Tender For Construction Of Model Vending Zone Along Carbazar, Ramdarbar, Chandigarh
Tender Value
37.40 Lakhs
Estimated cost
Bid Submission
15 Oct 2026
6 days left
EMD
74805
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Model Vending Zone Along Carbazar, Ramdarbar, Chandigarh
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by Mechanical means ( Hydraulic excavator) manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, and excluding of disposed earth to be leveled and neatly dresses |
| 2 | Carriage of earth by mechanical transport loading/unloading lead of 2.00 km. to the entire satisfaction of Engineer-in-charge.(DSR 1.1.2) |
| 3 | Preparation of sub grade including trenching, rough dressing of soil, final dressing of earth to give level and camber, watering, rolling with a road roller and compaction of bed complete in all respect. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: ( 1 Cement: 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) (DSR 4.1.10) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR : 6.4.1) |
| 6 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters ,window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any colour and shade (DSR : 8.2.2.2) |
| 7 | Providing and fixing M.S. flat railing having flat size 50x12mm having 6'-0\\" long and 2'-3\\" high above ground level and 1'-0\\" below ground level welded with 1no's M.S. flat 25x10mm horizontally at 6” from Top and 40x10mm from bottom including cost of 2no's 12mm dia nut and bolts with 2no's M.S. pipe of 19mm dia and 3\\" long sleeve piece. The bottom of vertical ounter M.S. flat 50x12mm shall be provided with 9\\" long anchorage piece of MS flat 50x12mm welded at bottom and railing shall be properly embedded in cement concrete 1:2:4 block of size 1'-0\\"x0'-9\\"x1'-0\\". The complete railing shall be painted with two coats of approved quality paint over one coat of primer complete in all respect to the entire satisfaction of Engineer-in-Charge. |
| 8 | Centring and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR 5.9.5 |
| 9 | Providing and laying in position machine batched, machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum excess/ less cement used as per design mix is payable/ recoverable separately). (NOTE- 1) Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately) All works upto plinth level.Concrete of M25 grade with minimum cement content of 330 kg /cum (DSR 5.33.1.1) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.(DSR 5.22.6) |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:1½:3 (1 Cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).4.1.2 |
| 12 | Providing and fixing 300x300mm heavy duty chequered tiles of ISI code 13801:2013 of 25mm thick with minimum 6 mm thick top layer with white cement heavy duty polished with acrylic based coating, jointed with neat cement slurry mixed with pigment to match the shade of the tiles on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) complete in all respect to the entire satisfaction of Engineer-in-charge. |
| 13 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals,oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 14 | Letter writing with 10cm hieght Road/ Concrete pavement/ Paver block marking painton of flooring surface with paint of approved brand by Engineering in charge and complete in all respect. |
| 15 | Manufacturing supplying and fixing retro reflective for Informatory sign boards consisting of 8'-0\\"x2'-6\\" sign boards and definition plate of Size 8'-0\\"x2'-6\\" made up of 3mm. thick ACP sheet, face to be fully covered with high intensity encapsulated type including subject matter, message ,symbols and borders etc. as per IRC 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956 01 and welding the same with 8' high with 2 Nos vertical post of M.S. Channel size 100x100x5mm welded with hold fast of same size 250 mm long at the bottom end to be embedded in ground with cement concrete 1:1 1/2:3 block of size 1'-6\\" x 1'-6\\" x 3' The plate is to be processed by stove enamel paint of approved brand and painting white and black colour alternate bands of 300mm long over one cost of priming coat to vertical post and steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat, complete in all respects and to be entire specification of Engineer-in charge (NS) |
| 16 | Providing and fixing informatory Board of size 900mmx750mm over brick work. The base of the board is made out of 3MM thick ACP sheet which is covered with Y non reflective type sheeting venyle of make 3m /avery dennison or equivalant one side of ACP sheet. The matter as specified in the drawings shall be screen printed over the Vinyl Sheet. The over laminating sheet shall also be pasted on the finished sheet. The rate also includes fixing of the board at site with thre rivets over existing MS Frame complete in all respect to the entire satisfaction of Engineer in charge |
| 17 | Providing and fixing Layout plan for Model Vending site board made made of size 6'x4' fabricated with a frame of MS rectangular pipe of size 96mmx38mm having 2mm thickness the frame further divided with three number in horizontal and four number in vertical position as shown in drawing two number legs of 75mm dia MS pipe having 3mm thickness and 5'-6\\" length having two anchorage piece 1'-0\\" length of MS angle 35mm x35mm x5mm is to be welded at bottom and one angle length 3'-0\\" is to be welded between the two legs. 3mm thick aluminum compound panel sheet is to be fixed onfront & back side of the frame with screws & adhesive. The high intensity micro prismatic sheet free from scratches type IV of ASTM standard (Nikkalite brand/3M/A very Dennison ) is to be pasted on one side of board including overlay duly printed of Layout Plan for Mode l vending site 2mm thick sheet of clear polycarbonate is to be fixed on front side of the frame. The whole structure is to be painted with two coats of special quality paint over one coat steel primer duly embedded in ground with cement concrete 1:2:4 block of size 2'x2'x2½ complete in all respect as per drawing to the entire satisfaction of Engineer-in-charge |
| 18 | Providing and fixing rest room cubicels Cruze 12mm ( of following standard which includes 600mm door size width) made of heat bacteria, water, chemical, impact and anti bacterial reistant 12mm thick solid/wood grain compact laminate. Finish of the compact laminate should be Suede, which includes doors, pilaster and intermediate panels finished with approved tecture/ shades as per the details drawings & as per IS 2026 (Indian standard) and as per the fire retardant BS-476/97 standard. This also details providing and fixing in position necessary hardware made out of stainless stell (grade-304/306) as per manufacturer's specification and architect instruction like : (a) Door Knob (b) Thumbturn (c) Gravity hinge (d) Coat hook (e) Shoe box plate with floor anchor (f) Toprail (g) Tabular holder and corner connector (h) Wall bracket (i) Noise deafening tape (j) Screws & wall plug. The top fittings should consist of SS round toprail which will get fixed with pilasters, with SS tabular holder, SS Corner connector will be used on the corner of cubicles absence of brick wall, SS wall fixing will be used only on the wall which will hold the SS toprail. All screws will of SS 304 grade with stain finish. All pilaster are supported by SS bottom clading, the base of the bottom cladding will be anchored to the floor with a clearance height up to 100mm complete, all as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender