Tender For Special Repairs To Joinery & Cupboards Of Building No P-93 At Vijay Baugh And Special Repairs To Childrens Park At Vijay Baugh Under Ge Haddo, Sri Vijaya Puram
Tender Value
48.40 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
7 days left
EMD
96800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
South Andamans → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Joinery & Cupboards Of Building No P-93 At Vijay Baugh And Special Repairs To Childrens Park At Vijay Baugh Under Ge Haddo, Sri Vijaya Puram
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters without taking off shutters from frame n exe 1.5 Sqm each complete all as specified and directed. |
| 2 | S&F for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 3 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubularsections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 4 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant fixed with necessary full body threaded star headed counter sunk S.S screws etc., including taking down old cupboards complete all as specified and as directed.NOTE:-Fitting shall be measured measured seperately under following items , All joint should be filled with sealant |
| 5 | S&F for Factory made double extruded WPC (Wood Polymer Composite) solid door & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length etc., complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 6 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws incl in this item) |
| 7 | S&F for contunoius (piano) hinges , mild steel , bright finish or electrogalvanished and width of flaps 30 mm (when open) etc., complete all as specified and as directed. |
| 8 | S&F for 150 mm long Brass handles, cast type, polished bright etc., complete all as specified and as directed. |
| 9 | S&F for 75 mm size hasp and stable , safety type , brass with mild steel hinges pin including bolt to hinge plate with scrows etc., complete all as specified and as directed. |
| 10 | S&F for Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm etc., complete all as specified and as directed. |
| 11 | S&F for extruded aluminium alloy powder coated handles fabricated types, each 100mm long in aluminium doors etc., complete all as specified and as directed. |
| 12 | S&F for Aluminum powder coated barrel tower bolt of extruded section 150mm long in aluminium doors etc., complete all as specified and as directed. |
| 13 | S&F 100 mm long butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodized , type B-21 complete all as specified and directed. |
| 14 | S&F for Aluminum alloy powder coated sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy etc., complete all as specified and as directed. |
| 15 | Providing and fixing stainless steel sliding door bolt of 200 mm size, bright finished, complete with all necessary screws and fixing arrangements complete all as specified and directed. |
| 16 | Providing and fixing stainless steel tower bolt of 200 mm size, bright finished, complete with necessary screws and fixing arrangements complete all as specified and directed. |
| 17 | Providing and fixing stainless steel door handles (pair) of approved make, bright finished, complete with necessary screws and fixing arrangements complete all as specified and directed. |
| 18 | Providing and fixing stainless steel butt hinges made of high-quality stainless steel, suitable for wooden / metal doors, shutters, cabinets, and windows. Hinges shall be corrosion-resistant, durable, and smooth in operation. The hinges shall be complete with necessary stainless steel screws, properly aligned and fixed to ensure easy movement and long service life complete all as specified and directed.. |
| 19 | Supply and fix aluminium alloy wire mesh 0.45 mm nominal dia of wire average width of aperture 1.40 mm and fixed with aluminum wire staples all as specified and directed. |
| 20 | Supply only Aluminium composite panel sheet of 3.0mm thick with skin thickness of 0.25mm of aluminium on both sides, sandwitched by 2.5mm polyethylene core with PVDF coating of 30.0 micron fixed to aluminium doors complete all as specified and directed |
| 21 | Demolition of Precast cement concrete block walling CM or Cement lime Mortar complete all as specified and as directed. |
| 22 | M&L for Pre-cast cement concrete block masonry type C1 (1:3:6) 20 mm Graded Aggregate built in CM or Cement lime Mortar 1:6 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and as directed. |
| 23 | Dismantling wrought iron or mild steel work of any description not otherwise provided for chain link fencing complete all as specified and as directed. |
| 24 | S&F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-304 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location complete all as specified and as directed. |
| 25 | Demolition of cement concrete in ground floors and paving n. exc 15 cm thickness (above or below GL) complete all as specified and directed. |
| 26 | M&L for 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed. |
| 27 | S&F for glossy finished heavy duty chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and directed. |
| 28 | Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD landcomplete all as specified and directed. |
| 29 | M&L for rendering 10 mm thick in CM 1:4 including mixing water proofing compound on concrete/block masonry surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 30 | Supply Only Liquid Water Proofing Compound |
| 31 | M&L for preparation of old surfaces and applying one coat of 100% premium acrylic emulsion paint having VOC less than 50gm per litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) including filling of cracks, holes and leveling the surface which undulation found with cement, putty etc. complete all as specified and as directed by Engr-in-Charge. |
| 32 | M&L for preparation on newly plastered external wall surface and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint complete all as specified and as directed. Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard. |
| 33 | M&L for 25mm thick EPDM flooring (19mm SBR + 6mm EPDM) for children play area with approved colour and pattern complete all as specified and as directed.Note :1. The work includes thorough preparations of the sub-base, ensuring the exisiting PCC/concrete surface is clean, dry, levelled and free from dust, oil, grease and loose particles, and making good all undulations prior to application.2. The SBR base layer shall be formed by mixing graded recycled rubber granules (1-4 mm size) with approved polyurethane binder, laid evenly over the prepared surface, properly levelled, compacted and finished to achieve the required thickness of 19 mm.3. Over the base layer, the EPDM top layer of 6 mm thickness shall be laid monolithically using colored EPDM granules mixed with PU binder, spread uniformly and finished smoothly with trowel to obtain a seamless,dense, anti-skid and shock-absorbent surface. the surface shall be free from undulations, cracks, joints, air pockets or imperfections. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender