Tender For Special Repairs To Mes Infrastructure At 2Afsb Mysore Under Age(I) Af Chimney Hills
Tender Value
30.13 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
19 days left
EMD
60300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Mes Infrastructure At 2Afsb Mysore Under Age(I) Af Chimney Hills
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 sqm each complete all as specified and as directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 sqm but not exceeding 4sqm each complete all as specified and as directed. |
| 3 | Taking down shutters of any description exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and as directed. |
| 4 | Taking down, easing, adjusting and refixing builders hardware as required including renewal of unserviceable screws etc., and refixing in the same opening after laying of tiles, shutters of any description exceeding 1.0 sq.m but not exceeding 2.0 sq.m each, complete all as specified and directed. |
| 5 | Supply & Fixing for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar 1:4 and finished to match with existing surface complete all as specified and as directed. |
| 6 | Supply & Fixing to frame factory made solid PVC door shutter 30mm thick (style) considering of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheets for top rails and bottom rail on side and on gap insert for top rail and bottom rail panelling of plain colour PVC shutter to be fitted in MS frame included/sealed to the stile, rails with suitable PVC sheet heading and jointed to gether with solvent colour complete all as specified and as directed.. |
| 7 | Supply & Fixing for pressed steel frames of size 125 x 60mm x 1.25 mm thick for door with one or more rebates, including necessary fixing lugs, hinges lock strike plate, Single action spring hinges etc complete all as specified and as directed. |
| 8 | Material & Labour for PCC 1:3:6 type C0 using 12.5mm graded stone aggregated as in filling the chowkats/frames complete all as specified and as directed. |
| 9 | Supply & Fixing for 35 mm thick plain framed panelled factory made shutters with IInd class hardwood rail and style with lock rail and panel of 9 mm BWP commercial ply with commercial vaneer on both faces. The size of rail and style as per IS - 1003 Part - I complete all as specified and as directed. |
| 10 | Supply & Fixing for 35mm thick IInd class hardwood glazed and skeleton shutters open rebated and prepared to receive gauge (without sash bars)edges of framing plain, chamfered or round fitted with cut and mitred beads for securing wire gauge sizes of members of shutters complete all as specified and as directed. |
| 11 | Supply & Fixing for Aluminium anodised barrel tower bolts of extruded section, 150 mm long all as specified and as directed. |
| 12 | Supply & Fixing for Aluminium anodised cast type handles 150mm long all as specified and as directed. |
| 13 | Supply & Fixing for aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed. |
| 14 | Supply & Fixing in repair door stopper of rubber and aluminium alloy body, 150 mm size all complete all as specified and as directed. |
| 15 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, cover fillets complete all as specified and directed. |
| 16 | Material & Labour for 6 to 9 mm thick tiles for insulation and accoustic purposes, 60x60 cm in size, staples on aluminium powder coated snap grid in ceiling including aluminium powder coated snap grid frame work and hangers 6 mm dia GI (up to 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of powder coated flat 40x3 mm size 60mm long complete all as specified and directed. |
| 17 | Supply & Fixing in repair Single action spring hinges, mild steel with steel wire spring, stove enameled black, 100mm size including necessary welding fixed in repair to steel door frame complete all as specified and directed. |
| 18 | Material & Labour for mild steel butt hinges medium weight cold rolled of size 100 mm including necessary welding complete all as specified and directed. |
| 19 | Dismantling of old steel/ aluminium window and ventilator (without taking off shutter from the frame) of area not exceeding 1.50Sqm each, complete all as specified and as directed. |
| 20 | Dismantling of old steel/ aluminium window and ventilator (without taking off shutter from the frame) of area not exceeding 1.50Sqm each, complete all as specified and as directed. |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender