Tender For Construction Of Office Chambers For Hmic And Hmos Of Msme & Textiles Department___ Electrical Installation Works
Tender Value
15.42 Lakhs
Estimated cost
Bid Submission
27 Oct 2026
18 days left
EMD
30849
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Chambers For Hmic And Hmos Of Msme & Textiles Department___ Electrical Installation Works
BOQ
| Sl. No. | Item Description |
| 1 | Disconnecting the power flow through existing electrical arrangements & dismantling charges for the existing old electrical installations like LED lights, Wires and mending goods the damages using co's own tools, tackles and necy. arrangements by 1 No. Semi-Skilled and 2 No. Unskilled labour for 1 Day. |
| 2 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) (Make: Legrand/L&T/ABB) |
| 3 | (i) 4 way (4 + 12), Double door |
| 4 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. (Make: Legrand/L&T/ABB) |
| 5 | (i) 125 A,36KA,FPMCCB |
| 6 | Supplying and fixing 415 V, 63 A TP MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.(Make: Legrand/L&T/ABB) |
| 7 | Supplying and fixing following 4 way (4+12), Double door horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. S&F four pole, 415 V, 63 A isolator as incomer and 12 Nos. 5 A to 32 A rating, 240 V, Single pole 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load as outgoing complete with connections, testing and commissioning etc. as required. (Make: Legrand/L&T/ABB) |
| 8 | Supplying and fixing 12 way, Double door single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. S & F double pole, 240 V, 40 A isolator as incomer, 10 Nos. 5 A to 32 A rating, 240 V, Single pole 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load as outgoing complete with connections, testing and commissioning etc. as required. (Make: Legrand/L&T/ABB) |
| 9 | Supplying, installation, Testing & Commissioning of 8 - 10 Watt LED Recessed/ surface Down lighter (Round/ square/ Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim with Aluminium Reflector. (Make: Philips / Crompton/Wipro) |
| 10 | S & F of 240V, 28 Watt, 5 meter length LED chain light having 72 Nos. LED per meter with LED driver. (Make: Philips Linea Bright (72 LED /Mtr) / Eqv. Crompton/Wipro) |
| 11 | S & F 240V, Decorative type E27 lamp base Single Head Wall Bracket fittings incl. S & F 240V, 9W E27 Warm White LED Lamp. (Make: Philips 31425 Muziris Single Head Wall Light/Crompton/Wipro) |
| 12 | S & F of 220 - 240V, 10 Watt in built LED mirror light having lumen eficacy of minimum 100 lm/Watt and total lumen output of 1000 lm, IP44 rating ensures protection from dust and moisture. (Make: Philips 919215851240/Crompton/Wipro) |
| 13 | Supplying, installation, Testing & Commissioning of 36 W Panel light 2x2 ft., of Powder coated die cast / Extruded aluminium Body (Thickness > 1.20 mm) material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (Make: Philips / Crompton/Wipro) |
| 14 | Supplying, installation, Testing & Commissioning of LED Recessed / surface Down lighter (Round / square / Rectangular) SMD type of Powder coated die cast / Extruded aluminium Body including trim material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), life time of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (Make: Philips / Crompton/Wipro) |
| 15 | 12 - 15 Watt |
| 16 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. |
| 17 | Supply & Delivery of 230 V, 50 Hz, single phase, 85 watts, 18\\" (450mm), speed 1325 rpm (minimum), Bracket Fan and class of insulation: B, 4 nos. metal (Aluminium alloy) blades, copper winding, steel/Al body with metal back cover. Power Factor not less than 0.9 and minimum air delivery 110 cu.m/min (minimum), including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required.(Make- Havells/Crompton/Usha) |
| 18 | Supply & delivery of 230 V, 50 Hz, single phase, 40 watts , 9\\" (230 mm) Sweep, speed 1350 rpm (minimum), A.C. Exhaust Fan and class of insulation: B, 3 nos. metal (Aluminium alloy) blades, copper winding, steel/Al body. Power Factor not less than 0.9 and minimum air delivery 650 cmh (minimum) including capacitor with safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for compliant to IS 374:2019 and external connections with 1.5 sq.mm FR, PVC insulated copper conductor single core cable and earthing etc. as required.(Make- Havells/Crompton/Usha/EPC) |
| 19 | Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 20 | Upto 450 mm sweep |
| 21 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 22 | Supply & Installation of water geyser 240V, 10 Ltr. Storage Capacity, 4 Star rated, 2KW, having tank for long life and corrosion free performance. (Make: Venus Lyra/ AO Smith Xpress/ Bajaj Shield Series Immorto) |
| 23 | Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. |
| 24 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). (Make: Legrand/L&T/ABB) |
| 25 | S & F 240 V, 3 Nos. 3 pin 5/6 A & 1 No. 6 pin 15/16 A Modular type socket outlet with 3 Nos. 5/6 A & 1 No. 15/16 A Modular type switch on 12 Module (200mm x 150mm) GI box along with modular base & cover plate complete with 2 No. suitable size \\"Ph & N\\" copper bar and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand/L&T/ABB) |
| 26 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Make: Legrand/L&T/ABB) |
| 27 | S & F 240 V, 1 No. 3 pin 5/6 A & 1 No. 6 pin 15/16 A Modular type socket outlet with 1 No. 5/6 A & 1 No. 15/16 A Modular type switch on 6 Module (200mm x 75mm) GI box along with modular base & cover plate complete with 2 No. suitable size \\"Ph & N\\" copper bar and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand/L&T/ABB) |
| 28 | S & F 240 V, 1 No. 6 pin 15/16 A Modular type socket outlet with 1 No. 15/16 A Modular type switch on 2 Module (75mm x 75mm) GI box along with modular base & cover plate making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand/L&T/ABB) |
| 29 | S & F 2(+1) Module IP-65 rated waterproof cabinet (Legrand Plexo) on wall including necessary accessories with S&F 240V, 63A DP MCB isolator incl. necy. connections, socketing etc. as per direction of EIC. (Make: Legrand/L&T/ABB) |
| 30 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box / wooden block including connections etc. as required. |
| 31 | Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 32 | Group C |
| 33 | Wiring for circuit / submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable (Make: Polycab / KEI / Gloster / Havells) in surface / recessed medium class PVC conduit as required. |
| 34 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 35 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 36 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 37 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 38 | 2 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 39 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 40 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm |
| 41 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm |
| 42 | 2 X 4 sq. mm + 1 X 4 sq. mm |
| 43 | 2 X 10 sq. mm + 1 X 6 sq. mm |
| 44 | 2 X 16 sq. mm + 2 X 6 sq. mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender