Tender For Construction Of Room(Mission Sakti Kendra) In Police Station Onccha
Tender Value
5.88 Lakhs
Estimated cost
Bid Submission
22 Oct 2026
3 days left
EMD
14000
Bank guarantee accepted
Document Fee
766
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mainpuri → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Room(Mission Sakti Kendra) In Police Station Onccha
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains inot exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all fift. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 2 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 4 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand 8 graded Stone aggregate 40 mm nominal size) and curing complete, including cost of form work, in foundation and floors. |
| 5 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement: 2 Coarse sand) to match the existing floor. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. |
| 6 | RCC work Providing and laying in position specified grade of reinforced cement concrete , including finishing and excluding cost of centering, shuttering, reinforcement - 1:1:5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) RCC works up to plinth level |
| 7 | RCC works above plinth level |
| 8 | Brick Work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 9 | 10 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 10 | 12 Steel Reinforcement for R.C.C. work including straightening, cutting, bening, placing in position & binding all complete upto plinth level or above plinth level. Thermo-mechanically. Treating bars of grade Fe-500D or more. |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (Double Leaf) |
| 12 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (Single Leaf) |
| 13 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) |
| 14 | Providing & Fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes |
| 15 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 Itr/10 sqm of approved brand and manufacture |
| 16 | Providing and fixing 150 mm bright finished floor brass door 18 stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete. |
| 17 | Providing and fixing ISI marked S.S. Sliding door bolts with 19 nuts and screws etc. complete |
| 18 | Providing and fixing ISI marked S.S. Tower bolts black finish, 20 (Barrel Type) with necessary screws etc. complete |
| 19 | Providing and fixing ISI marked S.S. handles conforming to IS 21 4992 with necessary screws etc. complete. 125mm |
| 20 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 Itr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture |
| 21 | 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) |
| 22 | 12mm thick plaster with cement mortar in proportion of 1:6 cement & coarse sand of 2.25 F.M. (1) 1 cement: 6 coarse sand |
| 23 | 26 Providing and fixing chicken wire mesh (Murga jali) in cement plaster over joints of R.C.C and brickwork. |
| 24 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to .S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm |
| 25 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 26 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 27 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two of lao Imore coats applied G 143 tr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 28 | 42 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 29 | ADD COST OF ELECTRIFICATION WORKS |
| 30 | ADD COST OF FIRE SERVICE WORKS |
| 31 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains inot exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all fift. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 32 | Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand 8 graded Stone aggregate 40 mm nominal size) and curing complete, including cost of form work, in foundation and floors. |
| 33 | RCC work Providing and laying in position specified grade of reinforced cement concrete , including finishing and excluding cost of centering, shuttering, reinforcement - 1:1:5:3 (1 cement : 1.50 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 34 | Brick Work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in: Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 35 | 12 Steel Reinforcement for R.C.C. work including straightening, cutting, bening, placing in position & binding all complete upto plinth level or above plinth level. Thermo-mechanically. Treating bars of grade Fe-500D or more. |
| 36 | 12mm thick plaster with cement mortar in proportion of 1:6 cement & coarse sand of 2.25 F.M. (1) 1 cement: 6 coarse sand |
| 37 | P/F CI TEE at the inlet and outlet |
| 38 | p/f 75 mm vent pipes DSR |
| 39 | P/F PRECAST RCC manhole coverof required shape 500mm internal dia DSR19.22.2.2 |
| 40 | Construction soak pit 1.2*1.2*1.2m filled with brick bats including SW drain pipe 100 mm dia and 1.2 m long Complete DSR 19.33 |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : DSR 17.2.1 |
| 42 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 17.7.2 |
| 43 | S/F CPVC Pipe 25mm dia. DSR 8638 |
| 44 | 15mm dia. DSR 8636 |
| 45 | S/F 110mm size pvc pipe ISI mark. 12.41.2 |
| 46 | S/F of 65mm dia PVC pipe ISI mark. 12.41.1 |
| 47 | S/F brass bib cock and stop cock including all complet. 15mm dia. |
| 48 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.(18.48 |
| 49 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore. |
| 50 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.(15 mm nominal bore) |
| 51 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 52 | Providing and fixing white viterous china squating plate urinal with integral rim longitudnal flush pipe DSR 17.24 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 22, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender