Tender For Relaying Of Damaged Pipe Line And Restoration Of Village Plain Cement Concrete Road From Existing Distribution System Within The Command Area Village Of Meherpur, Benui, Simuldihi Of Babuijore (Zone-I) Piped Water Supply Scheme Under Birbh
Tender Value
5.86 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
9 days left
EMD
11722
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Birbhum → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Relaying Of Damaged Pipe Line And Restoration Of Village Plain Cement Concrete Road From Existing Distribution System Within The Command Area Village Of Meherpur, Benui, Simuldihi Of Babuijore (Zone-I) Piped Water Supply Scheme Under Birbhum Sadar Sub Division , P.H.E Dte Within Birbhum Division P.H.E Dte. (Sl. No. 09)
BOQ
| Sl. No. | Item Description |
| 1 | Supplying HDPE (Materials grade PE-100) pipes conforming to IS 4984-1995 with latest revision & amendments if any with necessary HDPE specials (excluding cost of CIDF valves) including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder,road sub-grade and aits flank but excluding moorum laterite or sand stone / hard rock cutting with chisel required including cutting road flank/ brick pavement etc. without damaging the exisiting telephone/electrical cable line etc.(in case of damage of any type of cable line by the agency at the time of execution necessary damage charge as applicable by the respective authority will have to be brone by the agency at his own cost)upto the depth (av.) so as to maintain 1.10m.earth cushion from top of the pipe upto G.L. including loading unloading carrying lowering laying fitting fixing carefully pipes, valves and specials with the all types of jointing materials in trenches maintaining proper levels and alignment jointing the pipes and specials by butt welding/ adopting suitable method (But weld jointing with help of hydraulic tack and trimming machines, Hitter etc. for reaching at necessary melting point of HDPE pipe so that joint can be monolithic) so as to facilitate the maintenance of pipe line locally as per conventional method in future.(A) Pressure Rating : PN 6 (ii) Laying of pipe line including cost of pipe & fittings/specials butexcluding cost of valves. a)50 MM |
| 2 | b) 63 mm(OD) |
| 3 | c) 75 mm(OD) |
| 4 | d) 90 mm(OD) |
| 5 | e)125 mm (OD) |
| 6 | Filling the pipe line with water, testing hydraulically as per I.S 3114-1965 (Article-6) in section of a length not exceeding 500mtr. for head of pressure as per specification including supplying installing and fixing all equipments such as diesel pump set, blank flange, pressure gauge, valve, pressure pump and all other tools and plants including drilling topping and plugging of necessary holes to pipes, blocking ends providing temporary thrust block and subsequent blocking of holes and other jointing materials and dismantling and removal of the same including disposal of water etc. all complete as per specification and direction of EIC. The rate is inclusive of cost of requisite water to be arranged by the contractor (Recovery rate of water @ Rs.10.00/m3, if contractor used water from deptt. source).B) For UPVC/HDPE Pipe a) 50mm dia (OD) |
| 7 | b) 63 mm dia (OD) |
| 8 | c) 75 mm dia (OD) |
| 9 | d) 90 mm dia (OD) |
| 10 | e)125 mm (OD) |
| 11 | Cleaning thoroughly the inner surface of pipe line including specials and valves by flushing with water and subsequently disinfection of the same pipe line by flushing again with water containing bleaching powder resulting in residual chlorine not less than 15mg/ltrs. after 24hrs. of such filling including laboratory testing of water samples obtain from the disinfested pipe line and disposal of water from the pipe line after completion of the work. The rates including of cost of requisite water to be arranged by the contractor) (The rate of water @Rs. 10/m3 may be recovered, if the contractor used water from deptt. source). B) For UPVC/HDPE Pipeb) 50mm dia (OD) |
| 12 | b) 63 mm dia (OD) |
| 13 | c) 75 mm dia (OD) |
| 14 | d) 90 mm dia (OD) |
| 15 | e)125 mm (OD) |
| 16 | Submission of complete detailed drawing of distribution system, rising main etc. after execution of work showing position of different types of valves, fittings/specials sluice valve chamber with location, node to node wise in the sanctioned drawing as completion drawing of the water supply scheme as per direction and satisfaction of EIC. The list of dia wise fitting/specials, different pipes ;of valve used in the rising main should be shown in the completion drawing (not separate) with verified by SAE & AE in-charge of the scheme. The above drawing will be submitted in 5 copies. |
| 17 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m In ground floor including roof.a) Upto 150 mm. thick |
| 18 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)(B) Do-by fine sand |
| 19 | Ordinary cement concrete M-15 (Mix 1:2:4) with graded stone chips (20mm down Size) excluding shuttering and reinforcement if any in ground floor. As per relevant IS Code. A) Pakur Variety |
| 20 | Construction of different dia Sluice valve /Air valve /Washout chamber in different sizes for village road where light traffic run and for main road where heavy traffic run as deptt.approved drawing with 25cm thick brick work (1:6) over cement concrete (4:2:1) over a single B/F soling over150mm.thick sand filling in foundation including earth work in excavation and disposal of excess earth from work site with RCC (1:1.5:3) cover slab 100mm / 150mm thick slab on top of chamber with 1% reinforcement in RCC cover slab with necessary opening for operation of valve all complete including cost of labour & materials as per Departmental Dwg. [Reinforcement type:- Other manufactuerers not specified]i) 80 mm to 150 mm dia pipe |
| 21 | Providing FHTC from the existing Cl/Dl/uPVC/HDPE/Gl/AC distribution pipeline by installing 10 mm NB Gun-metal Ferrule conforming to IS 2692:1989 with latest amendments on the said pipeline with supply, fitting & fixing of all other accessories like saddle piece of required size to fit the existing distribution pipeline, specials, nut & bolts, rubber sheet, washers etc and supply & laying of 15mm NB PVC (schedule 80)/20mm OD HDPE (PEIOO, PN16) pipe (average 15m length) with all necessary specials 1.0 metre below the ground connecting the ferrule including cutting trenches in all sorts of soil and filling up trenches as per direction of the Engineer-in-charge and upto a point just inside the premises of the household or as directed by EIC. Supply and installation of a 15mm dia. alloy iron Bib Cock (tested to 21 Kg/cm2) above 1.0 Mtr. from ground, an alloy Stop Cock of 15 mm dia. with brass spindle (tested to 21 Kg/cm2) to be fitted in a position as directed by E.I.C. G.l pipe of TATA make (medium duly) of 2 metre length with all necessary specials to continue from the end of the HDPE/PVC pipe and upto 1.0 m above ground within the premises of household.Note : 1. PVC pipe shall of schedule 80 (medium duty) conforming to ASTMD-1785 and threaded to match with GI pipe as per IS: 1239(part-I).2. Rate is exclusive of supply and delivery of 10mm NB Gun metal Ferrule.3. Payment of supply and laying of 15mm dia NB PVC (Schedule 80) or 20mm OD HDPE (PE 100, PN 16)pipe with all necessary specials 1.0m below the ground will be made on actual measurement basis. The rate of this item is Rs. 117/-per metre.a)Upto 10m length |
| 22 | b)Above 10m upto 20m length |
| 23 | Colection of Household details as per prescribed format through Mobile app/Hard copies including Geo referance as diected by E.I.C and submission of the same to the P.H.E Dte.in soft copies. |
| 24 | Add GST @18% on sum of Item No. 1 to 23 |
| 25 | Add Cess @1% on sum of Item No. 1 to 24 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender