Tender For Provision Of Boundary Pillars And Barbed Wire Fencing Alongwith Gate At Naval Land At Haldi And Frost Glass Door With Noic(Wb) Logo At installation Netaji Subhas Under Ge (I) (Cg&N) Kolkata
Tender Value
44 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
12 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Midnapore → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Boundary Pillars And Barbed Wire Fencing Alongwith Gate At Naval Land At Haldi And Frost Glass Door With Noic(Wb) Logo At installation Netaji Subhas Under Ge (I) (Cg&N) Kolkata
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | M & L for PCC (1:3:6) type C2 with 40 mm graded aggregate as in foundation filling and mass concrete in column & wall foundation, complete all as specified and as directed. |
| 3 | M&L Providing precast cement concrete type B-1 in (1:2:4)(20 mm graded aggregate) columns, posts,boundary pillars, etc. and setting in cement mortar (1:4) complete including marking and crafting of letters etc., complete all as specified and as directed. by Engr in Charge . |
| 4 | M&L for TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed. |
| 5 | M&L for TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required including cranking, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed. |
| 6 | M&L for Framed work as in doors or gates of angle of grade Fe-410 W (Gde E-250 Quality A) or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 7 | M&L for Mild steel work as in post and struts in fencing including cutting tops to shape as diredcted, drilling holes, notching for wire, etc, flat iron fillets for securing wire mesh etc,including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe 290 Gde E-165 complete all as specified & directed. |
| 8 | S&F Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia bars at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and as directed by Engr-in- Charge. |
| 9 | M&L for preparation of new or previousaly un-treated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in- Charge. |
| 10 | M&L for Finishing walls with Acrylic Smooth exterior paint of required shade: New work (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified and directed. |
| 11 | Returning filling including spreading, levelling, watering & well ramming in layers n exc. 25 cm soft and loose soil complete all as specified and as directed . |
| 12 | Removing excavated material nexc 50 m but n exc 1.5 m & depositing where directed at a level n exc. 1.50m above the starting point complete all as specified and as directed . |
| 13 | M&L for Cutting of tree bushes and thrown away from working site complete all as specified and as directed . |
| 14 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. |
| 15 | S&F 12mm thick toughened glass as partition wall and door shutter with NOIC (WB) LOGO necessary fixing fasteners etc complete all as specified and as directed. |
| 16 | S&F stainless steel handle 300mm long fancy type including necessary fixing screwed complete all as specified. |
| 17 | S&F mild steel Mortice lock, vertical type, size 100 mm, 4 lever complete all as specified and as directed. |
| 18 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 19 | M&L Granite (of any type) 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender