Housing Urban and Rular Development Government Departments Closing in 7 days TDR #57910039

Tender For Construction Work In Amethi District-Including A 2X6m Reinforced Cement Concrete Box Culvert Over The Local Drain Between Dihwa And Saraiya Duban, Approach Roads, Additional Approach Roads, Land Acquisition, And Protective Works

Issued by Government Departments · Sultanpur, Uttar Pradesh
Tender Value
2.05 Crore
Estimated cost
Bid Submission
15 Oct 2026
7 days left
EMD
12.25 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Sultanpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Work In Amethi District-Including A 2X6m Reinforced Cement Concrete Box Culvert Over The Local Drain Between Dihwa And Saraiya Duban, Approach Roads, Additional Approach Roads, Land Acquisition, And Protective Works

BOQ

Name of Work:- Construction work in Amethi district—including a 2x6m RCC box culvert over the local drain between Dihwa and Saraiya Duban, approach roads, additional approach roads, land acquisition, and protective works
Sl. No. Item Description
1Excavation for Structures Mechanical Means (Depth upto 3 m) Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.
2Sand Filling in Foundation Trenches as per Drawing & Technical Specification.
3Construction of Granular sub base by providing well graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and complacting with smooth wheel roller to achieved the desired density. complete as per clause 401.
4Plain/Reinforced Cement Concrete in Open Fondation complete as per Drawing and Technical Specifications.PCC Grade M15
5Plain/Reinforced Cement Concrete in Open Fondation complete as per Drawing and Technical Specifications.RCC Grade M25
6Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications. As per MORT&H Specification no. 12.42
7Plain/Reinforced cement concrete (RCC M-30) in sub-structure complete as per drawing and Technical Specifications. As per MORT&H Specification no. 13.05
8Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications. As per MORT&H Specification no. 13.06 for wall
9Furnishing and Placing Reinforced/ Prestressed cement concrete (RCC M-30) in super-structure as per drawing and Technical Specification. As per MORT&H Specification no. 14.1C Case II
10Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications. As per MORT&H Specification no. 14.2 Slab and parapet
11Reinforced cement concrete approach slab including reinforcement and formwork complete as per drawing and Technical specification
12Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications, all complete as per clause 2702. As per MORT&H Specification no. 14.4
13Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. As per MORT&H Specification no. 13.8
14Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical Specification.
15Approach Raod And Add. ApproachClearing Jungle including uprooting of trunk vegetations grass bush and sapling of girth upto 30 cm. At a height of one meter above ground level and removal of rubbish up to a distance of 50 mtr. Outside the periphri of area cleared.
16Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 50 m as per Technical Specification Clause 303.1
17Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.,with lead upto 3000 m ( carted earth )
18Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.
19Providing, laying and spreading Material on a prepared sub grade, adding cement @ 2% by weight to the spread material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base.
20Providing, laying and spreading Material on a prepared sub grade, adding cement @ 4% by weight to the spread material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base.
21Providing and laying Bituminous primer coat over granular surface with slow setting bituminous emulsion @ 7.50 kg per 10 sqm complete as per technical specification clause 502 including all cost of all material, labour, T&P etc.
22Providng and applying tack coat with bitumen Vg-10 using emulsion pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous /granular surface cleaned with machanical broom.
23Providing, laying and rolling of open graded primix surface of 20 mm thickness composed of 13.2 mm to 5.6 mm girt @ 0.27 cum per 10 sqm aggregate using VG 10 bitumen to required line, grade and level to serve as wearing course including mixing of material in a mixall and rolling with a smooth wheeled roller 8-10 tonne capacity finished to required level and gared including cost of VG 10 stone grit, labour, T&P and all taxes, royalty, etc, complete.
24Providing and laying of premix seal coat sealing the void in a bitumenous surface laid to be specified levels, grade and cross fall using Type C grade as per technical specification clause SL No. 5.12 B case III MORD 510 including cost VG 10 stone grit, labour, T&P and all taxes royalty etc. complete.
25Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 50 m as per Technical Specification Clause 303.1
26Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2.,with lead upto 3000 m for making patri with carted earth
27Construction of HP culvertsEarth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 2.1.1 All kinds of soil. 2.6.1
28Supply Of RCC Hume Pipes NP-3 1000 mm dia Hume Pipe as Per Direction Of E/I.
29Laying & fixing of 1000 mm dia NP-3 pipe with collers As per SOR Chapter-17
30Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm (nominal size) 4.1.6
31Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 6.1.1
32Pointing on tile brick work with cement mortar 1:3 (1 cement : 3 fine sand): Flush/ Ruled/ Struck or weathered pointing 13.32.1
33Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering and shuttering and finishing 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm (nominal size) 4.4.1
34Mild steel or iron in plain work such as reinforeed concretc or reinforeed brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of ass steel and wastage and over lapping & hooks. S.I. 504.
35Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification
36Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications
37Providing and erecting a \\"W\\" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57910039
AUTHORITY Government Departments
TENDER VALUE 2.05 Crore
LAST DATE 15-10-2026
Authority
Authority Name Public Works Department
Work Description Tender for Construction Work In Amethi District-Including A 2X6m Reinforced Cement Concrete Box Culvert Over The Local Drain Between Dihwa And Saraiya Duban, Approach Roads, Additional Approach Roads, Land Acquisition, And Protective Works
Basic Detail
Tender No 3311/1com-Sul.A.Cir./2026-27 Dt 23.09.2026
Bidding Type Tender
Location
City Sultanpur
State Uttar Pradesh
Key Dates
Publish Date 07 Oct 2026
Submission Date 15 Oct 2026
Open Date 15 Oct 2026
Finance
Tender Value 2.05 Crore
Tender Fee 2714
EMD 12.25 Lakhs
Exemption Available
Document List
BOQ_2253896.xls
e609af67-0ca3-4fed-9c2d-9a5a88fea918.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 07, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 15, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 7 days
Oct 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_2253896.xls

html

e609af67-0ca3-4fed-9c2d-9a5a88fea918.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders