Tender For Municipal Council Banswara Supply Installation Testing and Commissioning of Traffic Signal Light At Maharana Pratap Circle Banswara
Tender Value
19.40 Lakhs
Estimated cost
Bid Submission
20 Oct 2026
11 days left
EMD
38800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Banswara → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Municipal Council Banswara Supply Installation Testing and Commissioning of Traffic Signal Light At Maharana Pratap Circle Banswara
BOQ
| Sl. No. | Item Description |
| 1 | supply and erection fo galvaznixed iron pole to ve used as traffic singal pole with gaivanizing done in single dipping (Average coating thickness miminum 65 Microns) tapened poles having octagonal /circular cross-s-sections designed to withstand the maxmimu wind speed as pre IS 875,The Pole shaft shall be made form sheet steel (HT steel Conforming to grade S 355JO)and confirmng to BSEN 10025 and shall be continuously tapered with single longitudinal welding there shall not be any cirumferential welding.the welding fo pole shaft shall be done by submerged ArC welding (SAW) procees .pole shafts shalla be provied with the rigid flange plate of suitabel thickness(FE 410 conforming to IS 226/IS 2062 with provision for 4 no foundation bolts this base plate shall be fillet welded to the pole shaft at two locatiosn I.E from inside and outside.the octagonal poles shall have lockabel door of approximate 500 mm length at the elevation of 500 mm from the base plate whit bakelite sheet hvaing 6A SP MCB and 16 sqmm stud type connector (4nos) inside the pole at door openign for cable connecton of following length and dimension asper table P-01 with base plate and foundation bolt on the Existing cement concrete foundation .All ap per approved by Engineer in Charge.for additional technical parameters fo products/workrefer annexure \\"A\\" Attached with this BSR. Poles with OCtagonal Cross Section 9 MTR |
| 2 | S.I.T.C. of programmable three digit digital countdown timer with 5mm dia. Red colored LEDs of high intensity (visible clearly at day time) of reputed make with digit size 150mm x 300mm approx. and quantity of LEDs be approx. 800 no.s including interconnection with traffic signal controller and housing the LED assembly in sheet metal box of size approx. 750mm x 550mm with detachable pole arms clamps etc. as required. |
| 3 | S & Laying following size ‘B’ Class G.I. Pipe confirming to IS: 1239 P-1 (1990) with accessories for laying earth conductor/ strip/ cable in ground/ surface/ recess as50 mm dia. |
| 4 | S.I.T.C. of following colour retrofit LED matrices traffic light of modular size 300 mm dia, Covered with front clear acrylic sheet and back with aluminum body, InP/InGaN based 5mm dia. Coloured LEDs of ultra bright. Super intensity (visible clearly at day time up to distance 300-600 meter, viewing angle of 30 degree). The unit shall be suitable for working on A.C. supply (160-240 V) and life cycle approx. 10 yrs with power consumption below 24watts, suitable for fast switching.Red Round (unit of 200-220 Nos LEDs) |
| 5 | Amber Round (unit of 200-220 Nos LEDs) |
| 6 | green Round (unit of 200-220 Nos LEDs) |
| 7 | Green Arrow (Unit of 120-130 Nos LEDs) |
| 8 | Add extra for SITC of M.S. housing for LED matrices |
| 9 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Un-armoured Copper cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray (with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediated Laboratory for testing procedure as per IS:10810 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 2.5 Sq. mm*4 core |
| 10 | SITC of microprocessor based logic type automatic electronic controller conforming to IS:7537 for traffic signals complete with electronic timer , control board, blinker unit for night operation and slip lane, day time peak hour operation, The controller shall have 12 Signal phases, 25 Signal plan, 24 cycle plan, 24 Signal split/ cycle, 4 Day plan, 32 Cycle switching/ day, 20 Selective Day plan/ annum, 16 Conflicting condition, 28 Signal Line, Solid-state relay switching, RS 422 Communication interphase, Manual override facility, up gradable vehicle actuated system, also have method of traffic control with fixed time isolated intersection and cable less/ cabled interlinking for synchronised operation. The controller unit shall be totally enclosed in 1.6 mm thick metal box including making |
| 11 | Supplying and drawing PVC insulated & sheathed solid/ stranded copper conductor multi core control cable ISI marked (IS:1554) of 1.1 kV grade of approved make as per chapter E11,in existing surface or recessed conduit/ casing capping including making connections etc. as required 2.5 sq. mm. armoured 8 core |
| 12 | P / L of Double wall corrugated HDPE pipe confirming to IS : 16205 P-24, Stiffness Class 750 N, Externally corrugated and having smooth surface inside with HDPE Coupler, Elbow, Tee at required Depth below the ground for laying cable of following Nominal Outerdia. MFR Test report from NABL accrediated is to be submitted.(Excavation of Earth & Back filling with compaction is to be Paid Extra)All as per pre approved by Engineer in-charge. For additional technical parameters of products/ work , refer Annexure\\"A\\" attached with this BSR 110 mm |
| 13 | Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing including cost of cutting, bending, welding etc. The frame work shall be supported in wall with the help of MS brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of size 300x230x300mm including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding the steel work will be given a priming coat of \\"ZINC\\" primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes |
| 14 | Plate Earthling as per IS:3043 with copper Earth plate of size 600mm x 600 mm x 3.0mm by embodying 3 to 4 mtr. Below the ground level with 25 mm dia. G.I. ‘B’ class watering Pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, andC.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I Frame of size 300mm x 300mmcomplete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. |
| 15 | Pole Foundation for Octagonal pole from 7 Mtr. To 9 Mtr |
| 16 | Providing & Laying P.V.C. / XLPE insulated & P.V.C. sheathed Arrmoured Aluminium cable confirming to IS:1554 P-I / IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouringof cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. OEM must have it's own in house NABL accrediatedLaboratory for testing procedure as per IS:10810.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR 10.0 Sq. mm* 4 core |
| 17 | Add Extra for Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade direct in ground including excavation of trench of size 75 cm (Depth) x 35 cm(Width) , with procedure as per following points:- (a) Make a river sand bed of height 125 mm along the trench, (b) Lay the cable in the middle of the trench, (c) Provide river sand bed of height 125 mm on top of the cable, (d) Lay the protective Common burnt clay F.P.S. Bricks of Class designation 75 / Sand stone slabs of 50 mm thickness and 225 mm wide just above the sand bed vertically across the cable ( Approx. 9 no. Bricks per Mtr.), (e) Backfill the excavated soil leaving 300 mm from the Ground level, (f)Lay the Cable warning tape and again back-fill the remaining portion of the trench upto the ground level and compacting the earth |
| 18 | Add Extra in Item no.60.5 if Excavation done in Hard Rock / CC road / TAR Road and making Good the same Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysOct 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender