Tender For Comprehensive Repair To Joinery, Flooring, Ceiling, Sanitary, Plumbing Etc In Md Accn Under Age Br-I At Hisar Mil Station Under Ge Hisar
Tender Value
30 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
5 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair To Joinery, Flooring, Ceiling, Sanitary, Plumbing Etc In Md Accn Under Age Br-I At Hisar Mil Station Under Ge Hisar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 16-Oct-2026 | COMPREHENSIVE REPAIR TO JOINERY, FLOORING, CEILING, SANITARY, PLUMBING ETC IN MD ACCN UNDER AGE BR-I AT HISAR MIL STATION UNDER GE HISAR | Terms and Conditions | 27-Oct-2026 |
| 2 | 27-Oct-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) nexc. 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutter of any description exc 1sqm n.exc 2sqm complete all as specified and directed. |
| 4 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F Factory made double riveted WPC (wood polymer composite) solid door frames/chowkat of size 65x125 mm of virgin PVC Polymer of K value 58-60(Suspension Grade) calcium carbonate and natural fibres (wood/powder/rice husk/wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threated star heads SS screw having minimum frame density of 750 kg/cum screw withdrawal strenght of 2200 N (face) and 1100 N (Edge)proof, water/moisture proo, minimum compressive strenght of 58 N/mm2, modules of elasticity 900 N/mm2 and serestance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 6 | S&F Factory made single riveted WPC (wood polymer composite) solid door frames/chowkat of size 65x100mm of virgin PVC Polymer of K value 58-60(Suspension Grade) calcium carbonate and natural fibres (wood/powder/rice husk/wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threated star heads SS screw having minimum frame density of 750 kg/cum screw withdrawal strenght of 2200 N (face) and 1100 N (Edge)proof, water/moisture proo, minimum compressive strenght of 58 N/mm2, modules of elasticity 900 N/mm2 and serestance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 7 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 8 | S &F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 9 | S&F 30mm thick Factory made wire mesh solid WPC (Wood Polymer Composite) shutter of consisting density of 600 Kg/Cum and door to be panelled with ss mosquito mesh and XTN aluminium mesh for additional strenth and safety purpose hologram to be clearly visible on material, Manufacture test certificates to be submitted complete all as specified and as directed by Engr-in-Charge. NOTE : The rate inclusive of weding on existing chowkat or any modification as required to fix the new shutter and make good to match with exsisting surface. |
| 10 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 11 | Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beading with necessary self tapping reviting / screwing and suitable method with and complete all as specified and directed. |
| 12 | Supply and fixing acrylic frosted/figured sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with and including and complete all as specified and directed. |
| 13 | S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm and as reqd for cupboards (consisting two shutters) including 06 Nos hinges of size 75mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE. Note 1: Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces complete all as specified and directed.2 Front Face shall only be measured for payment purpose. |
| 14 | M&L for providing 24mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet prelam colour having density of 600 Kg/Cum Manufactured by an ISO 9001-2015 Certified Company, Termite proof, water proof and flame retardant PVC sheet, manufactured by single layer extrusion process for one side laminated solid PVC foam sheet PVC film laminate should be pasted on PVC sheet with suitable SS hinge, 100mm long decorative ss handle, magnet for receiving door shutter, adhesive and of approved shade as in shelves and shutter. Barcode and hologram to be clearly visible on material, Manufacture test certificates to be submitted complete all as specified and as directed by Engr-in-Charge. |
| 15 | S&F factory made mild steel windows (Box Type ) with side hung shutters including glazing bars to receive glass, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed. |
| 16 | S&F factory made mild steel windows (Box Type ) with side hung shutters without glazing bars but including sash bars to receive wire gauge, dovetailed or welded with and including necessary welding, reveting, tower bolt, hanlde, holdfast, hinges and steel peg stay as per Drg No. CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3) complete all as specified and directed. |
| 17 | S&F factory made mild Steel ventilators with top hung shutter (Box Type) to receive glass or wire guage and steel peg stay with and including necessary welding, reveting, tower bolt, hanlde, holdfast & hinges complete all as specified and directed. |
| 18 | M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails, cupboards frame and similar work con- forming to Fe-290.Gde-E-165 with and including necessary cutting and welding complete all as specified and directed. |
| 19 | S&F stainless steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed. |
| 20 | S&F 100mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 21 | S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 22 | S&F extruded aluminium alloy handles 100 mm long fabricated type anodised complete all as specified and directed. |
| 23 | S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 24 | S&F 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 25 | S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 26 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 27 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge. |
| 29 | S&F 0.56mm thick plain, Aluminium sheeting, Alloy 31000 H4 as in sheet lining to wooden door fixed with brass CP screws of suitable size all as directed. |
| 30 | S&F in repair extruded aluminium anodised hasp staple 100 mm long fabricated type anodised complete all as specified and directed. |
| 31 | S&F in repairs stainless steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed. |
| 32 | S&F in repairs 100mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 33 | S&F in repairs 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. |
| 34 | S&F in repairs extruded aluminium alloy handles 100 mm long fabricated type anodised complete all as specified and directed. |
| 35 | S&F in repairs extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 36 | S&F in repairs 140mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed. |
| 37 | S&F in repairs mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 38 | S&F in repairs 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 39 | M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 40 | Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish, vegetation etc outside complex (MOD land) complete all as specified and directed. |
| 41 | M&L for rendering 10mm thick on fair faces of brick work or concrete walls internal surfaces in CM 1:6 finished to even & smooth without using extra cement. |
| 42 | M&L for preparation of new plastered or unplastered and applying two coat of distemper oil emulsion white or tinted over and incl of one coat of alkali resistance priming paint and 1mm thick wall care putty on wall surface complete all as specified and directed. |
| 43 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed. |
| 44 | M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 45 | M&L for 7mm thick non skid coloured ceramic tiles as in floor (area of each tile exc 0.06 and nexc 0.11sqm) etc set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments. |
| 46 | M&L for glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 47 | M/L rendering 10mm thick in cement plaster 1:4 on brick work or concrete surfaces surfaces or surfaces other than fair face of brick work to receive glazed tiles/granite complete all as specified and directed. |
| 48 | M&L for machine cut pre polished kota stone slab flooring 20 to 25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete all as specified and directed.Note : Screed bed shall be paid seperately. |
| 49 | M&L for 20 to 25 mm thick machine cut pre polished kota stone slab in riser of steps, skirting,dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing incl 10 mm thick rendering in CM 1:4 to recevie to kota stone complete all as specified and directed. |
| 50 | M&L screed bed or bedding layer of morter 20 mm thick cement plaster 1:4 for laying floor finished to receive floor tiles complete all as specified and directed. |
| 51 | Taking down 15mm bore steel/composite/uPVC water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work complete all as specified and as directed. |
| 52 | S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 53 | Re-fixing old steel tubing and connection 15mm bore in new or old position complete on wall/ceiling complete all as specified and as directed. |
| 54 | Taking down 20mm bore steel/composite/uPVC water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work complete all as specified and as directed. |
| 55 | S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings and connection complete for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed. |
| 56 | Re-fixing old steel tubing and connection 20mm bore in new or old position complete on wall/ceiling complete all as specified and as directed. |
| 57 | S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580mm x 440 mm, white with integral foot rest and 'P' or 'S' trap, including provision of cement concrete bedding, connection to trap and flushing pipe and vitreous china foot rest etc complete including provn of PCC (1:5;10) type E2 in filling making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed. |
| 58 | S&F in repairs vitreous china wash down water closet (Padestal pattern) White, with 'P' or 'S' trap including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device and fixing with all joints including connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed. |
| 59 | S&F in repairs, flush pipe of polyethylene of low or high density or PVC. 32mm dia, for low level flushing cisterns all as specified. |
| 60 | S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified & directed. |
| 61 | S&F in repairs PVC seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device for pedestal pan complete all as specified and as directed |
| 62 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 63 | S&F in repairs CP grating 100/110 mm dia with or without hole complete all as specified and directed. |
| 64 | S&F in repair 15 mm dia Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 65 | S&F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 66 | S&F in repairs, 15 mm bore, bib tap,standard of PTMT any colour high pressure screwed for iron pipes and fixed (Min Wt 15mm-90 Grams) complete all as specified and directed. |
| 67 | S&F in repairs 15mm bore angle valve, fancy type , chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed. |
| 68 | S&F in repairs 15mm bore stop valve, fancy type , chromium plated cast copper alloy screwed down, high pressure, with long shank and cup (concealed type) with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed. |
| 69 | S&F in repairs 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 70 | S&F in repairs 32 mm Waste coupling for urinals of PTMT (half or full threaded) (Minimum weight 32mm- 45gms) complete all as specified and directed. |
| 71 | S&F in repair Vitreous China wash basin, white, flat back, size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 72 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/ blankets any thickness and wall paneling including cover fillets complete all as specified and as directed. |
| 73 | S&F for GI frame work for ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre with GI Cleat and steel expansion fasteners with and including ceiling section ( not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed tothe intermediate channel with connecting clips acrośs the intermediate channelat 45mm ceṇtre including 4mm thick non asbestos fibre cement building E boards fixed or laid/inserted to GI framework with screws for fixing in 600 mm x 600 mm grid, complete all as required at site complete all as specified and directed. |
| 74 | Taking down soil/waste/vent and rain water pipes including all fittings of any size and pattern in any position complete all as specified and directed. |
| 75 | S&F 75 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints fixed to wall including necessary nails, plugs and holder bats etc all as specified and as directed by the Engineer - in - Charge. |
| 76 | S & F 75 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints laid in trenches or in floor (concealed) after Cutting chases, pinning in and making good to facings where required and pointing in CM (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing, for drain/spouts pipes or other purposes for waste water etc., and making good, cutting not exc 10 cm girth to concrete surfaces/walls,ceilings or in floors/sunken floors etc, complete all as specified and directed including necessary nails, plugs and holder bats etc all as specified and as directed by the Engineer - in - Charge. |
| 77 | S & F 110 mm dia, PVC SWR pipes, single socketed, in any length with sealant rubber ring joints fixed to wall including necessary MS flat Iron clamps of size (40 x 4mm) all as specified and as directed by the Engineer - in - Charge. |
| 78 | Fixing only 110 mm bore PVC pipes in any length with rubber ring joints fixed to walls with necessary nails, plugs and holder bats etc (Pipes shall be obtained from taking down). |
| 79 | S&F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed. |
| 80 | S&F 75 mm bore, PVC (SWR) bends provided with access door of any radius complete all as specified and directed. |
| 81 | S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 82 | S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed. |
| 83 | S&F PVC 'S' & 'P' 100mm bore complete all as specified and directed. |
| 84 | S&F PVC (SWR) junction, single, (single T) equal or unequal 110mm bore complete all as specified and directed. |
| 85 | S&F PVC (SWR) junction, single, (single T) equal or unequal 75mm bore complete all as specified and directed. |
| 86 | S&F in repairs, PVC (SWR) 75 mm dia, floor trap, plain grating with/without hole including jointing to waste pipe with solvent cement complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 27, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Nov 03, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender