Tender For Providing And Fixing Of Fire Fighting System In Training Institute For The Promotion Of Female Literacy (Rusa Building) Sector-42, Chandigarh.
Tender Value
7.41 Lakhs
Estimated cost
Bid Submission
14 Oct 2026
6 days left
EMD
14836
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Fixing Of Fire Fighting System In Training Institute For The Promotion Of Female Literacy (Rusa Building) Sector-42, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing in position industrial type pressure gauges with gun metal / brass valves complete etc. as required. .30.8 |
| 2 | Make:- H Guru/Fiebig/Emerald . |
| 3 | (a) Supplying, installation, testing andcommissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in allrespects, as required: (Terrace Pump) .27.4 |
| 4 | (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. . |
| 5 | (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018. . |
| 6 | (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. . |
| 7 | (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. . |
| 8 | 450 lpm at 35 m Head .27.4.2 |
| 9 | .PIPES & VALVES |
| 10 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : .27.7 |
| 11 | Make:- Tata/ Jindal(Hisar), / Surya Parkash . |
| 12 | 25 mm dia. .27.7.1 |
| 13 | 80 mm dia. .27.7.6 |
| 14 | 100 mm dia. .27.7.7 |
| 15 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Make: OMEX/PADMINI/GETECH .27.9 |
| 16 | Single headed stainless steel .27.9.2 |
| 17 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : .27.11 |
| 18 | 80mm dia. .27.11.4 |
| 19 | Make:- Kartar/Sant/Zoloto . |
| 20 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : .27.14 |
| 21 | 80 mm dia. .27.14.4 |
| 22 | Make :- Kirloskar/ Audco/ Zoloto/ Advance . |
| 23 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : .27.16 |
| 24 | Stainless Steel (Grade 304) .27.16.2 |
| 25 | Make : Kartar/Newage/Safeguard . |
| 26 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. .27.17 |
| 27 | 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 . |
| 28 | 20 mm nominal internal dia gun metal globe valve & nozzle. . |
| 29 | Drum and brackets for fixing the equipmets on wall. . |
| 30 | Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket & flanges. . |
| 31 | 30 m .27.17.1 |
| 32 | Make : Kartar/Newage/Safeguard . |
| 33 | Supplying & fixing 63 mm dia short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : .27.18 |
| 34 | Stainless Steel (Grade 304) .27.18.2 |
| 35 | Make : Kartar/Newage/Safeguard . |
| 36 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : .27.19 |
| 37 | 2 way-150 mm dia M.S. Pipe .27.19.2 |
| 38 | Make : Kartar/Newage/Equivalent . |
| 39 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. .27.2 |
| 40 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. .27.22 |
| 41 | Make :- Danfoss/Infoss . |
| 42 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .DSR 2023 CIVIL 6.1 |
| 43 | Cement mortar 1:6 (1 cement : 6 coarse sand) .6.1.2 |
| 44 | 12 mm cement plaster finished with a floating coat of neat cement of mix : .13.7 |
| 45 | 1:4 (1 cement: 4 fine sand) DSR 13.7.2 .13.7.2 |
| 46 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall .18.1 |
| 47 | 40 mm dia nominal bore DSR 18.10.5 .18.10.5 |
| 48 | Providing and fixing gun metal gate valve with quality (screwed end): .18.17 |
| 49 | 40mm nominal bore DSR 18.17.3 .18.17.3 |
| 50 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : .18.18 |
| 51 | 25 mm nominal bore DSR 18.18.3 .18.18.3 |
| 52 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : .18.46 |
| 53 | 40 mm nominal bore DSR 18.46.5 .18.46.5 |
| 54 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR 18.48) 5 Nos. x 5000 Ltrs. .18.48 |
| 55 | Cutting holes up to 30x30 cm in walls including making good the same: .18.76 |
| 56 | With common burnt clay F.P.S. (non modular) bricks .18.76.1 |
| 57 | Construction of Additional UGR/Sump of 1.00 Gallons Capacity . |
| 58 | Supplying, laying, testing and commissioning of MS made cubicle panel made out of 1.6mm CRCA sheet powder coated with siemens color. The panel is design for wall mounting type with cable incoming and out goings from bottom. All the switchgear are from L&T /Schneider/Eaton Make MCB TP 32A, Contractor MNX-12A., Over load relay 4.5-7 5A, ON/OOF indication, STOP/START Push Button, Auto/Manual Switch, Terminal STRIP, MBC 1 POLE 6 Amp, Aux. Cont., SDS Timer, SPPR, Enclosure & accessories fabrication in 1.6mm. CRCA Sheet powder coating in Siemens Gray Shede, 75X40MM. Channel Base Frame, Cable Entry will be Top & Bottom Suitable for Cable Lock, Rubber Gasket, hardware etc. Wiring & Accessories Power & Control wiring will be (ISI 1100V) flamo smoke FRLS PVC Singte Core Copper Wire Copper Lugs, PVC Steeve, Ferruels Numbers, Hardware & Lbour etc. including Starter suitable for 7.5 Hp mortor for 2 pump which can be operate simultaneously. .NSR |
| 59 | Providing and fixing of M.S Girder of size 200 x 100mm for making platform for PVC tanks with 2 coats of paints after 1 coat of primer complete in all respects. .NSR |
| 60 | Supplying, installation, testing and commissioning of weather proof M.S cabinet size 600 mm x 600 mm x 450mm deep fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx 6mm complete with glass, locking arrangements to accommodate the following: - .NSR |
| 61 | SS single headed Hydrant valve - 1 No. . |
| 62 | Fire Hoses 63mm, 15 M long with accessories - 1 Nos. . |
| 63 | Short branch - 1 No. . |
| 64 | The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade. . |
| 65 | Providing and fixing of M.S sheet of 5mm thick for making platform for pvc tank with 2 coat of paints after 1 coat of primer complete in all respects .NSR |
| 66 | Providing and fixing of Stored Pressure (ABC Dry Chemical Powder ) type Fire Extinguisher of Capacity 6 kg Confirms to IS 15683, bearing ISI mark complete with brass forged squeeze grip type valve fitted with pressure gauge , pressurize with dry Nitrogen gas filled, with discharge nozzle with wall mounting bracket, having fire rating of 2A & 21B. Make:- Padmini/SAFEX/MINIMAX. .NSR |
| 67 | Providing and fixing of CO2 type Fire Extinguisher of capacity4.5 kg (6.8 Litre) confirming to IS 15683 duly bearing ISI mark, consisting of High Pressure (IS 7285) and duly approved by Chief controller of Explosive Nagpur, fitted with wheel type valve, fully charged with CO2 gas (IS 15222), with non-conductor of electricity discharge PVC horn along with Bend Pipe, internally siphon tube, & mounting brackets having fire rating as required to the entire satisfaction of EIC . Make:- safex/minimex .NSR |
| 68 | Supplying, installing, testing and commissioning of FR PVC round seathed copper cable flexible 1100 volts conforming to IS 694 of make Havells/Finolex/ICL/Gloster/CCI/Grandley .NSR |
| 69 | 2C x 4 Sqmm from panel to pressure switch . |
| 70 | 3C x 4 Sqmm from panel to motor . |
| 71 | 4C x 6 Sqmm from main to panel . |
| 72 | Supplying & Fixing of Battery Operated Auto Glow LED Exit Signs Board of size 18” x 6” complete in all respect. (Extra payment will be made is electrical point required) .NSR |
| 73 | Supplying and installing of 3 nos. set of Fire Buckets of 24 gauge galvanized steel sheet, standard 9 liter capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “Fire” in black and gold. .NSR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysOct 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender