Tender For Petty Repairs Of B/R & E/M Works, Welcome Maintenance In Md Accn & Periodical Sevices To Bldgs, Repair To Plaster, Fins, Facia & Tank Cleaning At Af Station Kasauli Under Ge Kasauli.
Tender Value
41.50 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
18 days left
EMD
83000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Solan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Petty Repairs Of B/R & E/M Works, Welcome Maintenance In Md Accn & Periodical Sevices To Bldgs, Repair To Plaster, Fins, Facia & Tank Cleaning At Af Station Kasauli Under Ge Kasauli.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' Section - I (B/R) |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 3 | Material and labour for applying water proofing treatment to sunken slab comprising of the following specifications complete all as specified and directed. (i) Cleaning of roof surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material,dirt,dust etc. (ii) Providing and laying water proofing treatment of sunken portion of WCs, bathroom etc by applying cement slurry mixed with acrylic based polymer modified cementitous composit compound coating of make as approved in Technical Instruction 5/2003 (iii) First layer of cement slurry @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm of approved make and allowed layer to air cure for 04 hours. (iv) Second layer of cement slurry @ 0.244 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm and allowed layer to air cure for 04 hours followed with water curing for 48 hrs . (v) 200 micron thick polythene film pasted with the hepl of adhesive shall be provided over treatment . |
| 4 | Material and labour for plain cement concrete 1:5:10 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed. |
| 5 | Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as levelling course, finished even and fair to receive floor finishes, complete all as specified and directed. Note- This item shall not be executed in the location, where dismantling of tiles work have been done. |
| 6 | supply and fixing 40 mm dia GI pipe , medium grade as in spout for sunken floor,fixed as in wall inside end fixed with wire netting and external bevelled edge at 45 degree, complete all as specified and directed. |
| 7 | Supply and fixing in repair, bib tap, long body, screwed down, high pressure, cast copper alloy, fancy type, chromium plated, ISI marked, with capstan heads, screwed down suitable for 15mm bore pipe or union complete all as specified and directed. Make- PRIMA Cat No PLF-6202 or equivalent model in makes mentioned in Appendix 'B' of tender document.Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment. |
| 8 | Supply and fixing in repair, stop valves, 15 mm dia pipe, chromium plated, fancy type, ISI marked, screwed down, high pressure with capstain head, (concealed type) with sliding flange, screwed both ends for 15mm bore pipes or for unions complete all as specified and directed. Make- PRIMA Cat No PLF-6210 or equivalent model in makes mentioned in Appendix 'B' of tender document.Note- Contractor shall submit a guarantee certificate from manufacturer to Engineer-in-Charge before claiming payment. |
| 9 | Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed . |
| 10 | Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed . |
| 11 | Supply and fixing of 15mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed. |
| 12 | Supply and fixing of 20mm dia tubes, medium grade, galvanized, ISI Marked, with all fittings such as sockets, bends, elbows, tees etc, fixed to walls and ceiling or laid in floors, including cutting existing steel tubing and screwing, if required for alterations and additions, complete all as specified and directed. |
| 13 | Refixing steel water tubing of 15 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed. |
| 14 | Refixing steel water tubing of 20 mm bore in new or old position with all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed. |
| 15 | Supply and fixed (in repair), vitreous china wash down water closet pedestal pattern, coloured including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray suitable for EWC with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed. |
| 16 | Supply and fixed (in repairs) vitreous China coloured squatting pan of Orissa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including making good to floor surface with the existing surface and connection to flush pipe complete all as specified and directed. |
| 17 | Supply and fixing in repair, vitreous china wash hand basin white flat back of size 550x440mm excluding CI brackets but including PVC waste pipe, PVC connections and chromium plated waste coupling, etc.,complete all as specified and directed. Note- Old pillar tap and other accessories are reused in this items complete all as specified and directed. |
| 18 | Supply and fixing (in repair), PVC connections 45cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed. |
| 19 | Supply and fixing (in repair), PVC connections 60cm long and 15mm dia with PTMT nuts and PVC washers on both ends, complete all as specified and directed. |
| 20 | Supply and fixing ( in repair ) galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified and as directed. |
| 21 | Hacking out old broken glasses of any description and in any position from wooden/steel frames fixed with oil putty or beads etc. and removing from site, complete all as specified and directed. |
| 22 | Supply and fixing for sheet glass 4mm thick, ordinary quality and glazing with oil putty, in square not exceeding 0.5 Square metre in each pane or with wooden beads to wooden shutters, complete all as specified and directed. |
| 23 | Supply and fixing figured glass 4mm thick pin head type, in square not exceeding 0.5 Square metre each pane and glazing with oil putty to steel window and with wooden beads to wooden shutters, complete all as specified and directed. |
| 24 | Cutting or uprooting completely grass tree/ plants (upto 30 cm girth) from wall or any part of building upto triple story buildings, removing off the rubbish off the premises making good disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) to match with the existing surfaces, complete all as specified and directed. |
| 25 | Supply and fixing 10 litre capacity virgin polypropylene cistern, ISI marked, coloured at low level complete with PVC bend/flush pipe and making all connection including taking down existing high or low level unerviceable flushing cistern and making good the disturbed surface to match with the existing surface complete all as specified and directed. |
| 26 | Taking down pelmet box with curtain rod, making good the disturbed surface with the surrounding surface and supply and fixing of mild steel 32mm dia, 1.6mm thick, PVC coated, fancy type, heavy duty drapery rod, complete all as specified and as directed. |
| 27 | Material and labour for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 28 | Material and labour for premium quality, glazed coloured ceramic tiles 300 x 450 x 7mm thick on vertical surfaces of walls including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and directed. |
| 29 | Material and labour for premium quality, joint free, non skid, coloured ceramic 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm tiles, as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including cement screed bed 15mm thick in cement mortar (1:4) base, complete all as specified and directed. |
| 30 | Material and labour First quality joint free coloured non skid ceramic tiles 7 to 8mm thick(square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18mm sqm in skirting with neat cement slurry over 10 mm thick screed bed in cement mortar 1:3 , pointed in white or coloured cement to match, complete all as specified and directed. |
| 31 | Material and labour for premium quality, joint free, non skid, coloured ceramic 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm tiles, as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including cement screed bed 15mm thick in cement mortar (1:4) base, complete all as specified and directed. |
| 32 | Material and labour for premium quality, joint free non skid coloured ceramic tiles, of same description and length as of floor tile but 150 mm height on vertical surfaces of walls over and including 10mm thick rough finished plaster in cement mortar (1:3) set jointed in neat cement slurry and pointed in coloured cement to match ,complete all as specified and as directed. |
| 33 | Material and labour for Easing , adjusting, greasing of sliding rolling shutter of height not exceeding than 4.00 Mtr including minor repair/welding etc to sliding door leaf for noiseless smooth operation (area of door leaf not exceeding 10 Sqm and height not exceeding 4.00 Mtr, complete all as specified and directed. |
| 34 | Material and labour for repairing existing aluminium door/windows, area of shutter not exceeding 3 sqm each, in following steps, complete all as specified and as directed. (a) Taking down shutter from the frame. (b) Replacement of jointing cleats, glazing clips, rubber packing, snap beading, screws etc complete to make the shutter fully functional (c) Refixing the shutter in same location after carrying out repairs. |
| 35 | Supply and fixing water storage tank 500 ltr capacity HDPE double layer ISI marked fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut , ISI marked, screwed and suitable for iron pipe 20 mm bore,including taking down the unserviceable water tank and removing from site, complete all as specified and directed. |
| 36 | Supply and fixing water storage tank 1000 ltr capacity HDPE double layer ISI marked fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut , ISI marked, screwed and suitable for iron pipe 20 mm bore,including taking down the unserviceable water tank and removing from site, complete all as specified and directed. |
| 37 | Supply and fixing 20mm bore ball brass valve, high pressure and heavy duty with polythene float and fly nut screwed for iron pipe or brass ferrule of ISI marked and minimum weight not less than 0.45 kg as approved, fixed as in repairs complete all as specified and directed. |
| 38 | Dismantling plain or corrugated mild steel sheeting any gauge, thickness, including Nanital or similar pattern roof covering, complete all as specified and directed. |
| 39 | Supply and fixing 0.63 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs, walls etc. with grade of zink coating 275, complete all as specified and directed. |
| 40 | Supply and fixing 0.80 mm thick galvanised corrugated mild steel sheeting, class-8 with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts and washers, ISI marked in roofs, walls etc. with grade of zink coating 275, complete all as specified and directed. |
| 41 | Supply and fixing (in repairs) for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with L type or J type or cranked hook bolt in roof, wall etc. complete all as specified and as directed |
| 42 | Supply and fixing 0.80 mm thick Plain, galvanized mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zink coating 275 complete all as specified and directed. |
| 43 | Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based corrugated steel sheet 0.50mm thick, conforming to IS-15961 of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed. Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 44 | Supply and fixing of Pre-painted galvalume aluminuim zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed. Note- The sheets shall have (150 gm/sqm total on both sides) with super durable polyester quality paint of approved colour, suitable for exterior application conforming to IS-15965. |
| 45 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified and directed. |
| 46 | Supply and fix 600mmx600mmx6mm thick ‘E’ Board Classic as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed. Note : Contractor shall produced voucher and manufacture test certificate to Engineer-in-charge before claiming of payment. |
| 47 | Supply and fixing, metal suspended ceiling system OREO GI laid in plain 600X600X0.50 mm (tegular) edge tiles in global white colour to be laid on strong 24mm T-section flanges colour white having rotary stitching on the main runner with web height of 38mm. Note:(i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffit at 1200mm maximum centre.The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall.Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600 mm mould.Cut cross tees longer than 600mm require independent support. 600X600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm,secured to walls at 450mm maximum centres. (ii) Suspension system accessories consisting of HLC sleeve anchor fasterners of thread size 6.50 mmx25/5 with soffit cleat made of galvanised steel of size 27x37x25x1.60mMaterial and Labourevel clip in dimensions of 85x30x0.80 mm with 4mm GI wire complete all as specified & directed. Note : Contractor shall produced voucher and manufacture test certificateto Engineer-in-charge before claiming of payment. |
| 48 | Dismantling of wrought iron or mild steel work of any description not otherwise specially provided complete all as specified and directed. |
| 49 | Supply and fixing mild steel, rolled sections as in main or cross beams, hip and jack rafters, purlin where connected to comman rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates conforming to grade Fe-410(Gde 250), complete all as specified and directed. |
| 50 | Demolition of cement concrete in ground floor and pavings not exceeding 15cm thickness (below or above ground level) and removal the rubbish/ demolished material outside defence land, complete all as specified and directed. |
| 51 | Material and labour for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded mechanically crushed stone aggregate) as in sub base to floor, complete all as specified and directed. |
| 52 | Material and Labour for cement concrete tiles 25cm x 25cm x 22mm thick, machine pressed, set jointed and pointed in neat cement slurry with grey cement and pigments, in floors, cut and polishedover and including 20 mm thick (average thickness) cement screed (1:4) base, complete all as specified and directed. |
| 53 | Material and labour for preparation of old treated surface and applying one coats of oil bound distemper with hand roller, over a coat of primer on plastered surface complete all as specified and directed |
| 54 | Material and labour for complete removal of existing treatment on surfaces of wall by using appropriate technique as approved by Engr-in-charge for complete removal of all layers of old treatment and reaching upto old plastered surface and applying two coats of oil bound distemper with hand roller, over a coat of primer on plastered surface complete all as specified and directed |
| 55 | Material and labour Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer @ 0.90 litre / 10 sqm over new surfaces complete all as specified and directed |
| 56 | Material and labour for preparation of old painted wood surfaces of any description n exe 10cm width or girth and applying one coat of synthetic enamel paint complete, all as specified and as directed. |
| 57 | Material and labour for Preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 58 | Material and Labour for Preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.. |
| 59 | Material and labour for preparing new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 60 | Material and Labour for taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints hacking for key scrubbing down with water etc, complete,including removal of rubbish outside MoD land complete all as specified and directed. |
| 61 | Material and Labour for 15mm thick rendering on fair surface of brick work, concrete surfaces in cement mortar 1:4 including with WPC @2% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified and directed. |
| 62 | Material and labour for 10mm thick rendering in cement mortar (1:6) on surface of any description and any height of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 63 | Material and labour for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer, complete all as specified and directed. |
| 64 | Material and labour for two coat of cement base paint over newly plastered surface of any height including preparation of surface complete all as specified and directed |
| 65 | Supply and fixing floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length of cover plate 150 mm, ISI marked complete all as specified and as directed. |
| 66 | Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed. |
| 67 | Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete all as specified and as directed. |
| 68 | Taking down shutters of any description but not exceeding 1.00 Sq.m each from chowkhat, complete all as specified and directed. |
| 69 | Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat complete all as specified and directed. |
| 70 | Supply and fixing for 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed. |
| 71 | Supply and fixing MS work as in hold fast and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 72 | Material and Labour for plain cement concrete 1:3:6 type C-1 (using 20 mm graded mechanically crushed stone aggregates) as in fixing of hold fasts, copings, bed plates,kerbs or mud stops, lintels upto 1.50m span, plinth courses , seismic and other bands and the like, finished the surface fair and even, including necessary form work complete all as specified and directed. Note- If reinforced concrete, reinforcement shall be measured and paid for separately. |
| 73 | Supply and fixing factory made flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and directed. |
| 74 | Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed . |
| 75 | Suppling and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification complete all as specified and as directed. |
| 76 | Suppling and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame as per specification complete all as specified and as directed. Note : Contractor shall produced voucher and manufacture test certificateto Engineer-in-charge before claiming of payment. |
| 77 | Supply and fixing mild steel butt hinge of 100mm length, cold rolled, medium weight, ISI marked complete all as specified and directed. |
| 78 | Supply and fixing 200 mm mild steel barrel tower bolt, ISI marked, stove enameled black with bright bolt and fixed, complete all as specified and directed. |
| 79 | Supply and fixing 300 mm mild steel sliding door bolt, ISI marked, stove enameled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete all as specified and directed. |
| 80 | Supply and fixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, angle iron chowkats for door ,barred iron doors, ladders framed balusters, walk ways, railings, and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed. |
| 81 | Cleaning & removing all scale and dirt, water tank capacity exec 250ltrs & n.exec 500ltrs from tank and mouths of circulating pipes etc. |
| 82 | Cleaning & removing all scale and dirt, water tank capacity exec 500ltrs & n.exec1000ltrs from tank and mouths of circulating pipes etc. |
| 83 | Supply and fixing in repair 20mm ball valve ,high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball ISI ( Minimum weight 210 gms) screwed & suitable for iron pipe 20mm bore complete all as specified and directed |
| 84 | Supply and fixing in repairs 15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks , compete all as specified. (Note : Weight of pillar tap shall not be less than 0.665 Kg) |
| 85 | Supply and fix 75mm dia of outlet, PVC (SWR) floor trap plain with grating including jointing with solvent cement, complete all as specified and directed. .(Note- UPVC fittings shall be conforming to BS 4515 DIN 19531 and DIN 19534) |
| 86 | Supply and fixing 75mm dia UPVC, soil waste drain pipe, type ‘B’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, fixed to wall, complete all as specified and directed.(Note- Rubber rings for pipes and fittings shall be confirm to IS 5382-1985) |
| 87 | Supply and fixing 75 mm bore UPVC (SWR) plain bend any radius including jointing with solvent cement, complete all as specified and directed. (Note- UPVC bends shall be confirm to BS 4515 DIN 19531 and DIN 19534) |
| 88 | Supply and fixing 75 mm bore UPVC (SWR), branch piece, single Y (equal or unequal), including jointing with solvent cement, complete all as specified and directed. |
| 89 | Supply and fixing in repairs aluminum anodized, barrel tower bolt of extruded section 100mm long, ISI marked, complete all as specified and directed. |
| 90 | Supply and fixing in repairs 300 mm aluminum anodised sliding door bolt, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and directed. |
| 91 | Supply and fixing in repairs mild steel butt hinge of 100mm length, cold rolled, medium weight, ISI marked complete all as specified and directed. |
| 92 | Supply and fixing in repairs mild steel butt hinge of 75mm length, cold rolled, medium weight, ISI marked complete all as specified and directed. |
| 93 | Labour for welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length, thickness of metal to be welded not exceeding 6 mm, complete all as specified and directed. |
| 94 | Taking down shutters of any description exceeding 1.00 Sq.m but not exceeding 2.00 Sq.m each, from chowkhat and refixing in the same opening after erasing complete all as specified and directed. |
| 95 | Supply and fixing Steel windows with side hung shutters with glazing bars, dovetailed or welded including projecting type hinges with steel handle, and steel peg stay complete all as specified and directed. |
| 96 | Supply and fixing aluminum handle, cast type, anodized 150mm long, complete all as specified and directed. |
| 97 | Cutting existing steel tubing & screwing existing steel tubing 15 mm bore, and repair in position without taking down required for alterations and additions, complete all as specified and directed. |
| 98 | Cutting existing steel tubing & screwing existing steel tubing 20mm bore, and repair in position without taking down required for alterations and additions, complete all as specified and directed. |
| 99 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed. |
| 100 | Schedule 'A' Section - II (E/M) |
| 101 | Taking down carefully copper/ aluminium point wiring (light, fan, bell, socket, or power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose incl existing PVC conduit/ casing caping etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 102 | Taking down carefully copper/ aluminium point wiring (light, fan, bell, socket, or power socket) complete fitting such as switches, sockets, lamp holder, utility light fitting, fan regulator, ceiling rose incl existing PVC conduit/ casing caping etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender