Tender For Renovation Of Type-Ii Police Houses (H. No. 2787 To 2798B) 36 Nos. House In Sector-42, U.T. Chandigarh.
Tender Value
43.76 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
5 days left
EMD
87539
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Type-Ii Police Houses (H. No. 2787 To 2798B) 36 Nos. House In Sector-42, U.T. Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). .5.3 |
| 2 | Centering and shuttering including strutting, propping etc. and removal of form for :. .5.9 |
| 3 | Suspended floors, roofs, landings, balconies and access platform .5.9.3 |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.. .5.22 |
| 5 | Thermo-Mechanically Treated bars of grade Fe-500D or more. .5.22.6 |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1 |
| 7 | Cement mortar 1:4 (1 cement : 4 coarse sand) .6.1.1 |
| 8 | 12 mm cement plaster of mix : .13.1 |
| 9 | 1:4 (1 cement: 4 fine sand) .13.1.1 |
| 10 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge .15.2 |
| 11 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) .15.2.1 |
| 12 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) -- c.c. Flooring .15.2.2 |
| 13 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3 |
| 14 | W.C. pan with ISI marked white solid plastic seat and lid .17.3.1 |
| 15 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: .17.7 |
| 16 | White Vitreous China Wash basin size 630x440 mm with a pair of 15 mm C.P. brass pillar taps. .17.7.1 |
| 17 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: .17.1 |
| 18 | Kitchen sink with drain board .17.10.1 |
| 19 | 510x1040 mm bowl depyh 250 mm .17.10.1.1 |
| 20 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. .17.28 |
| 21 | Semi rigid pipe .17.28.1 |
| 22 | 32 mm dia .17.28.1.1 |
| 23 | Providing and Fixing Soil, Waste and Vent Pipes .17.35 |
| 24 | 100 mm diameter : .17.35.1 |
| 25 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 .17.35.1.2 |
| 26 | 75 mm diameter : .17.35.2 |
| 27 | Centrifugally cast (spun) iron socket &spigot (S&S) pipe as per IS: 3989 .17.35.2.2 |
| 28 | Providing and fixing heel rest sanitary bend .17.4 |
| 29 | 100 mm diameter : .17.40.1 |
| 30 | Sand cast iron S&S as per IS - 3989 .17.40.1.2 |
| 31 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. .17.43 |
| 32 | Sand cast iron S&S as per IS - 3989 .17.43.1.2 |
| 33 | 75x75x75 mm .17.43.2 |
| 34 | Sand cast iron S&S as per IS - 3989 .17.43.2.2 |
| 35 | Providing and fixing collar: .17.57 |
| 36 | 100 mm .17.57.1 |
| 37 | Sand cast iron S&S as per IS - 3989 .17.57.1.2 |
| 38 | 75 mm .17.57.2 |
| 39 | Sand cast iron S&S as per IS - 3989 .17.57.2.2 |
| 40 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors .17.6 |
| 41 | 100 mm inlet and 100 mm outlet .17.60.1 |
| 42 | Sand cast iron S&S as per IS - 3989 .17.60.1.1 |
| 43 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. .18.1 |
| 44 | 15 mm dia nominal bore .18.10.1 |
| 45 | 20 mm dia nominal bore .18.10.2 |
| 46 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : .18.17 |
| 47 | 20 mm dia nominal bore .18.17.1.A |
| 48 | Providing and fixing uplasticised PVC connection pipe with brass unions: .18.21 |
| 49 | 45 cm length .18.21.2 |
| 50 | 15 mm nominal bore .18.21.2.1 |
| 51 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : .18.46 |
| 52 | 15 mm dia nominal bore .18.46.1 |
| 53 | 20 mm dia nominal bore .18.46.2 |
| 54 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48 |
| 55 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 .18.53 |
| 56 | 15 mm diameter bore .18.53.1 |
| 57 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. .18.62 |
| 58 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms .18.62.2 |
| 59 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: .19.4 |
| 60 | 100x100 mm size P type .19.4.1 |
| 61 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.4.1.1 |
| 62 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: .19.3 |
| 63 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : .19.30.3 |
| 64 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 .19.30.3.1 |
| 65 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. .22.5 |
| 66 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards. .NSR |
| 67 | 15 mm nominal bore .18.51.1 |
| 68 | Removing of Cinder from portion of toilet and filling the same after plastering the walls of sunken portion and water proofing treatment to the sunken portion complete in all respects to the entire satisfaction of Engineer-in-Charge. .NSR |
| 69 | Dismantling C.I./G.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: .NSR |
| 70 | Up to 150 mm diameter . |
| 71 | Providing and Fixing of GI Tank Nipple for fixing of tanks complete in all respect. .NSR |
| 72 | 20 mm . |
| 73 | Providing and fixing of Looking glass mirror 5mm thick of approved make with PVC beading 1-1/4\\"x3/4\\" with plastic Hard Board duly fixed on wall with screw / nuts/ clips/rod plug etc. complete in all respect to the entire satisfaction of EIC. .NSR |
| 74 | Providing and fixing of Soap Dispenser with Glass Bottle complete in all respects make Jaquar range Continental Model ACN-CHR-1131N or equivalent make in the same range as per approved make list. .NSR |
| 75 | Providing and Fisxing of Towel Ring Round with Round Flange Make Jaquar Model no.ACN-CHR-1121N or equivalent make model of approved make as per approved make list. .NSR |
| 76 | Providing and Fisxing of Single Towel Rail 600mm Long, Stainless Steel Make Jaquar Model no.ACN-CHR-1111SM or equivalent make model of approved make as per approved make list. .NSR |
| 77 | Prividing drip seal joints to send cast iron/centrifugally cast (spun) iron pipes and fittings of diameter .NSR |
| 78 | 100 mm . |
| 79 | 75 mm . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender