Tender For Renovation Of D Type Qtr. At Basta For The Year 2026-27_Building
Tender Value
16.46 Lakhs
Estimated cost
Bid Submission
16 Oct 2026
0 days left
EMD
16469
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baleshwar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of D Type Qtr. At Basta For The Year 2026-27_Building
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches in all kind of soil including dressing and leveling the bed upto the required depth and depositing the excavated materials with all leads and lifts T&P shoring & Shuttering if required etc.complete as directed by the Engineer-in-charge. |
| 2 | Filling foundation and plinth with sand well watered and rammed with cost carriage royalty etc.complete in all respect as per specification and direction of Engineer-In-Charge |
| 3 | C.C.(1:3:6) in foundation and plinth with 4cm. size h.g. metal including cost carriage etc.complete in all respect as per specification and direction of Engineer-In-Charge |
| 4 | Fly ash brick masonry in cement mortar ( 1:6 )in foundation & superstructure in all floors using 25cmX12cmX8cm size having crushing strength not less than 75 Kg/cm2 in cement mortar (1:6) etc. complete as per direction of the Engineer in charge. Foundation |
| 5 | Superstructure |
| 6 | 12mm thick cement plaster (1: 6) rough surface of out side of brick wall including watering and curing with cost, conveyance, royalty and taxes of all materials and labour with T&P and scafolding as required for the work etc. complete in all respect as per specification and direction of Engineer-In-Charge |
| 7 | 16mm thick cement plaster (1: 6) rough surface of in side of brick wall including watering and curing with cost, conveyance, royalty and taxes of all materials and labour with T&P and scafolding as required for the work etc. complete in all respect as per specification and direction of Engineer-In-Charge |
| 8 | Dismantling and removing doors & Windows and ventilators including removal of frame ,hinges,fastening and stacking the same for reuse and removing the debris as per specification and direction of Engineer-In-Charge |
| 9 | Providing fitting and fixing of vitrified tiles in floors, treads or steps and landing on 25mm thick bed of c.m. 1:1 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles,all materials,labour.t&p,all taxes of materials etc complete as per direction of the Engineer-in-charge. |
| 10 | Providing fitting and fixing of Ceramaic Glazed tiles in dados,skirting and riser of steps on 12 mm thick cement plaster 1:3 jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles,all materials,labour.t&p,all taxes of materials etc complete as per direction of the Engineer-in-charge. |
| 11 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures..including the cost of all materials, hardware fittings , cost of all labour , conveyance, unloading, T&P,etc, complete asper the direction of Engineer-in-charge |
| 12 | Providing fitting and fixing up partition walling OEL aluminum anodized sectionNo.9210 and 9207 as single groove and double groove respectively as horizontal andvertical member and OEL section 4660 asTapered clip for fixing up 12mm thick prelaminated board (Nova pan Make) andjointing angle No. 1855 etc. |
| 13 | Providing fitting and fixing of false ceilling with Aluminum anodised T section No 3215 with 2'-0\\" center to centre, L section No 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2'-0\\" x 2'-0\\" using 12mm thick prelaminated particle Board suspended from ceilling etc complete as directed by the Engineer-in-charge |
| 14 | Providing & Fixing Ceramic floor Tile in stair step / floor on 25mm thick bed of cement plaster (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 15 | Distempering two coat any approved shade including cost of distemper with necessary preparation to surface including cost conveyance and all taxes of all materials and labour with T&P required for the work etc.complete in all respect etc. complete as per direction of Engineer in charge. (Gr. Floor) |
| 16 | Propviding 4 cm Grading concrete with cc (1:2:4) over roof slab in ground floor with cost, conveyance of materials labour, T&P required for the work, including royalty etc.complete as per direction of the Engineer-in-charge. |
| 17 | RCC M-25 in roof slab using 20 mm size chips including cost of formwork excluding cost of steel. etc.complete as per direction of the Engineer-in-charge. |
| 18 | Supplying, fitting fixing & placing in position uncoated HYSD bar rainforcement including cutting, bending, binding of M.S. rod including cost conveyance, all taxes of materials, labour T&P etc. complete as per approved design, drawing & direction of the Engineer-in-charge. |
| 19 | Providing ,fitting and fixing big six or trafford A.C.Sheet in roof including cost of A.C. Sheets, labour for fixing of ridges ,wind ties including drilling holes in wind ties, etc complete , but excluding cost of ridges,wind ties, and .fittings etc.complete as per direction of the Engineer-in-charge. |
| 20 | Fitting fixing of iron pipe for roof coloumn including all labour T&P etc.complete as per direction of the Engineer-in-charge. |
| 21 | Finishing wall with weather coat 2 coats in approved quality including necessary preparation of surface, cost conveyance all taxes of materials, labour, T&P etc. complete to shape as per direction of the Engineer-in-charge. |
| 22 | Painting two coats with S.E.Paint on old/new steel work etc. complete to shape as per direction of the Engineer-in-charge. |
| 23 | Loose furnitures including transporting placing and fixing of material etc.. complete as per direction of Engineer in charge. Lumsump Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 08, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender