .
97Grouting & concreting of all pole support as per RESPO norms
98Concreting of stay rod as per RESPO norms
99After excavation of bore pit/soil, Laying & dressing of 160mm HDPE pipe with double circuit configuration below PWD/Highway road crossing by horizontal drilling method. 33 Kv 3x300Sqmm XLPE cable shall be safely laid into 160mm HDPE pipe by HDD method. the cable loop shall be properly protected by placing fine red sand, bricks and 75mm thick stone slab for separately each cable loop as per RESPO norms/approved cable laying SOP (all required materials like fine red sand, bricks & stone slab will be provided by contractor)
100After excavation & making of 3930 mtr of cable trench, Laying and dressing of 7860Mtr 33 kV, 3x300 sqmm XLPE cable including loop with double circuit configuration. the cable & cable loop shall be properly protected by placing fine red sand, bricks and 75mm thick stone slab for separately each cable loop as per RESPO norms/approved cable laying SOP and laying of caution tap at a height of about 700mm above the cable (all required materials like fine red sand, bricks & stone slab will be provided by contractor)
101Hosting of 33 kV cable along GI pipe on erected pole support & clamping it
102Making & Jointing of 33 kV 3x300 sqmm cable jointing kit outdoor
103Making & Jointing of 33 kV 3x300 sqmm cable jointing kit Straight Through
104Cartage charge of 33KV Cable
105Cartage charge of all material
106SUPPLY OF MATERIAL FOR LAYING OF ADDITIONAL 33 KV, 3X300 SQMM XLPE UNDERGROUND CABLE FROM 33KV \\"BAY\\" TO EXISTING DOUBLE POLE AT 220 KV TRANSMISSION SUBSTATION GAJOKHAR VARANASI .
10733 Kv 3x300Sqmm XLPE cable (200*1+2*20=240 M)
10833 Kv 3x300Sqmm cable jointing kit O/D Make - Raychem, 3M
109Dropper channel 100x65x6mm- 2200mm
110Dropper channel clamp for all size pole support
111GI pipe 6\\" dia
112HDPE Pipe 160mm dia PN6, PE100
113Nut & bolts with washer all size
114Cable holding clamp
11533 kV underground line caution tape 14'' width
11633 KV Cable route marker
117ERECTION OF WORKS FOR LAYING OF ADDITIONAL 33 KV, 3X300 SQMM XLPE UNDERGROUND CABLE FROM 33KV \\"BAY\\" TO EXISTING DOUBLE POLE AT 220 KV TRANSMISSION SUBSTATION GAJOKHAR VARANASI .
118Dropper channel 100x65x6mm- 2200mm
119Dropper channel clamp for all size pole support
120GI pipe 6\\" dia
121Nut & bolts with washer all size
122HDPE Pipe 160mm dia PN6, PE100
123Cable holding clamp
12433 kV underground line caution tape 14'' width
12533 KV Cable route marker
126After excavation & making of 200 mtr of cable trench, Laying and dressing of 220Mtr 33 kV, 3x300 sqmm XLPE cable along with 30 mtr HDPE pipe below road crossing including loop with double circuit configuration. the cable & cable loop shall be properly protected by placing fine red sand, bricks and 75mm thick stone slab for separately each cable loop as per RESPO norms/approved cable laying SOP and laying of caution tap at a height of about 700mm above the cable (all required materials like fine red sand, bricks & stone slab will be provided by contractor)
127Hosting of 33 kV cable along GI pipe on erected pole support & clamping it
128Making & Jointing of 33 KV 3x300 sqmm cable jointing kit outdoor
129Cartage charge of 33KV Cable
130Cartage charge of all material Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57920005
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 26-10-2026
Authority
Authority Name Purvanchal Vidyut Vitaran Nigam Limited
Work Description Tender for Construction Of Second/Additional Source Of New 33Kv Line For Lbsi Airport Varanasi From 220Kv Transmission S/S Harahua Vns To New Proposed Meter Room /Substation Building Of Lbsi Airport Varanasi And Laying Of Additional 33 Kv, 3X300 Sqmm Xlpe Underground Cable From 33Kv Bay To Existing Double Pole At 220 Kv Transmission Substation Gajokhar Varanasi On Turnkey Basis. (All Material Should Be As Approved Gtp By Puvvnl (Standard Make).
Basic Detail
Tender No 31/EWC(V)/2026-27
Bidding Type Tender
Location
City Varanasi
State Uttar Pradesh
Key Dates
Publish Date 08 Oct 2026
Submission Date 26 Oct 2026
Open Date 27 Oct 2026
Finance
Tender Value Ref. Documents
Tender Fee 5900
EMD 3.90 Lakhs
Exemption Not Available
Document List
BOQ_2253967.xls
f7e9d8f6-e136-461b-859b-27d96b7d15c1.html
TDEWC31PDF.rar
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 08, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 12 days
Oct 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 13 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2253967.xls

html

f7e9d8f6-e136-461b-859b-27d96b7d15c1.html

rar

TDEWC31PDF.rar

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender