Tender For Construction Of Double Storey Building For Range Office, Boundary Wall And Tile Path At Palhalan Pattan. Special Forest Division Tangmarg.
Tender Value
77.60 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
3 days left
EMD
1.55 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Double Storey Building For Range Office, Boundary Wall And Tile Path At Palhalan Pattan. Special Forest Division Tangmarg.
BOQ
| Sl. No. | Item Description |
| 1 | E/W in excavtion by mechanical means (Hydraulic Excavator) over areas (Exceeding 30 cm in depth, 1.5 mts in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed. All Kinds of Soil.. |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. All kinds of soil |
| 3 | Providing & laying dry stone solling, sand/dust including ramming, dressing etc complete in foundations and under floors, including Mech. Carriage & Head load charges up to site of work complete. |
| 4 | Providing & laying in position cement concrete (1cement: 4 coarse sand: 8 graded stone agg 40mm nominal size) mix of specificied grade excl cost of centering and shuttering. All work upto plinth level. |
| 5 | Centering and shuttering including strutting, propping etc and removal of form work for. Foundations, footings, bases of columns etc. |
| 6 | Centering and shuttering including strutting, propping etc and removal of form work for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 7 | Centering and shuttering including strutting, propping etc and removal of form work for: Suspended Floors |
| 8 | Centering and shuttering including strutting, propping etc and removal of form work for: Edges of Slabs |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings balconies, shelves, chajjas, lintles, bands, plain window sills, staircases and spiral stair cases upto floor five level exculding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand: 3 graded stone agg 20mm nominal size). |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (Thermo-Mechanically Treated bars of grade Fe-500D or more). |
| 12 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 14 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five leve |
| 15 | Brick work with F.S.P bricks of class designaion 75 in foundation & plinth in cement mortor (1 cement :6 coarse sand). |
| 16 | Half Brick masonry with FSG bricks of class designaion 75 in foundation & plinth with super structure upto floor V level in cement mortor 1 cement:4 coarse sand. |
| 17 | Providing & laying damp-proof coarse 50mm thick with cement concrete 1:2:4 mix. |
| 18 | Dry random rubble masonry with hard stone from quarry in foundation and plinth. Sokage Pit |
| 19 | Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry. But excluding the cost of nosing of steps etc complete. (50 mm thick with 20 mm nominal size stone. |
| 20 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). First class kail wood 3''x5'' |
| 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (First Class KAIL WOOD 35 mm). |
| 22 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. I/C double glass panes (TOUGHENED GLASS 6MM DGU FILLED WITH ARGON GAS), wire mesh, HANDLES, FIXTURES , and silicon sealent Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 9.149D.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm).WINDOWS |
| 23 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : (First Class Kail wood 35 mm). |
| 24 | Providing 40x5 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix. (1 cement: 3 coarse sand : 6 graded stone 20 mm nominal size). |
| 25 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 26 | 12 mm cement plaster of mix 1:4. (1 cement : 4 coarse sand ). |
| 27 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4. (1 cement : 4 fine sand ). |
| 28 | 6 mm cement plaster to ceilling of mix 1:3 (1 cement : 3 fine sand). |
| 29 | Providing & fixing of wooden Ceiling Joists for truss work. (First Class Budlool Wood). |
| 30 | Providing hoisting and fixing trusses/purlins /rafters /posts/ post-plates or like components including cost of screws etc. complete, Including all carriages up to site of work.( First class Budloo/Fir wood) |
| 31 | Providing & fixing of flat iron of 6 mm thick 50 mm width including holes etc for truss work complete. |
| 32 | Providing & fixing of Anchor Bolts for Truss work complete. |
| 33 | Providing & fixing of precoated iron Tile Profile C G I sheets, colored coated sheet roofing including cutting with all wastages, to size and shape wherever required, with cost of J or L hooks, bolts, nuts, washers with all carriages etc complete. |
| 34 | Providing & fixing of Ridges/Hips & Valleys coloured including cost J or L hooks, bolts and nuts, washers and all carriages etc complete. |
| 35 | Providing & Fixing of plained 300X40 mm wooden Eaves boarding for truss work. (2nd Class Kail Wood). |
| 36 | Providing & Fixing of 20 mm thick wooden planks with T & G celing Soffits. Including all carriages up to site of work. (First Class Kail Wood). |
| 37 | Providing & Fixing of wood work in frames 2''x2'' to be fixed with wall vertical/horizantal for frame work of, T & G Ceiling Soffits, Panelling & Gables etc. (First Class Budlool Wood). |
| 38 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 200x10 mm |
| 39 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm |
| 40 | Providing and fixing 85x42mm chromium plated brass pull bolt lock with necessary C.P. brass screws, nuts, bolts and washers etc. complete. |
| 41 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete. 250 mm weight not less than 280 grams. |
| 42 | Pre-laminated particle board with decorative lamination on both sides. |
| 43 | Providing & fixing gang saw cut,mirror polished, premoulded and prepolished machine cut for kitchen platforms,vanity counters window sills,staircase risers over 20mmthick cement mortar 1:4mix Granite any color or shade 18 mm thick. |
| 44 | Providing and laying vitrified floor tiles 600x600 mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complet |
| 45 | Providing & fixing of imported Wooden Flooring 8 mm thick including all carriages from approved source up to site of work complete job. |
| 46 | Providing & fixing of 3mm thick Foam including all carriages from approved source up to site of work complete job. |
| 47 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 48 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc, in all colours & shades complete. |
| 49 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . 11.29.1 Light shade using white cement 11.29.2 Medium shade using 50% white cement and 50% ordinary cement. |
| 50 | Sanitary work of Standrad & approved quality, Including all carriages of material from approved source up to site of work including all required accessories/parts with all fittings complete. From S.no 52-68 |
| 51 | Providing & fixing of English WC pan with seat cover. |
| 52 | Providing & fixing of Low level cistern PVC 10 litrs. |
| 53 | Providing & fixing Flat back Washbasin with pedestral. |
| 54 | Providing & fixing of centre hole basin mixer for wash basins. |
| 55 | Providing & fixing of CP Angle value. |
| 56 | Providing & fixing of CP health faucet. |
| 57 | Providing & fixing of looking mirror. |
| 58 | Providing & fixing of towel rod. |
| 59 | Providing & fixing of soap cases. |
| 60 | Providing & fixing of Glass Shelves |
| 61 | Providing & fixing of Kitchen sink. |
| 62 | Providing & fixing of mixer for Sink. |
| 63 | Providing & fixing of wall mixer non telephonic for bath Rooms. |
| 64 | Providing & fixing of 50 litre capacity Gyser including all fittings & fixtures. |
| 65 | Providing & fixing of Bib Cocks for bath Rooms. |
| 66 | Providing & fixing PVC pipes 100mm. B Class |
| 67 | Providing & fixing PVC pipes 75mm. B Class |
| 68 | Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-AL PE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, ouplers and connectors etc.This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc.(20mm OD) pipe |
| 69 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes complete. |
| 70 | Constructing of 9'' thick brick masonry manhole in cement mortar 1:4 mix ( 1 cement: 4 coarse sand ) foundation cement concrete 1: 4: 8 mix, 12 mm thick inside cement plaster with finishing, make channels with floating coat of neat cement and making channels in cement concrete 1:2:4 etc all complete job of internal size (450x450x300 mm) including manhole cover of approved brand. |
| 71 | Providing & fixing of concelead Electrification of Standrad and Approved quality, passing through plastic channels / conduits in 3/20, 7/16 & 7/20 wire incld. cost of channels, conduits, all required accessories/parts, nails, wiring, labour charges with all carriages complete. From S.No 73-88 |
| 72 | Lighting points (1.5mm sq. wire). |
| 73 | Lighting Circuits with (2.5mm sq. wire). |
| 74 | Heating Points with SS combine (4mm wire ,15 Amp). |
| 75 | Generator /Inverter fittings Lighting points (1.5mm sq. wire). |
| 76 | Three pin Socket. |
| 77 | Half Indicator Points |
| 78 | Iron D Box of standrad make,18 way. |
| 79 | MCB DP 32- Amp |
| 80 | MCB DP 40- Amp |
| 81 | MCB DP 63- Amp |
| 82 | MCB DP 100- Amp Including all Complete Job |
| 83 | Service Line (7/16 wire) |
| 84 | Exhuasters |
| 85 | Fan Points with 48 inch Sweep ceiling Fans of approved quality. |
| 86 | Concelead LED Bulbs. |
| 87 | Changeover Box 63 AMP. |
| 88 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 89 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 90 | Providing & Fixing of Gate Holdfasts. |
| 91 | Providing & Fixing of Locks |
| 92 | Providing & Fixing of Handles |
| 93 | Providing and fixing of MS Sheet 3mm thick of required pattern for Sign Board fixed in frame for back support including all necessary fittings with primimg, and word writting etc including all Carriage complete (Sign Board) |
| 94 | Applying priming coat with ready mixed pink or grey primer of approved brand and manafacture on wood work. (Hard & soft wood). |
| 95 | Painting with synthetic enamel paint of approved brand and manafacture to give an even shade. (Two or more coats on new work). Wood work. |
| 96 | Providing & applying white cement based based putty of average thickness 2 mm thickness of approved brand and manafacture over plastered wall surface to prepare the surface even and smooth completly. |
| 97 | Distempering with oil bound washable distemper of approved brand and manafacture to give an even shade two or more coats on new work and including priming coat with cement primer. |
| 98 | Pointing walls with Lime Surkhi of required shade on new Brick work with Scafolding and including all carriages of material from approved site up to site of work and as directed by incharge Engineer. (Exterior finishing). |
| 99 | Providing and fixing of Kitchen/Pantary Cabnet using teak wood, Dalmica including all required standrad accesseries/items complete. |
| 100 | Providing and fixing of Wardrobs using teak wood, Dalmica including looking glasses with all required standrad items/accesseries complete. |
| 101 | Carriage of Bricks by Mechanical Transport up to site of work. 50 Kmts |
| 102 | Carriage of Stones by Mechanical Transport up to site of work. 20 Kmts |
| 103 | Carriage of Sand by Mechanical Transport up to site of work. 40 Kmts |
| 104 | Carriage of Bagri Mechanical Transport up to site of work. 40 Kmts Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender