Tender For Renovation Of Toilets And Washrooms In C- Type Houses In Panjab University C Us Sector-14 & 25, Chandigarh.
Tender Value
23.14 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
25 days left
EMD
47000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Toilets And Washrooms In C- Type Houses In Panjab University C Us Sector-14 & 25, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 5 km for all lifts, complete as per directions of Engineer-in-charge. (Ref:-1.1.18) |
| 3 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement : |
| 4 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (Ref:-5.2.3) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 6 | Suspended floors, roofs, landings, balconies and access platform. (Ref:-5.9.3) |
| 7 | 12 mm cement plaster of mix : |
| 8 | 1:6 (1 cement: 6 fine sand) (Ref:-13.1.2) |
| 9 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 10 | New work (two or more coats) over and including priming coat with cement primer. (Ref:-13.41.1) |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 12 | Two or more coats on new work (Ref:-13.61.1) |
| 13 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 14 | 1:4:8 or leaner mix (Ref:-15.2.2) |
| 15 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 16 | Of area 3 sq. metres and below (Ref:-15.13.1) |
| 17 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 18 | 15 mm to 40 mm nominal bore (Ref:-15.44.1) |
| 19 | Dismantling of flushing cistern of any size including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (Ref:-15.52) |
| 20 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (Ref:-15.56) |
| 21 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 22 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. (Ref:-17.1.1) |
| 23 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 24 | W.C. pan with ISI marked white solid plastic seat and lid (Ref:-17.2.1) |
| 25 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : |
| 26 | White vitreous china wash basin size 550x400 mm with a pair of 15mm C.P. brass pillar taps (Ref:-17.7.3) |
| 27 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (Ref:-17.31) |
| 28 | Providing and fixing soil, waste and vent pipes : |
| 29 | 100 mm dia. |
| 30 | Sand cast iron S&S pipe as per IS:3989 (Ref:-17.35.1.2) |
| 31 | Providing and fixing soil, waste and vent pipes : |
| 32 | 75 mm diameter : |
| 33 | Sand cast iron S&S pipe as per IS:3989 (Ref:-17.35.2.2) |
| 34 | Providing and fixing plain bend of required degree. |
| 35 | 100 mm dia |
| 36 | sand cast iron S& S as per IS-3989 (Ref:-17.39.1.2) |
| 37 | Providing and fixing heel rest sanitary bend |
| 38 | 100 mm dia |
| 39 | sand cast iron S& S as per IS-3989 (Ref:-17.40.1.2) |
| 40 | Providing and fixing heel rest sanitary bend |
| 41 | 75 mm dia |
| 42 | sand cast iron S& S as per IS-3989 (Ref:-17.40.2.2) |
| 43 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : |
| 44 | 100x100x100x100 mm |
| 45 | Sand cast iron S&S as per IS - 3989 (Ref:-17.41.1.2) |
| 46 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : |
| 47 | 75x75x75mm |
| 48 | Sand cast iron S&S as per IS - 3989 (Ref:-17.41.2.2) |
| 49 | Providing and fixing sand door piece, insertion rubber washer 3mm thick, bolts & nuts complete: |
| 50 | 100mm |
| 51 | Sand cast iron S&S as per IS - 3989 (Ref:-17.55.1.2) |
| 52 | Providing and fixing sand door piece, insertion rubber washer 3mm thick, bolts & nuts complete: |
| 53 | Sand cast iron S&S as per IS - 3989 (Ref:-17.55.1.2) |
| 54 | Providing and fixing collar: |
| 55 | 100 mm |
| 56 | Sand cast iron S&S as per IS - 3989 (Ref:-17.57.1.2) |
| 57 | Providing and fixing collar: |
| 58 | 75 mm |
| 59 | Sand cast iron S&S as per IS - 3989 (Ref:-17.57.2.2) |
| 60 | Providing lead caulked joints to HCI pipes in sand cast iron/ centrifugally cast (spun) pipes and fittings of diameter: |
| 61 | 100 mm dia (Ref:-17.58.1) |
| 62 | 75 mm dia (Ref:-17.58.2) |
| 63 | Providing and fixing C.I. floor trap with CP grating complete, including cost of cutting and making good the walls and floors : |
| 64 | 100 mm inlet and 75 mm outlet |
| 65 | Sand Cast Iron S&S as per IS- 3989 (Ref:-17.60.2.1) |
| 66 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall |
| 67 | 15 mm dia nominal bore (Ref:-18.11.1) |
| 68 | 20 mm dia nominal bore (Ref:-18.11.2) |
| 69 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 70 | 20 mm nominal bore (Ref:-18.17.1A) |
| 71 | Providing and fixing P.V.C. connection pipe with Brass C.P. Nuts collar and bush. |
| 72 | 15 mm nominal bore with 45cm length. (Ref:-18.21.2.1) |
| 73 | Providing and fixing G.I. Union in G.I. pipe line, cutting and threading the pipe and making long screws including making good the same complete. |
| 74 | 15 mm nominal bore. (Ref:-18.46.1) |
| 75 | 20 mm nominal bore. (Ref:-18.46.2) |
| 76 | Providing and fixing CP brass bib cock of 15mm dia(long body) and S.S. flange.(wt. 600 grms).Complete (Ref:-18.51.1) |
| 77 | Providing and fixing C.P. brass stop cock (concealed) with caps including SS flange. Complete in all respect to the entire satisfaction of the engineer in-charge. |
| 78 | 15 mm nominal bore (Ref:-18.52.1) |
| 79 | Providing and fixing ball cock (brass) with alkathin ball. |
| 80 | 20 mm nominal bore (Ref:-18.62.2) |
| 81 | Cutting holes up to 30x30 cm in walls including making good the same:(With F.P.S. bricks) (Ref:-18.76.1) |
| 82 | Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete: |
| 83 | 100mm diameter (Ref:-19.1.1) |
| 84 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand ) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 85 | For pipes 100 to 230 mm diameter (Ref:-19.21.1) |
| 86 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1cement : 5 fine sand : 10 graded stone aggregrate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand ) finished smooth with floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 87 | Inside dimensions 455x610 mm and 45 cm deep for single pipe line: |
| 88 | With F.P.S. bricks (Ref:-19.30.1.1) |
| 89 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 of approved make in all colours, shades except burgundy, bottle green, black of size 200x300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Complete in all respect to the entire satisfaction of the engineer in-charge. (Ref:-N.S.) |
| 90 | Providing and laying anti skid matt finished floor tiles 300x300 mm of 1st quality conforming to IS : 15622 of approved make in all colours, shades, except White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete.(Ref:-N.S.) |
| 91 | Providing and fixing on terrace (at all floor levels) polyethylene water storage tank ISI marked with cover and suitable locking arrangement and including G.I. tank nipple size of 20 mm dia , inlet, outlet and overflow connection with base support for tank.(Ref:-N.S.) |
| 92 | Providing and fixing CP brass bib cock (Short body) and S.S. flange. (wt. 600 grms)(Ref:-N.S.) |
| 93 | Providing and fixing C.P. brass Angle cock with cap with and S.S. flange (15mm dia). Complete in all respect as per instruction of the Engineer-in-Charge. (Ref:-N.S.) |
| 94 | Providing & laying P.C.C. 1:8:16 (1 Cement : 8 coarse sand: 16 coarse aggregate)with stone ballast 32mm guage in foundation and plinth. Complete in all respect to the entire satisfaction of the Engineer-in-charge.(Ref:-N.S.) |
| 95 | Removal of water closet (W.C.) chinaware. complete as per entire satisfaction of the E.I.C.(Ref:-N.S.) |
| 96 | Providing and fixing in position M.S. Steel door manufactured from angle iron chowkhats 40 mm x 40 mm x 6mm and shutter frame 35mm x 35mmx 5mm along with 16 gauge of CRCA Sheet pressed to corrugation. Complete in all respect along with all necessary fitting such as iron hinges, sliding bolts, handles and screws etc. and finished with one coat of steel primer and two coats of approved synthetic enamel paint. Complete in all respect to the entire satisfaction of the Engineer-in-Charge.(Ref:-N.S.) |
| 97 | Providing and fixing in position 15mm C.P. Brass nipples as per entire satisfaction of the engineer-in-charge.(Ref:-N.S.) |
| 98 | Dismantling of over head PVC tank of 500/1000ltr capacity (of any size) including storage of useful and near the site and disposal of unserviceable materials within 50 metres lead.(Ref:-N.S.) |
| 99 | Providing and fixing Single socketed on wall face unplasticised Rigid UPVC pipe (6 kg per Sqcm pressure) of size 100mm dia conforming to IS : 13592 Type A, including jointing with necessary Tee and Bend conforming to IS : 5382, leaving 10 mm gap for thermal expansion. complete as per entire satisfaction of the Engineer-in-Charge. |
| 100 | 100 mmdia.(Ref:-N.S.) |
| 101 | Providing and fixing 32mm dia G.I. waste pipe along with elbow or bend. complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:-N.S.) |
| 102 | Providing and applying water proofing treatment in sunken/depressed portions consisting of two pack component of grey powder and white liquid in 2:1 ratio applied with 2 coats including all lead and lift up to any height. The work includes preparation of existing surface with complete cleaning. complete in all respects as per instructions of the engineer-in-charge.(Ref:-N.S.) |
| 103 | Providing & fixing factory made commercial flush shutter/door of 30mm thick ISI marked and lipped all around with hollock wood margin including Hollock wood chowkhats size 60mm x 90mm along with oxidized MS fittings i.e. handle, hinges, tower bolt including 22 gauge aluminium sheet fixed up to 4’ height on both sides and on thickness wise on shutter. Complete in all respects to the entire satisfaction of Engineer-in-Charge. (Ref:-N.S.) |
| 104 | Providing and fixing C.P. towel Ring complete with PVC rawl plug and CP Brass screws with concealed fittings of approved quality and colour.Complete in all respect to the entire satisfaction of the engineer-in-charge(Ref:-N.S.) |
| 105 | Providing and fixing C.P. brass shower 100mm Nominal bore with shower arm and S.S. flange, complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:-N.S.) |
| 106 | Providing and fixing square mouth C.I. gully trap grade 'A' complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300mm size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design: |
| 107 | 100x100 mm size P type(Ref:-N.S.) |
| 108 | With F.P.S. Bricks class designation 75(Ref:-N.S.) |
| 109 | Providing and fixing Jet connection alongwith 450mm long pipe for water closet. Complete in all respect to the entire satisfaction of the engineer-in-charge.(Ref:-N.S.) |
| 110 | Providing & Laying Half Brick masonry work with F.P.S. bricks of class designation 100 in superstructure above plinth level upto floor V level. complete in all respect to the satisfaction of the engineer in charge.Cement Mortar 1:4 (1cement :4 coarse sand)(Ref:-N.S.) |
| 111 | Electrical work |
| 112 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 113 | Group A (Ref:-1.8.1) |
| 114 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required. |
| 115 | 1 x 1.5 sq. mm (Ref:-1.17.1) |
| 116 | 3 x 2.5 sq. mm(Ref:-1.17.12) |
| 117 | 3 x 4 sq. mm(Ref:-1.17.21) |
| 118 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recess including painting in case of surface conduit , or cutting the wall and making good the same in case of recessed conduit as required |
| 119 | 25mm(Ref:-1.21.2) |
| 120 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 121 | 5/6 amps switch(Ref:-1.23.1) |
| 122 | 3 pin 5/6 amps socket outlet (Ref:-1.23.4) |
| 123 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. (Ref:-1.30) |
| 124 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.(Ref:-1.33) |
| 125 | Supply and erection of Bakelite Holder ( Large size) complete in all respect to the entire satisfaction of the Engineer-in-charge(Ref:-N.S.) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 25 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender