Tender For Repair To Certain B/R Allied Work In Officer Mess No.1 & 2 And Officers Institute In Domestic Area At Afs Yelahanka.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
1 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Certain B/R Allied Work In Officer Mess No.1 & 2 And Officers Institute In Domestic Area At Afs Yelahanka.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed. |
| 3 | S&F steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed. |
| 4 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPs as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 6 | Dismantling of old Ceiling boards (Fibre, pulp, insulation,etc) or insulation boards /slabs blankets, including cover fillets and frame work all as specified and directed. |
| 7 | S&F of Armstrong Board 9mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions all as specified and directed. |
| 8 | S&F Anodized aluminium snap grid of size 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR all as specified and directed. |
| 9 | S&F at site of the TRAY PANEL SCREW type system with aluminium composite panel of approved plain colour or wood grain printed on interior walls, columns, MS structure, ceiling, coping, slab projections at all heights and elevation including necessary aluminium framework. The aluminium composite panel should 4 mm thick consist of 3 mm thick thermoplastic core of anti oxidant LDPE sandwitched between 2 skins of 0.50mm thick aluminium shall be finished with PVDF based coating on the top side and service coating on the reserve side shall be with a polymer paint.(Note :- The system shall be fitted with necessary aluminium, sub frames, cleats and shall be fixed to the masonry/RC walls / MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be Hot dip galvanized minimum 80 microns thick and shall conform to IS : 4759-1996. Any other acessories such as fastening straps, nuts, bolts, rivets, washers, etc, other than anchor system shall be in indian standard grade all joints of ACP must be sealed with approved sealent of approved colour. sealent make DOW CORNING 789 weather sealent. Rate shall be include to provide open cell polyethylene backer rods, weather sealent, scaffolding upto 25 feet height, necessary safety pracaution etc, all materials and labour complete. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 11 | M&L for non skid coloured ceramic tiles 7 & 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified. |
| 12 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc,laid in 1.50mm spacer and grouted with epoxy joint filling material set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screed bed 15 mm thick in CM (1:6) complete all as directed and specified. |
| 13 | M&L Glazed coloured Ceramic tiles of size 450x300X7mm thick set and jointed in neat cement slurry incl matching PVC corner beading and pointed in white or colour cement to match as in skirting/dado over 10 mm thick rendering in CM 1:4 finished all as specified and directed. |
| 14 | M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles exceeding 0.36 Sqm not exceeding 1.00 Sqm for flooring using 3 mm thick spacer with epoxy gouting over 15 mm thick screed bed in CM 1:6 all as specified and directed. |
| 15 | M&L Vitrified ceramic light shade tiles double charged of 10mm thick and area of each tiles exceeding 0.36 Sqm not exceeding 1.00 sqm as in skirting over 10 mm thick rendering in CM 1:4 dado/skirting including taking down old plaster surfaces finished all as specified and directed. |
| 16 | M&L for Granite(of any type) tiles 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 20mm thick screed bed in CM 1:6 all as specified and directed. |
| 17 | Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) all as specified and directed. |
| 18 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm stone graded aggregate) as in plinth protection and paving finishing surface even and smooth without using extra cement all as specified and directed. |
| 19 | Demolition of brick work or stone masonry built in CM incl all quions all as specified. |
| 20 | Taking down cement plaster from walls of any description all as specified and directed. |
| 21 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, 1:6 type C1 1:3:6 (20 mm graded aggregate) complete all as specified. |
| 22 | M&L 15 mm thick cement plaster in CM (1:6) including finished even and smooth without using extra lime or cement all as specified and directed. |
| 23 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls all as specified and directed. |
| 24 | M&L for applying two coats of distemper (OBD) over primer including preparation to the new surfaces of wall, all as specified and as directed. |
| 25 | M&L Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paint etc complete all as specified and directed. |
| 26 | M&L for Complete removal of existing wall surface finish and applying two coat of oil bound distemper over primer all as specified and directed. |
| 27 | M&L for existing wall surface finish and applying one coat of oil bound distemper all as specified and directed. |
| 28 | M&L for Complete removal of existing surface finish and applying 1-2 mm thick wall care putty at wall and ceiling surfaces all as specified and directed. |
| 29 | M&L preparation of surface and applying two coat of White wash on old wall surface all as specified and directed. |
| 30 | M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Paint all as specified and directed. |
| 31 | M&L Preparing old painted steel surface and applying one coat of Synthetic enamel Paint all as specified and directed. |
| 32 | M&L for one coat of exterior emulsion paint to old decorated surfaces of wall incl preparation of surfaces complete all as specified and directed. |
| 33 | Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description complete all as specified and directed. |
| 34 | All as per item No 33 above but exceeding 1.5 sqm but not exceeding 4 sqm complete all as specified and directed. |
| 35 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm, complete all as specified and directed. |
| 36 | Taking down shutters of any description exc 2.00 sqm each and refixing in the same opening after necessary easing and cutting all as specified and directed. |
| 37 | M&L Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0)( using 12.5 mm graded aggregate)¸depth of embedded portion of hold fast not exceeding half brick complete all as specified and directed. |
| 38 | S&F powder coated anodised aluminium frame with all fixing arrangements for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc aluminium section of powder coating not less than 50 micron all as specified and directed. |
| 39 | S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats and locking arrangement, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified. |
| 40 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges powder coated aluminium snap beading screws etc complete all as specified. |
| 41 | S&F Door closer hydraulically regulated, alluminium body, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified. |
| 42 | S&F Mortice lock, aluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified. |
| 43 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed. |
| 44 | S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed. |
| 45 | S&F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed. |
| 46 | M & L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 47 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 48 | S&F Continuous(piano) hinges, mild steel, bright finish of electrogalvanised 30 mm width of flap complete all as specified and directed. |
| 49 | M&L in repairs Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 50 | M&L in repairs 12mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work complete all as specified and directed. |
| 51 | S&F 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete all as specified and directed. |
| 52 | S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 53 | S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats all as specified and directed. |
| 54 | M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 55 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 all as specified and directed. |
| 56 | S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets, cast or extracted section and fixing bolt and sliding bolts of extracted section complete all as specified and directed. |
| 57 | S&F for aluminium anodised, barrel tower bolt 150mm of extruded section complete all as specified and directed. |
| 58 | S&F for aluminium handle 150mm cast type anodised complete all as specified and directed. |
| 59 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. |
| 60 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds complete all as specified and directed. |
| 61 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane all as directed. |
| 62 | All as item 61 above but figured glass pin head type complete all as specified and directed. |
| 63 | S&F sheet glass ordinary quality 4.00 mm thick as in window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasket complete all as specified and directed. |
| 64 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. |
| 65 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. |
| 66 | S&F MS framed work as grills conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 67 | M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of red oxide zinc chrome to steel surface complete all as specified and directed. |
| 68 | S&F in repairs Decorative wooden finished curtain rod mild steel chromium plated of 20 mm dia complete all as specified and directed. |
| 69 | S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete all as specified and directed. |
| 70 | Taking up or down 15mm steel tubing and connections complete all as specified and directed. |
| 71 | All as per item No 70 here-in-before but 25mm bore complete all as specified and directed. |
| 72 | S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified and directed. |
| 73 | S&F CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors complete all as specified and directed. |
| 74 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. |
| 75 | S&F in repair plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed. |
| 76 | S&F in repairs vitreous China squatting pan 'orrisa' pattern white colour of size 580x440mm with integral foot rests including p'trap and provision of cement concrete for good making surface complete all as specified & directed. |
| 77 | S&F in repairs 10 litre capacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe complete all as specified & directed. |
| 78 | S&F in repairs vitreous china wash basin, white or coloured of size 550 x 400 mm with pedestal including brackets complete all as specified & directed. |
| 79 | S&F in repairs for vitreous china Under Counter sunk Modular wash basin white flat back size 190x550x430mm including fixing of 32mm low density polyethylene pipes (LDPE) of pressure rating 6kg/cm2,coupling, complete all as specified & directed. |
| 80 | S&F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” completed all as specified.Make : FLR-CHR-5167NB of make \\"JAQUAR\\" or equivalent approved by GE. |
| 81 | S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified. Make :FVR-CHR-29037 of Make \\"JAQUAR\\" or equivalent approved by GE. |
| 82 | S&F in repair bib tap of PTMT any colour 15mm dia (Prayag or equivalent ) complete all as specified & directed. |
| 83 | S&F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified & directed. |
| 84 | S&F sink cock in repairs fancy type complete all as specified and (table mounted)with 215 mm swivel spout complete all as specified and as directed. |
| 85 | S&F in repair 15 mm dia two way bib taps (fancy type), cast copper alloy with with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule complete with check nut 15mm bore complete all as specified and directed. |
| 86 | S&F in repairs 15mm dia angle valves, cast copper alloy, CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed Make : ARI-CHR-39053 of make \\"JAQUAR\\" or equivalent approved by GE. |
| 87 | S&F in repair CP Brass centre hole basin Mixer for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.Make : FLR-5169NB of make \\"JAQUAR\\" or its equivalent approved by GE. |
| 88 | S&F in repair CP Brass 3-in-1 wall Mixer with over head and hand shower for hot and cold water screwed down for iron pipe and fixed for 15 mm dia complete all as specified.Make : FLR-CHR-5281N of make \\"JAQUAR\\" or its equivalent approved by GE. |
| 89 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 90 | S&F PVC bathroom Cabinet mirror of size 500x400mm complete all as specified and directed. Make- Prayag Cat No-556 or its equivalent approved by GE. |
| 91 | S&F in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. |
| 92 | S&F of 32mm waste pipe for wash hand basin complete all as specified and as directed. |
| 93 | S&F in repair Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed. |
| 94 | S&F in repairs CP Shower arm 15 mm size, 195 mm long with bend of 45 degree with flange as specified and as directed. |
| 95 | S&F in repairs CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed complete all as specified and as directed. |
| 96 | S&F in repairs of CP health faucet of Cera make including neccessary holding arrangements with screws etc all as specified and directed.Make: Cera -F-8030103 or its equivalent approved by GE. |
| 97 | S&F in repairs corner Glass shelf of cera make including necessary holding arrangements with screws etc all as specified and directed.Make : Cera Model F-5005102 or its equivalent approved by GE. |
| 98 | S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed. |
| 99 | S&F PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement all as specified and directed. |
| 100 | Demolition and breaking up drain pipes ( salt glazed ware, AC, PVC or reinforced concrete ) set in cement mortar of internal dia 75-110mm incl any earth work and demolition of PCC, complete all as specified. |
| 101 | S&F PVC(SWR) Pipes 110mm dia single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. |
| 102 | S&F PVC(SWR) Pipes 110mm dia single socketed, in any length with rubber ring joints,fixed to wall all as specified and directed. |
| 103 | S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed. |
| 104 | S&F PVC (SWR) bends 75 mm dia in any radius with access etc all as specified and directed. |
| 105 | S&F PVC (SWR) bends 110 mm dia in any radius with access etc all as specified and directed. |
| 106 | S&F PVC (SWR) branch piece single 110mm Dia (single 'Y') equal or unequal with access door including creating necessary provn in the existing PVC waste including jointing with rubber washer and solvent clamps etc. all as specified and directed. |
| 107 | S&F in repairs CP grating size 100mm all as specified and directed. |
| 108 | S&F in repairs Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 360x640x685 mm, S Trap- 110 mm complete all as specified and directed. Make : Jaquar SLS-WHT-6851S110PP or Equivelant approved by GE. |
| 109 | S&F in repair Vitreous china urinals, half stall with spreader hole and fixing Acessories of size 355x340x535mm including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, brackets, flush pipe, waste pipe grating and union for discharge pipe fixed, complete all as specified. Make: jaquar USR-WHT-13261H or equivalent approved by GE. |
| 110 | S&F for Curved Urinal Glass Partition 8 MM thick of size 900mm x 450mm frosted glass fixed to wall including necessary clamps and screws all as specified and directed. Make :-Cera Cat No. : S4090104 or equivalent approved by GE. |
| 111 | S&F fully automatic urinal pot of size 295mm x 325mm x 575mm Ceramic Starwhite wall hung Automated Urinal with sensor all as specified and directed.Make: Hindware 60021 or equivalent approved by GE. |
| 112 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, with design etching as specified by the Engr-in-Charge, including fixing to top & bottom pivot & floor spring type fixing arrangement and making necessary holes etc., all as specified and directed. Make : Modi/saint gobin or equivalent approved by GE. |
| 113 | S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed. |
| 114 | Providing and fixing Stainless steel door handle 300mm long and 20mm dia including necessary fixing arrangement, all as specified and directed. |
| 115 | S&F in repair Stainless steel Plate Rack 0.75 Mtr x 0.78 Mtr all as specified and directed. |
| 116 | S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm® complete all as specified and directed. |
| 117 | S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to wall with all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed. |
| 118 | S&F for pully operated clothes drying system pully it 6 feet(with 4 pipes) consisting of four anodized aluminium pipes each of outer dia 22mm and inner dia 19.80 mm and pully made up of derlin with rope guide mounted on channel pair of length 24\\"(distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with self tapping screws provided with kit rope will be polyster braided undyed of 3.5+0.50 mm dia all as specified and directed. |
| 119 | S&F Wall mounted stand consisting of four anodized, Aluminum pipes, each of outer dia 22mm and inner dia 19.8mm, mounted on anodized aluminium angle of size 30 x 30x3 mm, Model- Mount it 20-4 pipes, 5 ft each all as specified and directed. |
| 120 | M&L for factory made WPC single extruded board of 18 mm thick pre laminated shutter for kitchen cabinet, cupboard and tne prelaminated side with different design and other side plain wihte of density not less than 600kg/cum the 18mm board should be 100% lead free ,water proof, termite proof and moisture/weather proof and good screw holding capacity including all fittings complete all as specified. |
| 121 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 10 cm complete all as specified and directed. |
| 122 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 15 cm complete all as specified and directed. |
| 123 | S&F Stainless steel 304 grade kitchen basket 48 cm x 50 cm x 20cm complete all as specified and directed. |
| 124 | M&L for Removing the existing unserviceable tar felt or any type of felt of any description from roof slab or Chajja alongwith screed bed, including cleaning the surface & removing the debris to a distance exc 250m and n.exc 500m, etc complete all as specified & directed. |
| 125 | M&L for rendering 15mm thick (average) in cement mortar 1:4 on roof surfaces mixed with water proofing compound as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified & directed.Note:- supply only of water proofing compound will be measured and paid seperately under relevant item |
| 126 | Supply only approved integral water proofing compound complete all as specified & directed. |
| 127 | M&L Applying oil bounded bitumen primer @ 0.20 Kg/Sqm, and providing 3mm thick APP modified water proofing membrane weighing not less then 3.0 Kg/Sqm, reinforced with non woven polyester matt weighing not less then 160 gm/sqm having softening point not less then 150 degree centigrade, having tensile strength of 650 N/5 cm and 350 N/5cm in longitudinal and transverse directions respectively of the reinforcement, trearing strength of 180 N by torch- on application including min 10cm side over lap & 15 cm end laps. Applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg/sqm as per the detailed specifications. Note : The laying/ applying of APP membrane and other connected work shall be carried out by the approved applicator of the manufacturing company of APP membrane. |
| 128 | S&F for Vertical Blinds made of glass fibre fabrics in width 5” (or 4”). Minimum overlapping of ¾” in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel with front lamination of same fabric. Runners having stainless steel hooks with built-in shock spring and self aligning slip clutch. End control box composed of double gear system, Stainless steel spacers, Botton weight fully plastic covered linked with plastic bead chain complete all as specified & directed. |
| 129 | S&F Modular 8mm thick bevelled edge wall mounted frameless mirror of selected quality glass (single piece) complete all as specified & directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender