Tender For Construction Of Concrete Water Harvesting Structure In Chitternar Nursery Under The Scheme C A Npv For The Year 2025-26 In Bandipora Forest Division Chittarnar.
Tender Value
5 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bandipora → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Concrete Water Harvesting Structure In Chitternar Nursery Under The Scheme C A Npv For The Year 2025-26 In Bandipora Forest Division Chittarnar.
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto adistance of 50 m outside the 1 periphery of the area cleared. |
| 2 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | P/L of stone soling incl. ramming,hand packing and all carriages, complete job in room fill,trenches,foundation etc. |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and fixing HDPE (High Density Polythene) fabric sheet, 250 gsm, waterproof/weatherproof. Incl carriage complete job.(Use 1.5 as slope factor) |
| 6 | RANDOM RUBBLE MASONRYRandom Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. Reinforcement @ 60 kgs/ cum |
| 10 | Finishing with Deluxe multi surface paint system for interiors andexteriors using primer as per manufacturers’ specifications:Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 11 | FORM WORKCentering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of column etc. for mass concrete. |
| 12 | P/F HI ribcolor coated corrugated galvanizedPPGI sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalumesteel with silicon modified ployester coating ofapproved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5micron polyester back coat over 5 micron primercoats on both surfaces incld. side and end lap andusing 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.5mm THICK (TATA,JSW OR EQ brand) I/C ALL CARRIAGES/H/LOAD i/c 60cm wide ridges and valleys wherever required incl. all fittings and fixtures in roof sheeting (TILE PROFILE). (Note:-1.50 is used as a slope factor ) |
| 13 | Providing and fixing plained eaves boarding.2nd class Deodar wood 250x32 mm (nominal size) |
| 14 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 15 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 16 | Providing, sawing, cutting, sizing, dressing, jointing, fixing and Extraction erection of Department-supplied First Class Deodar wood/ Budloo/Fir Wood/ Kail Wood for Railing, trusses, frames, rafters, purlins, posts, wall frames and other required components, including carriage of the departmental timber up to the site, necessary labour, tools and tackles, complete as directed by the Engineer-in-Charge. The cost of timber shall be excluded, as the same shall be supplied by the Department |
| 17 | Providing and fixing 15cm wide 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 18 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 19 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 150x10 mm |
| 20 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm |
| 21 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 125x65x2.12 mm |
| 22 | Carriage of different materials By Mechanical Transport including loading, unloading and stacking |
| 23 | Sand 25 km |
| 24 | cement 25km |
| 25 | steel 25Km |
| 26 | Aggregate 25 km |
| 27 | Carriage of different materials by Manual Labour including loading, unloading for a lead of 50MTR |
| 28 | steel |
| 29 | cement |
| 30 | Aggregate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender