Tender For Special Repair To Bldg No T-19 & T/P-19 (Or Accn & Toilet Block & Incl Lighting Issues And special Repair To Boundry Wall And Chain Link Fencing Around Cobra Csd Canteen Under Ge (P) No. 1 Jabalpur
Tender Value
48.16 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
13 days left
EMD
96500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair To Bldg No T-19 & T/P-19 (Or Accn & Toilet Block & Incl Lighting Issues And special Repair To Boundry Wall And Chain Link Fencing Around Cobra Csd Canteen Under Ge (P) No. 1 Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel/AC/fiber sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 2 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 3 | Taking down Cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed. |
| 4 | Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed. |
| 5 | Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 6 | Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each. complete all as specified and directed. |
| 7 | ~ditto~All as per item No.6 above but exc 1.50 Sqm n.exc 4 Sqm. complete all as specified and directed. |
| 8 | M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:4.complete all as specified and directed. |
| 9 | M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed. |
| 10 | M&L for Cement concrete type D-2 1:4:8 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 11 | M&L for Cement concrete type C-2 1:3:6 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 12 | M&L for Providing, cement concrete type B0 1:2:4 (12.5mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, Hold fast complete all as specified and directed. |
| 13 | M&L for Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match set in CM 1:6 complete all as specified and directed |
| 14 | M&L for Granite(of any type)tiles 16 to 18 mm thick as in any position and similar works over 10mm thick cement screed in CM 1:4, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete all as specified and directed.. |
| 15 | M&L for Machine cut cudappah stone slab 30-35mm thick horizontal/ vertical partion over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 16 | M & L for Virified Ceramic tiles double charged (light shade)10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but n exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20 mm thick screed bed in CM 1:4 to recieve tiles complete all as specified and directed. |
| 17 | M & L for Virified Ceramic tiles double charged (light shade10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm, but n exc 1.00Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick backing coat in CM 1:4 to recieve tiles complete all as specified and directed. |
| 18 | S&F in repair Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed in CM(1:6) complete all as specified and directed. |
| 19 | S&F in repair Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface complete all as specified and directed. |
| 20 | S&F in repair 10 mm thick paver tiles out door vitrified tiles area n. exc 0.36 sqm each as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed in CM(1:6) complete all as specified and directed. |
| 21 | S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed. |
| 22 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length including fastenar of 100 mm long 10 mm dia complete all as specified and directed. |
| 23 | S&F Factory made single/double extruded WPC (Wood Polymer Composite) solid decorative prelam both side flush door 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture pr oof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. |
| 24 | S&F wire gauge i.e. panel will be wire gauge in liew of double side prelam PVC sheet panel the wire gauge shell be wrapped on a additional square 8 mm solid tube and the tube shell be welded tomMS tube the wire gauge shell be stretched to tighten firmly Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 25 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 26 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 27 | S&F SS butt hinges100mm long medium weight, cold rolled. complete all as specified and directed. |
| 28 | S&F 200 mm long extruded SS handles, fabricated type. complete all as specified and directed. |
| 29 | S&F 150 mm long extruded alu alloy handles, fabricated type, anodised. complete all as specified and directed. |
| 30 | S&F 300mm SS sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy. complete all as specified and directed. |
| 31 | S&F 200mm long SS barrel tower bolts of extruded section and fixed. complete all as specified and directed. |
| 32 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples. complete all as specified and directed. |
| 33 | S&F Aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide 4 to 6 nos glass incl 5mm grosted glass complete all as specified and directed. |
| 34 | S&F 4.00 mm thick sheet glass ordinary quality and glazing complete in square nexc 0.50sqm each. complete all as specified and directed. |
| 35 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters/frame of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 36 | S&F TMT steel bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) complete all as specified and directed. |
| 37 | S&F TMT steel bars 5mm dia and over, up to and including 10mm dia in stirrups spcers and binders. complete all as specified and directed. |
| 38 | S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified and directed. |
| 39 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Gde Fe 410-W (Gde- E- 250) quality- A complete all as specified and directed. |
| 40 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 41 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 42 | M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 43 | M&L for in rep suspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 34 mm X 22 mm X 0.8 mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 27mm X24mmX0.8mm thick and thick wall angle 22.2 mm X 22.2 mm X 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 3mm dia GI wire hangers fixed with steel dash through fasteners from purlins of the roof with Provn of light fixture complete all as specified and directed. |
| 44 | M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed |
| 45 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type od soil, complete all as specified and directed. |
| 46 | Returning filling in incl spreading levelling watering and well rammmed in layers n exc 25cm complete all as specified and directed. |
| 47 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.50m for soil complete all as specified and directed. |
| 48 | M&L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in bed to drain pipes for 150 mm bore SWG pipes including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 49 | Supplying, laying and jointing for 150-160mm nominal dia DWC pipes class SN-4 conforing to IS -16098:2013 Part-I stiffness with and incl necessary jointing materials complete all as specified and directed. |
| 50 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated complete all as specified and directed. |
| 51 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests , white, connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromoum plated complete all as specified and directed. |
| 52 | S&F in repair 10 litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level, white, with inlet, ball valve,pvc flush pipe, float and handle incl brackets and waste pipe complete all as specified and directed. |
| 53 | S&F in repair brass chromium plated overhead shower 125mm size (squar/rectangular) with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed. |
| 54 | S&F ovel type counter top Wash hand basin 550x400mm vitreous china (white) including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed. |
| 55 | S&F in repair Vitreous China wash basin, flat back/ oval shape white, excluding taps, waste, chain and plug and porcelain stopper but including brackets, Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed |
| 56 | S&F in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 57 | S&F for in repairs 15mm angle cock/stop cock chromium plated,cast copper alloy, and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed. |
| 58 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 900mm x 330mm x 160mm fixed in repair complete all as specified and directed. |
| 59 | S&F in repair Brass Chromium plated wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. |
| 60 | S&F in repair 15mm bore GI Tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 61 | S&F in repair 20mm bore GI Tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 62 | S&F in repair 25mm bore GI Tubes, 'medium grade',galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 63 | S&F 25mm PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brassv ferrule and fixed complete all as specified and directed. |
| 64 | S&F in reairp Gun-metal,25mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 65 | S&F in repair Gun-metal, 20mm globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 66 | S&F in repair Health faucet (ABSBody) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 67 | S&F Chromium plated SS toilet paper holder including fixing arrangement complete all as specified and directed. |
| 68 | S&F Chromium plated SS soap dish including fixing arrangement complete all as specified and directed. |
| 69 | M&L in repairs PVC Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4 complete all as specified and directed. |
| 70 | M&L in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 71 | S&F in repair bevelled edge mirror of selected quality 5mm glass, mounted on 5mm thick PVC fibre board and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 72 | S&F 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 73 | M&L for 300mm, ordinary rat tail rod/capsule rod pattern springs made of brass including roller and roller plate complete all as specified and directed. |
| 74 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed. |
| 75 | S&F110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls. complete all as specified and directed. |
| 76 | S&F 110mm bore PVC (SWR) bends any radius. complete all as specified and directed. |
| 77 | S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius. complete all as specified and directed. |
| 78 | M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed. |
| 79 | S&F PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors complete all as specified and directed |
| 80 | S&F for 75 mm dia PVC (SWR ) bends and radius complete all as specified and directed. |
| 81 | S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with or without access door complete all as specified and directed |
| 82 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. complete all as specified and directed. |
| 83 | M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.complete all as specified and directed. |
| 84 | S&F of ball bearing runners 45 mm telescopeic chennal 20 inch full extendion load capacity 50 kgs smooth closing after gentle push complete all as specified and directed. |
| 85 | S&F of stainless steel handles 100 mm size for kitchen cabinet shutters etc complete all as specified and directed.. |
| 86 | S&F of chrome plated stainless steel (grade 304) wire basket suitable size(Storage basket) pull out type of large utensils with multipurpose use as per site requriment with necessary fixing clips etc. complete all as specified and directed. |
| 87 | Providing and fixing factory made cupboard shutter with 18 mm thick one side decorative and other side balancing lamination factory pressed OSL HDHMR board of Action Tesa and Equivalent including 2 mm thick PVC edge banding type with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraullic type) etc, complete made by action Tesa authorised OEM complete all as specified and directed. |
| 88 | Providing and fixing factory made with 18mm thick both side balancing lamination factory made HDHMR wood of action Tesa and equivalent approved brand for boxes, shelves, racks, almirah, cupboard and drawer etc including necessary nails, screws etc, complete made by action tesa authorised OEM complete all as specified and directed. |
| 89 | Providing and fixing factory made modular wardrobe with 8 mm thick both sides pre-laminated BSB (both side balancing paper) HDHMR of action tesa and equivalent as per IS: 14587 - 1998 with suitable full threaded steel screws etc on the backing of racks drawer, cupboard, kitchen, cabinet under kitchen counter etc, complete all as specified and directed. |
| 90 | S&F 30mm width Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 91 | M&L for 15 mm thick cement plaster in CM 1:6 on internal surfaces of fair faces of brick work or concrete surfaces with finished surfaces even and smooth with out using extra cement complete all as specified and directed. |
| 92 | M&L for 75mm thick PCC (1:3:6) Type C-2 using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected |
| 93 | M&L for Distempering with 1st quality acrylic distemper (ready mixed) washable, antifungal having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work/old surfaces of wall/ceilingas per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and directed. |
| 94 | Material & Labour for applying Two or more coats of 100% on new/ old surfaces of wall/fascia etc Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces as per manufacturer instructions applied over priming coat with fully automatic airless spary machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI and allow 6-8 hrs to dry the surfaces in both the coats of paint, complete all as specified and directed. |
| 95 | M&L for water proof cement based putty @ 1 Kg (undiluted) per sqm mtr on layers over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surfaces with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surfaces free from dust etc by skilled labour as per following steps:- (1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with mixing capacity of min 2.5 kg putty per minute.(2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.(3) Allow 6-8 hrs time to dry the putty surfaces complete all as specified and directed |
| 96 | S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed. |
| 97 | S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including taking down existing water tank complete all as specified and directed. |
| 98 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete all as specified |
| 99 | M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath,parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using late vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified |
| 100 | M&L for Complete removal of existing treatment of wall/ceiling complete all as specified and directed |
| 101 | S&F in rep SS curtain rails 20-22mm dia fixing with brackets, stops, rollers khob lattu etc. complete all as specified and directed. |
| 102 | S&F SS chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed. |
| 103 | S&F SS chromium plated towel ring 20mm dia, round type, fixed with CP brass screws including wooden/plastic beads complete all as specified and directed. |
| 104 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone agg) as in seismic and other similar bands, coping, bed block or similar work including necessary form work complete all as specified. |
| 105 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 106 | Taking down surfaces of old concrete floor / terrace by picking including existing detoriated / decayed tar felt PCC tiles or any type of treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 250 m complete all as specified and directed. |
| 107 | M & L for 15mm thick rendering on roof surface/concrete surface in CM 1:4 mixed with WPC complete. (WPC will be measured and paid separately) complete all as specified and directed. |
| 108 | M&L for Apply oil bound bitumen primer @ 0.30 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface.complete all as specified and directed. |
| 109 | Supply and Laying APP 3mm thick unrolled over the bitumen coated surface polymeric water proofing membrane Hyperplas standard wt not less than 3kg/sqm with 100mm over laps shall be sealed by flame as per manufactures instruction complete all as specified and directed. |
| 110 | M&L for Applying two coat of bituminous base aluminium paint including preparation and aluminium red oxide complete all as specified and directed. |
| 111 | Dismantling of chain link fencing wire mesh any type complete all as specified and directed. |
| 112 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 113 | M&L for RCC (Design mix M-25) in foundations, including, rafts, footings, foundation beams, bases for columns, etc , basement slab, under reamed piles and mass concrete, complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 114 | M&L for RCC (Design mix M-25) as in columns, pillars, piers, posts and struts etc., complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 115 | M&L for RCC (Design mix M-25) in beams, cantilevers, bressumers, lintels over 1.50 m span, including slightly rounded or chamfered angles coping with throating in top beam, complete all as specified and directed.Note:- Reinforcement shall be measured and paid separately under respective item. |
| 116 | Use & Waste flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work, vertical or to batter, complete all as specified and directed. |
| 117 | Use & waste formwork of square, rectangular, polygonal for rough finish surface of concrete to sides of pillars, posts, struts, piers, columns etc square or rectanguar, complete all as specified and directed. |
| 118 | Use & waste flat formwork to sides and soffits of floor beams, roof beams , beam haunchings girders, lintels, cantilevers etc to plain surface, complete all as specified and directed. |
| 119 | M&L for sub class bricks with sub class ;B; bricks straight or curved on plan exc. 6m mean radius and setting in cement mortar 1:6 etc. complete all as specified and directed. |
| 120 | M&L for old size Fly ash brick with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 121 | M&L for rendering/plaster 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement, complete all as specified and directed. |
| 122 | M&L for three coat white wash or newly plaster,unplastered or concrete surface of wall including preparation of surface complete all as specified and directed. |
| 123 | M&L for for PCC type B1 using 20 mm graded stone aggregate as in coping, apex stone etc complete all as specified and directed. |
| 124 | M&L for two coat of synthetic enamel pinting over a coat of red oxide primer incl preparation of steel new surface over 10 cm width or girth, complete all as specified and directed. |
| 125 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 126 | Supply only Chain link MS galvanisd fencing, weight not less than 3.5 kg/sqm, of any size or type complete all as specified and directed.Note- Weight of chain link fencing shall be assertain by BOO. |
| 127 | S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. in repairs as directed (each line wire to be measured) complete all as specified and directed. |
| 128 | Supply and fixing in repair Concertina Coil Mild steel punched tape concertina coil with Zinc coating 450 mm dia, single razor, with clips spaced 24mm dispensed in compact rolls covering an average span of 6.0 m on expansion to be laid between the 'Y' angle pickets joining by welded at 45 degree slope laip in repairs, (Approx 50 rounds in 1 roll) complete all as specified and directed. |
| 129 | Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator,light fittings etc., complete all as specified and directed.Note :-1. Contractor has to submit existing bldg inventory items having details of serviceable and unsearviceable and physically verified with JE E/M during the handing taking of sites and before commencement of work.2. If work commence without signing of E/M inventory then contractor will be solely responsible for missing of E/M items and decision of engr-in-charge will be final in this regard.3. All E/M items received from site as a schedule of credit should be stores at location decided by engr-in-charge and should be taken out from bldg premises / stored location with confirmation to engr-in-charge |
| 130 | M&L for point wiring with 1.5 Sq mm, FRLSH, PVC insulated, single core, unsheathed, multi stranded 1100 volts grade, copper conductor cable drawn through concealed conduit and including concealed PVC rigid non metalic conduit of size 19/20mm, on ceiling/wall, with and including continuous 1.5 Sqmm, FRLSH, PVC insulated single core multi stranded copper conductor cable earth continuity conductor connected to common earth and earth dolly and including sunk metal sheet enclosure rectangular terminal boxes of suitable size and white cover plates suitable for mounting modular switches, sockets etc and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces for light and fan points complete all as specified and directed. |
| 131 | ~Ditto~ all as per item No.130 but for one Bell Point controlled by one switch. complete all as specified and directed. |
| 132 | ~Ditto~ all as per item No.130 here in before but with one 3 pin, 5 amps, socket outlet on the same board. complete all as specified and directed. |
| 133 | ~Ditto~ all as per item No. 130 here in before but with one 3 pin, 5 amps socket outlet on independent board. complete all as specified and directed. |
| 134 | ~Ditto~ all as per item No.130 here in above but with 1100 Volts grade copper stranded conductor FRLSH cable of size 2.5 Sqmm main & with 2.5 Sqmm earth multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp on Independent board complete all as specified and directed. |
| 135 | Supply and Fixing lamp/bulb holder Surface PVC type ISI mark including 9 watt LED Bulb complete all as specified and directed. |
| 136 | M&L for Sub main wiring in repair with two single core PVC Insulated cable two run of size 4.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed.Note : - Two run of 4 Sqmm & one run of 4 Sqmm cable shall be measured as one unit run. |
| 137 | M&L for Sub main wiring with two single core PVC Insulated cable two run of size 6.0 Sqmm multi-strand copper conductor FRLSH cable 1100 volts grade drawing in and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 6.0 Sqmm multi-strand copper conductor FRLSH cable as continuous earth wire complete all as specified and directed. Note : - Two run of 6 Sqmm & one run of 6 Sqmm cable shall be measured as one unit run..Including taking down old unsv. |
| 138 | Supply and fix in replacement modular bell push, 1 module, 6 amps, complete all as specified and directed. |
| 139 | Supply and fix bell AC 230 volts, single pole ccomplete all as specified and directed. |
| 140 | Supply and fix in replacement modular switch type 230/ 250 volts, 6 amps, 1 module, single pole, one way, complete all as specified and directed. |
| 141 | Supply and fix in replacement modular socket out let multi purpose 2 in 1, 2/3 pin, 6 amps,2 module flush type, ISI marked complete all as specified and directed. |
| 142 | Supply and fix in replacement switch modular 16 amps, flush type, ISI marked complete all as specified and directed. |
| 143 | Supply and fix in replacement modular socket 2/3 pin combined, 6/16 amps 2 module, flush type, ISI marked complete all as specified & directed by Engineer-in-Charge. |
| 144 | Supply and fix ceiling rose surface bakelite, three terminal complete all as specified and directed. |
| 145 | Supply and fix in replacement Smart bright Batten Series, LED luminaire using LEDs 22/20 watt, natural white, 2200 Lumen, THD max 10 % ,CRI min 80 % with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output with wide voltage protection range, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start ,with 3 core flexible copper wire 1.5 sqmm and connecting accessories ,Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification .Including taking down old unsv. complete all as specified and directed. |
| 146 | Supply and fixing I LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed/surface type, as directed, with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 147 | Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified and directed |
| 148 | Maintenance and checking of ceiling fan/exhaust fan of any size/type/make, checking the serviceability of all parts, electric connections etc. Preparation of old painted surfaces and painting with two coats of synthetic enamel paint of approved shade, reconnecting/hanging in original position, reconnecting the electric cables and testing complete all as specified and directed. |
| 149 | Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 150 | Supply and fix in replacement LED street light / security light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protectioncomplete all as specified and directed. |
| 151 | Supply and fix in replacement modular stepped type electronic fan regulator flush type, two module on the existing phenolic laminated etc., as required, single pole, 240 volts, grade 120W watts, 2 Module heavy duty and ISI marked complete all as specified and directed |
| 152 | S&F in replacement sheet metal enclosure MCB DB double door [Acrylic], Triple pole and neutral, 440 volts, 4 way with 200 Amp, 10 KA breaking capacity rated copper bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified and directed. |
| 153 | Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 12 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as directed.(Note : MCBs will be Measured separately) Including taking down old unsv .complete all as specified and directed. |
| 154 | Supply and Fixing Sheet metal enclosure for DBs when MCBs to be Used, 4 way, SPN, double door type, 240 Volt with 200 amps rated busbar complete all as directed.(Note : MCBs will be Measured separately) Including taking down old unsv .complete all as specified and directed. |
| 155 | S&F in replacement MCB Triple Pole and Neutral 63 Amps,415 V , 'C' series, 10KA breaking capacity complete all as specified and directed. |
| 156 | S&F in replacement MCB Single Pole and Neutral 240Volt, 40 Amps, 'C' series,10KA breaking capacity complete all as specified and directed. |
| 157 | S&F in replacement MCB Single Pole 240Volt, upto 40Amps, 'C' series, 10KA breaking capacity complete all as specified and directed. |
| 158 | Supply and laying & testing and commisioning LT underground cable 1100 volts grade,in repair XLPE insulated and PVC sheathed heavy duty armoured with multi staranded aluminium conductor laid in pipes, trenches/ducts, on poles etc of the Size of 6 sqmm x 2 core and as per relevance IS code complete all as specified and directed :- |
| 159 | M&L dry river washed and screened dry sand for filling in trenches below and around the cable for cushioning including punning down as specified inrelevant clause of SSR Part I complete all as specified and directed. Note:- Punned thickness shall only be measured and paid. |
| 160 | Supplying and laying un-reinforced precast concrete cable cover, class LV Type 2 flat, size 300mm x 180mm x 40mm complete all as specified and directed. |
| 161 | Earthing complete for various equipments with galvanised steel earth plate electrode 600 x 600 x 6mm thick directly burried in the ground (earth pit not less than 2.25 metre deep below ground level) with top edge of earth plate not less than 1.5 m below the ground level, connected to G.I wire 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel, GI pipe 20mm bore light grade for protection of earthing strip, PCC chamber 1:4:8, type C-1 using 20mm graded stone aggregate, internal surface of concrete chamber plastered with 12mm thick plaster in CM 1:4, funnel with wire gauge of 22 gauge ( 0.63) 8 mesh per linear inch, 50mm thick cover of RCC 1:2:4, type B-1, using 20mm graded stone aggregate, reinforced with 8mm TMT bar at 100mm center to center both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR Part-I and as specified including excavation and earth work and connecting the earthing to an earthing test point as specified and testing on completion complete all as specified and directed.Note:- Unit rate quoted is inclusive of earth lead and protection pipe upto 7.5 metre from earth plate. complete all as specified and directed. |
| 162 | Schedule of credit of Amount Rs. 76,250.00 to be deducted during AOC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender