Tender For Provn Of Washroom For Women Officers At Shelter Location At Bhisiana Under Ge (Af) Bhisiana
Tender Value
3.16 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
0 days left
EMD
6320
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Washroom For Women Officers At Shelter Location At Bhisiana Under Ge (Af) Bhisiana
BOQ
| Sl. No. | Item Description |
| 1 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 2 | Material and labour for 15mm thick cement plastering in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid WPC in mortar @ 200 ml per bag of cement of 50kg, finished even and fair complete all as specified and as directed. Note :- WPC shall be measured & paid separately as Supply only under appropriate item of BOQ. |
| 3 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 4 | Material and labour for rendering/plastering 12 mm thick in CM (1:6) on any face of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 5 | Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down or by sand papering or by any other mean and after preparing the surfaces applying three coats of white wash by using paint brush complete all as specified and as directed. |
| 6 | Material and labour for preparation of new surface of walls / Soffits of Chajjas / Roof Projections etc. by removing all loose dust/dirt using broom and applying two coats of premium quality water-based exterior emulsion paint based on 100% acrylic binder with silicone additives, having VOC content not exceeding 50 g/litre when tested in accordance with IS 101 (Part 2/Sec 2) and UV resistance conforming to IS 15489:2004 or latest revision, of approved brand and manufacture, in camouflage pattern using 4 to 5 approved colour shades as per pattern approved by the Engineer-in-Charge over one coat of alkali-resistant water-based exterior primer of the same make, the paint shall be applied by brush, roller to achieve a uniform camouflage finish, complete in all respects as specified and directed by the Engineer-in-Charge.Brand and Make of primer for external : - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac / Weather Shield Alkali Bloc of DuluxBrand and Make of exterior acrylic emulsion paint: - Apex Ultima of Asian / Weather Coat antidust of Berger / Weather shield Protect of Dulux / Excel Mica Marble of NerolacNotes : (i) A minimum interval of 4 to 6 hours, or such duration as recommended by the manufacturer, shall be maintained between successive coats to ensure proper drying, curing and adhesion of the paint system.(ii) The percentage, distribution, arrangement, sequence and configuration of the approved colour shades forming the camouflage pattern shall be finalized by the Engineer-in-Charge/Station Authority using 4 to 5 approved colour shades having RGB values within the range of 110 to 171, ensuring adequate colour variation and blending to achieve the desired camouflage effect. |
| 7 | Material and labour for preparation of new steel and iron surfaces of any description, not otherwise described, exceeding 10 cm in width or girth, including cleaning the surface free from dust, dirt, grease, oil and other foreign matter and surface imperfections by rubbing down with emery paper/sand paper or by other approved means to obtain a clean, smooth and even surface and further applying one coat of red oxide zinc chromate primer and two coats of first-quality synthetic enamel paint of approved brand, shade and tint, each coat applied by brush only after proper preparation and complete drying of the preceding coat, to produce a smooth, uniform, durable and aesthetically acceptable finish, complete in all respects as specified and directed by the Engineer-in-Charge. |
| 8 | Material and labour for reinforced cement concrete (1:2:4) (nominal mix) type B-1 using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns, basement slab etc. complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. |
| 9 | Material and labour for reinforced cement concrete (1:2:4) (nominal mix) type B-1 using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts and the like complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. |
| 10 | Material and labour for reinforced cement concrete (1:2:4) (nominal mix) type B-1 using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels, cills, steps; seismic and other similar bands complete all as specified and as directed.(NOTE : Reinforcement and form work shall be measured and paid for separately under appropriate item of BOQ. |
| 11 | Material and labour for providing and fixing precast RCC (1:2:4) Type B1 cover slabs using 20 mm graded stone aggregate, suitable for covering manholes, septic tanks, sumps, soakage wells and similar openings, including necessary formwork, casting, compaction, finishing, curing and setting in cement mortar (1:4), complete in all respects as specified and directed by the Engineer-in-Charge.Notes:(i) The size, shape and dimensions of the cover slab shall be determined based on the clear opening of the manhole/tank/sump/soakage well or as directed by the Engineer-in-Charge.(ii) Reinforcement steel and MS handle(s)/lifting arrangement, shall be measured and paid separately under the appropriate Schedule item of this Schedule. |
| 12 | Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to better rough finished flat complete all as specified & directed by Engineer-in- charge. |
| 13 | Form work to sides of pillars , posts, struts piers, columns and stanchions and similar works rough finished complete all as specified & directed by Engineer-in- charge. |
| 14 | Form work to flat sides and soffits of floor or roof beams, beam haunchings , lintels, cantilevers, shelves including supports, overhangs, sides of chajjas, fascias, fins etc and similar works rough finished flat surfaces complete all as specified and as directed. |
| 15 | Material and labour for mild steel TMT bars, grade Fe 500D/550D, 10mm dia & over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose.) |
| 16 | Material and labour for mild steel TMT bars, grade Fe 500D/550D, 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length, bent to shape required including bending, cranking etc and binding with and including MS wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.(NOTE : Weight of binding wire shall not be considered for measurement and payment purpose) |
| 17 | Material and labour for hard core of broken bricks of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified & directed by Engineer-in- charge. |
| 18 | Material and labour for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and as directed |
| 19 | Material and labour for PCC ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed |
| 20 | Material and labour for 75mm thick cement concrete ( 1:4:8), type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed. |
| 21 | Material & Labour for 40 mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4), type B-0, (using 12mm graded stone aggregate), including supply and mixing of liquid WPC in mortar @ 200 gm per bag of cement of 50kg, including Polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm, complete all as specified and as directed. |
| 22 | Material and labour for 25mm thick PCC in cement mortar (1:2:4) type B0 using 12.5mm graded stone aggregate as in sub base, the surface finished fair/rough complete all as specified and directed |
| 23 | M&L for providing Non-skid tiles (approved shade), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm (square/rectangular), as per IS 15622: 2017 and IS 13712: 2019, group B1b, having thickness not less than 7mm, premium quality having water absorption should be between 3% to 6%, straight edge/rectified, stain free, laid as in Flooring, set and jointed in Neat Cement Slurry and pointed in White/Coloured Cement, laid over and including 15mm thick Screed Bed in Cement Mortar (1:4), complete all as specified and as directed. |
| 24 | M&L for providing glazed ceramic coloured tiles (any shade in any pattern of light & dark, with or without highlighters etc as approved), as per IS 15622: 2017 and IS 13712: 2019, group B IIa, having thickness not less than 7mm, Premium quality having water absorption should be between 3% to 6%, straight edge/rectified, stain free, size of tile 450x300mm or any size between area of each tile exceeding 0.06 Sqm and not exceeding 0.18Sqm thick as direcetd as in Vertical Surface/Dado etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed Bed in Cement Mortar (1:4), complete all as specified and as directed. |
| 25 | Supply and fixing/laying in trench 160mm nominal outside diameter PVC-U SWR (Soil, Waste and Rainwater) single socketed pipes, Type 'B', conforming to IS 13592, in any required length, laid truly to line and gradient with rubber ring joints using approved pipe joint lubricant as recommended by the manufacturer. The work shall include supplying and fixing all necessary fittings such as bends, tees, double tees, couplers/sockets, reducers, and other fittings, as required for completing the pipeline system. The item shall also include cutting the pipes to the required length, jointing, making necessary connections to the existing or new SWR system, providing proper alignment, testing the completed pipeline for leakage and satisfactory flow, and all labour, tools, plant and incidental works necessary to complete the work in all respects, as specified and directed by the Engineer-in-Charge.Notes: (i) Measurement for payment shall be made for the actual centre-line length of pipe laid, measured along the pipeline alignment between the centre lines of successive fittings, irrespective of the number of joints. No separate payment shall be made for the socket portion of the pipe, insertion length within sockets/joints, or for PVC fittings, the cost of which shall be deemed to be included in the quoted unit rate. |
| 26 | Supply and fixing/ laying in trench 110mm nominal outside diameter PVC-U SWR (Soil, Waste and Rainwater) single socketed pipes, Type 'B', conforming to IS 13592, of approved make, in any required length, laid truly to line and gradient with rubber ring joints using approved pipe joint lubricant as recommended by the manufacturer. The work shall include supplying and fixing all necessary PVC SWR fittings such as bends, tees, single and double Y-junctions, double tees, couplers/sockets, reducers, offsets and other fittings of any angle or radius, with or without access doors, as required for completing the pipeline system. The item shall also include cutting the pipes to the required length, jointing, making necessary connections to the existing or new SWR system, providing proper alignment, testing the completed pipeline for leakage and satisfactory flow, and all labour, tools, plant and incidental works necessary to complete the work in all respects, as specified and directed by the Engineer-in-Charge.Notes: (i) Measurement for payment shall be made for the actual centre-line length of pipe laid, measured along the pipeline alignment between the centre lines of successive fittings, irrespective of the number of joints. No separate payment shall be made for the socket portion of the pipe, insertion length within sockets/joints, or for PVC fittings, the cost of which shall be deemed to be included in the quoted unit rate. |
| 27 | Supply and fixing along wall or laying in trench 75mm nominal outside diameter PVC-U SWR (Soil, Waste and Rainwater) single socketed pipes, Type 'B', conforming to IS 13592, of approved make, in any required length, laid truly to line and gradient with rubber ring joints using approved pipe joint lubricant as recommended by the manufacturer. The work shall include supplying and fixing all necessary PVC SWR fittings such as bends, tees, single and double Y-junctions, double tees, couplers/sockets, reducers, offsets, access fittings, vent cowls, end caps, plugs and other fittings of any angle or radius, with or without access doors, as required for completing the pipeline system. The item shall also include cutting the pipes to the required length, jointing, making necessary connections to the existing or new SWR system, providing proper alignment, testing the completed pipeline for leakage and satisfactory flow, and all labour, tools, plant and incidental works necessary to complete the work in all respects, as specified and directed by the Engineer-in-Charge.Notes: (i) Brackets, clamps, slotted channels, nuts, bolts, anchor fasteners, supporting arrangements and other fixing accessories shall be measured and paid for separately under the relevant BOQ items.(ii) Measurement for payment shall be made for the actual centre-line length of pipe laid, measured along the pipeline alignment between the centre lines of successive fittings, irrespective of the number of joints. No separate payment shall be made for the socket portion of the pipe, insertion length within sockets/joints, or for PVC fittings, the cost of which shall be deemed to be included in the quoted unit rate. |
| 28 | Supply & fixing PVC-U floor trap of size 110x75mm, suitable for 75mm bore pipe, trap shall be long neck and of sufficient length to ensure that the outlet pipe joint remains completely outside the wall thickness, including stainless steel grating, joints jointing with pipe joint lubricant, including PCC work complete all as specified and as directed. |
| 29 | Supply & fixing Bracket, Stack clamp, nut bolt, fastner, etc suitable for pipe of any dia, all made out of mild steel, shape of bracket and clamp as directed including painting with synthetic enamel paint complete all as specified and as directed by Engineer-in- charge. |
| 30 | Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling or laid in floor including cutting and threading of pipe, including cutting chases in wall as required, complete all as specified and as directed. |
| 31 | Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling or laid in floor including cutting and threading of pipe, including cutting chases in wall as required, complete all as specified and as directed. |
| 32 | Material and labour for supplying, hoisting and fixing rotational moulded, double-layer, vertical cylindrical polyethylene (PE) water storage tank with closed top, conforming to IS 12701:1996 (with latest amendments), UV stabilised and suitable for potable water storage, having white inner layer and black outer layer (outer layer minimum of 50% of the total wall thickness), of 500 litres capacity, complete with threaded inlet, outlet, overflow and drain connections with necessary adaptors, tank lid with locking arrangement or threaded type as per manufacturers, and all necessary fittings, supports, nuts, bolts, washers and jointing materials, testing for watertightness, complete, all as specified and directed by the Engineer-in-Charge. |
| 33 | Supply and fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed. |
| 34 | Supply and fixing Gun-metal, globe or gate valve nominal size 20 mm, screwed both ends for iron pipe or for unions, as per IS 778-1984, specifies the material grade as per IS 318 LTB2 complete all as specified and as directed. |
| 35 | Supply & fixing vitreous china wash down water closet pan (pedestal pattern, EWC) white clour (excluding flushing cistern and flush pipe) including connection to drain and to flushing pipe etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed by Engineer-in- charge. |
| 36 | Supply and fixing 10 litres capacity PVC valveless syphonic action type low level flushing cistern as per IS 7231: 2021, white colour with inlet, ball valve, float, handle including brackets and 32mm dia PVC flush pipe complete all as specified and as directed. |
| 37 | Supplying and fixing premium quality health faucet (hand-held bidet spray) with ABS body, ergonomically designed trigger-operated spray head having chrome-plated finish, complete with 1.0–1.2 metre long, 8 mm dia flexible stainless steel braided hose with chrome finish, wall hook/bracket, all necessary fittings, screws, plugs and fixing accessories, include making connection to the angle valve complete all as specified and directed by the Engineer-in-Charge. |
| 38 | Supplying and fixing vitreous china wash basin, white, flat back, of size 550mm x 400mm or nearest standard size, including 32 mm chromium-plated brass waste coupling, and 32 mm PVC flexible corrugated (spring type) waste pipe of minimum 600 mm length, WHB shall be fixed with and including cast iron brackets (embedded in wall upto 110 mm depth, cutting and making good the walls with PCC and cement mortar) and cutting for and pinning in end of bracket or erecting with long screwed shanks & fly-nuts, sealing gap between wall and basin with silicone sealant, complete all as specified and as directed. |
| 39 | Supply and fixing Stop valves, cast copper alloy, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and as directed. |
| 40 | Supply and fixing two-way Bib cock/Angle stop valve with wall flange, CP, screwed down, screwed for 15mm bore brass ferrule or for union and fixed in position complete all as specified and as directed. |
| 41 | Supply and fixing Bib taps, CP, fancy type, long body with wall flange screwed for 15mm bore brass ferrule and fixed in position complete all as specified and as directed. |
| 42 | Supply and fixing pillar tap, CP, capstan head, Long Neck, screwed for 15mm bore brass ferrule/PVC connection and fixed in position complete all as specified and as directed. |
| 43 | Supply and fixing PVC connection 15 mm size of length 600 mm with PTMT nuts of approved quality complete all as specified and as directed by Engineer-in-charge. |
| 44 | Supply and fixing stainless steel towel rail, 20mm dia, 600mm long , including bracket and all fixing accessories complete all as specified and as directed. |
| 45 | Supply and fixing soap dish, made of stainless steel, suitable size to accommodate soap complete all as specified and as directed by Engineer-in-charge. |
| 46 | Supply and fixing corner glass shelf of approx. size 300x300mmx150mm, fancy type, 5.5 to 6mm thick toughened glass, with CP bracket and gurad railing, fixed along wall with CP brass screws and PVC plug complete all as directed by Engineer-in-charge. |
| 47 | Supply and fixing bevelled edge mirror of selected quality glass, minimum 5.5mm thick, of size as directed by the Engineer-in-Charge, mounted on a premium quality PVC backing sheet of 2 mm to 3 mm thickness. The mirror glass shall be bonded to the PVC backing sheet using approved high-strength waterproof mirror adhesive to prevent moisture ingress, deterioration of silver backing and warping of the mirror. The mirror assembly shall be fixed to the wall with polished chrome-plated (CP) brass or stainless-steel mirror studs complete with rubber, neoprene or silicone washers/spacers to prevent direct contact between the mirror and metal fittings. The item shall also include screws, CP caps, drilling of holes, cutting to size, fixing in position, making good disturbed surfaces and all other accessories required for proper installation, complete in all respects as specified and directed by the Engineer-in-Charge.Note: (i) Measurement for payment shall be made on the net plan area of the mirror actually fixed in position and shall be measured in square metres (sqm). |
| 48 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/ Chowkhat (Single Rebated) of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed.Note: (i) WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 49 | Supply and fixing factory made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain moulded PVC Sheet Polyurethane painted on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified in SSR (Part-I, specifications) & shown in relevant drawing of item No. 8101 and 8104 in SSR (Part-II, rates) and as directed by Engineer-in-Charge. |
| 50 | Supply and fixing stainless-steel (304 Grade) butt hinges of size 100mm long x 25mm wide and 2mm thick and including star headed counter sunk steel screws, min 32mm long and suitable No as per holes in hinge complete all as specified and as directed by Engineer-in-charge. |
| 51 | Supply and fixing Extruded aluminium alloy handles, fabricated type, 150mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge. |
| 52 | Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm long fixed with and including steel screws complete all as specified and as directed by Engineer-in-charge. |
| 53 | Supply & fixing aluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in- charge. |
| 54 | Supply & fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) anodised frame, made out of aluminium section for window, ventilator with one or more rebates including joining cleat for fixing etc. conforming to IS:733 and IS:1285, aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and as directed by Engineer-in-Charge. |
| 55 | Supply & fixing anodised aluminium ventilator shutter, side hung type without sash bars, made out of Powder coated aluminium (minimum thickness of powder coating 50 micron) section weighing not less than 0.55 Kg/mtr conforming to IS: 733 and IS:1285, including necessary joining cleats, glazing clips, EPDM rubber/neoprene gasket/packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 Nos) suitable handle (1 No.), complete all as specified and as directed by Engineer-in-Charge.Note :- Aluminium chowkhat /frame and Glass shall be measured and paid separately under appropriate item of BOQ. |
| 56 | Supply & fixing 4 mm thick sheet glass ordinary quality in squares/rectangular any area upto 0.5sqm in each pane (aluminium door/window/ventilator) complete all as specified and as directed by Engineer-in- charge. (i) The cost of fixing members/accessories forming part of the respective door/window/ventilator frame, such as glazing beads, retaining flats, clips or other holding arrangements, shall be deemed to be included in the respective BOQ item and nothing extra shall be paid on this account. Please Enable Macros to View BoQ information |
| 57 | Supply & fixing 4 mm thick sheet glass ordinary quality in squares/rectangular any area upto 0.5sqm in each pane (aluminium door/window/ventilator) complete all as specified and as directed by Engineer-in- charge. (i) The cost of fixing members/accessories forming part of the respective door/window/ventilator frame, such as glazing beads, retaining flats, clips or other holding arrangements, shall be deemed to be included in the respective BOQ item and nothing extra shall be paid on this account. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender