Tender For Provn Of Store Room At Station Hq Binnaguri, Provn Of Brick Wall Granite At Exit/Entrance Gate Of Stn Hq Binnaguri, Provn Of Chain Link Fencing, Ms Garage Gate, Brick Work Etc At New Stn Hq Binnaguri And Provn Of Compound Wall At Stn Hq Ne
Tender Value
35.24 Lakhs
Estimated cost
Bid Submission
28 Oct 2026
13 days left
EMD
70500
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Store Room At Station Hq Binnaguri, Provn Of Brick Wall Granite At Exit/Entrance Gate Of Stn Hq Binnaguri, Provn Of Chain Link Fencing, Ms Garage Gate, Brick Work Etc At New Stn Hq Binnaguri And Provn Of Compound Wall At Stn Hq Near Kripan Tcp Under Ge (S) Binnaguri
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 14-Oct-2026 | 8927_Tech | BOQ | 28-Oct-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Surfacing dressing n exc 15 cm deep in soft/ loose soil. |
| 2 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation and getting out in soft/loose soil. |
| 3 | M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete. |
| 4 | M&L Brick work with fly ash bricks, straight or curved on plan exceeding 6mtr mean raidus bulit in C:M 1:6 complete all as specified |
| 5 | M&L for Reinforced cement concrete ( Nominal Mix) 1:1.5:3, Type B-1, using 20 mm graded stone aggregate as in Foundations, including rafts,footings,foundation beams, plinth beams, bases for columns etc. and mass concrete complete all as specified |
| 6 | M&L for Reinforced cement concrete ( Nominal Mix) 1:1.5:3, Type B-1, using 20 mm graded stone aggregate as in Columns, pillars, piers, posts and struts etc. complete all as specified |
| 7 | M&L For Reinforcement cement concrete ( Nominal Mix) 1:1.5:3,Type B-1, ( 20 mm graded aggregate) as in beams,roof beams, lintel band, cantilever, bressummeres lintels over 1.50m spam complete all as specified |
| 8 | M&L for Reinforcement cement concrete ( Nominal Mix) 1:1.5:3,Type B-1, ( 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified |
| 9 | M&L for Reinforcement cement concrete ( Nominal Mix) 1:1.5:3,Type B-1, using 20 mm graded crushed stone aggregate as in Chajja complete all as specified |
| 10 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including flat rough finished surafaces of concrete complete all as specified |
| 11 | Formwork to sides of pillars, posts, struts, piers, columns, and stanchions, square, rectangular or polygonal in shape, including flat rough finished surafaces of concrete complete all as specified |
| 12 | Form work to sides and soffits of floor and roof beams, beams haunching, girders, bressummers, lintels and cantilever, shelves including supports over hangs etc rough finished surfaces of concrete ( flat ) complete all as specified |
| 13 | Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar works, flat rough finished surafaces of concrete; not exceeding 200mm thick (horizontal or sloping) |
| 14 | Formwork to edges of concrete flats, treads, , breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide rough finished surfaces of concrete. |
| 15 | Formwork to chullah hoods, chajjas, troughs & similar items including edges rough finished surfaces of concrete ( flat ) complete all as specified |
| 16 | M&L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified |
| 17 | M&L for Mild steel TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips all as specified |
| 18 | Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil. |
| 19 | Removing excavated soil n.exc 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point. |
| 20 | Spreading & leveling in layers n.exc. 25cm thick including well ramming including watering as required in floors |
| 21 | M&L for Sand filling under floors or in foundations including watering and consolidation |
| 22 | M&L Hardcore of guage exc63mm,Broken stone or boulder, deposited, spread & leveled in layers n exc. 15 cm thick, watered & rammed to a true surface |
| 23 | M&L for 100 mm thk PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in subbase to flooring. |
| 24 | M&L for 75mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and pavings laid in slope finished the surfaces even and smooth without using extra cement complete all as specified |
| 25 | M&L for PCC 1:3:6 type C2 using 20 mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel. |
| 26 | Extra for forming fair finished drain or channel 30 cm inner girth. |
| 27 | M&L for Machine cut kota stone in flooring 18-20 mm thick over and incl 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd all as spd |
| 28 | M&L for 18-20 mm thick Kota stone as in skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to kota stone including 10mm thick backing coat in cement mortar (1:4), all as specified |
| 29 | M&L Rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified |
| 30 | M&L for Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified |
| 31 | M&L for 20 mm thick rendering in cement mortar (1:4), on fair faces of brick work or concrete surfaces, in two layers, under coat of 10 mm thick & top of 10 mm thick, top layer 10 mm thick mixed with water proofing compound (200ml per 50kg of cement (cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified .(Note : Water proofing compound to be measured and paid separately as \\"Supply only) |
| 32 | Supply only liquid water proofing compound. |
| 33 | M&L three coats of white wash on surface of wall including preparation of new plastered surface complete all as spd |
| 34 | M&L for Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with cement based paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified |
| 35 | M&L three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as spd |
| 36 | S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe 410 -W (Gde-E- 250) quality- A complete complete all as specified. |
| 37 | S&F for 1.25 mm thick Mild steel, plain, black sheet in wall cladding,steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 38 | S&F for steel windows with side hung shutters glazed/gauged shutter incl both side openable (out side glazed window and inside fly proof window) including box type hinges with steel handle and steel peg stay complete with glazing bars and incl grill of approved design welded to steel window frame dovetailed or welded complete all as specified . ( Note: Guard bar or square bar shall be measured and paid separately.) |
| 39 | M&L for framed work such as grills, gratings, etc with ends of bars shouldered and or / forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 40 | M&L Preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces Complete all as specified |
| 41 | S&F for 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified |
| 42 | S&F for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 43 | M&L for providing cement concrete (1:2:4) type B-0 (using 12.5 mm size graded crushed stone aggregate) as in coping,filling to steel frames, haldfast etc set incl weathering, slightly rounded or chamfered angles & thickness complete all as specified. |
| 44 | M & L for water proofing treatment to RCC roof slab, including parapet comprising with the following of treatment/specification from bottom to top:-(i) Screed bed or bedding layer of mortar 10 mm thick in CM 1:4 mixed with water proofing compound @ 200ml per bag of cement or as per manufactures instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (ii) Applying bituminous primer at the rate of 0.4 Litres/Sqm on prepared surfaces of roof. Surface shall be kept free, till the primer is impregnated and the solvent oil in the primer get evaporated.(iii) Applying one coat of blown type bitumen of grade 85/25 as binding material at the rate of 1.2 Kg/Sqm.(iv) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.0 Kg/Sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturers instruction including preparation of surface.(v) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.Note :- The water proofing treatment shall be carried out by the manufacturer or his authorised applicators in terms of clause 11.43 of MES Sch Part-I (2009). |
| 45 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil |
| 46 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 47 | Supply only galvanized steel wire chain link fencing , including binding wire / line wire etc complete all as specified. (Note :- Size of mesh and dia of wire as approved or as per site requirement ) |
| 48 | Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails straining bolts, etc complete all as specified |
| 49 | S&F for Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanized mild steel pins etc., complete all as specified |
| 50 | S&F 10mm dia & over mild steel round or square bars fixed behind chain link fencing as guard bars etc and similar articles complete all as specified. |
| 51 | S&F mild steel screw bolt (machine made) with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm complete all as specified. |
| 52 | M&L for preparation of new steel surfaces n.exc 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 53 | Material and labour PCC type C1 (1:3:6) (using 20mm graded broken stone aggregate) in foundations, filling and mass concrete, fondation to fencing posts etc complete all as specified |
| 54 | M&L for Reinforced cement concrete (nominal mix) type B1, 1:2:4 (20mm garded aggregates) as in Beams, cntilever, lintels over 1.5m span complete. |
| 55 | M&L for preparation of new plastered surfaces of walls and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over and including 1.5mm thick wall care putty |
| 56 | M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted, over one layer wall care putty (1.50mm thick) (birla white or JK) over one coat of alkali resistant priming paint |
| 57 | M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete. |
| 58 | M&L for finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied over and including priming coat of exterior primer applied ) over surfaces of wall complete all as specified and as per the manufacturer's instructions |
| 59 | S&F for Providing precast cement concrete louvres and jallies, 40mm thick (mea sured solid), Type B-0 1:2:4 (12.5mm graded stone aggregaate) including all mould- ings but excluding frame st and jointed in CM 1:4 complete all as specified |
| 60 | Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed complete all as specified.` |
| 61 | Material and labour PCC type C1 (1:3:6) (using 20mm graded broken stone aggregate) in foundations, filling and mass concrete, fondation to fencing posts etc complete all as specified |
| 62 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite and including 15mm thick screed bed in cement mortar 1:4 complete all as specified |
| 63 | M&L for point wiring for one light /fan point complete with 1.5 Sqmm multistranded copper conductor single core PVC insulated, IS 694 unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sunken terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes duly painted with anticorrosive paint, concealed in walls with bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sunken for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications all as specified |
| 64 | M&L for point wiring for 15A socket point complete with 2.5 Sqmm multistranded copper conductor single core PVC insulated, IS 694 unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less than 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, fabricated sunken terminal box made out of GI sheet steel not less than 1.22 mm thick for boxes duly painted with anticorrosive paint, concealed in walls with bakelite/plastic laminated sheet top cover fixed with cadmium plated iron screws for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sunken for boxes and making good to the disturbed surface of wall/floor and matching with existing specifications all as specified |
| 65 | S&F Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified |
| 66 | S&F Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified |
| 67 | S&F LED Bulk Head lights fitting 1x 9/10W, 220V AC integrated high efficiency electronic driver and surge suppressor of 4KV or more, luminaire efficiency not less than 100 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed etc connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified. |
| 68 | S&F LED lights fitting 1x 20W, 220V AC decorative box type with driver,IP 20, class I, wall/ surface mounted, integrated type with extruded aluminium housing integrated high efficiency electronic driver and surge suppressor of 4KV or more, luminaire efficiency not less than 120 lumens/watt, power factor not less than 0.90, CRI 80, THD 10%, operating range - 140 to 270 V, 50 Hz fixed connecting up with 2/3 core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories internally prewired complete all as specified. |
| 69 | Supply and Fixing Ceiling Fans complete with blades, down rods and regulator with all acessories, 230 V, 1200 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with Brushless Direct Current Motor (BLDC) pre-wired with three core cable and expandable fan hook all as specified |
| 70 | S&F ceiling rose surface backelite 65x50mm two to three terminal (ISI marked). |
| 71 | S&F MCB SPN amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity 32 Amps in the MCB DB complete with connection testing and commissioning. all as specified |
| 72 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. all as specified |
| 73 | S & F MCB DB confirming to IP 43 - IK 09 with acrylic door, 4 way double door complete with all connections -Phase, Neutral and Earthing bar and making good the disturbed surfaces.Complete all as specified |
| 74 | M&L for Earthing complete with galvanized steel earth plate electrode electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less then 2.25m deep below normal ground level ) with top edge of plate not less than 1.5m below normal ground level connecting to the galvanized iron earth lead 4mm dia , by means of bolts , nuts, check nuts and washer of galvanized iron and 4mm dia GI earth wire protected by provision of GI medium grade pipe 15mm upto 7.5 mtr bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40mm thick cover of PCC (1:2:4) with bar handle made to shape , GI light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate , common salt and charcoal filling , test point made out of bronze/Gun metal with fixing arrangements , funnel , wire mesh and excavation /earth work in hard dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 mtr , all as per electrical plate no 3 of SSR -2010 Part-I and connecting to earth test point all as specified or indicated including testing on completion. |
| 75 | Supply and laying for brick protection for protection of cable over sand cushioning cables inside the trench by using common brunt clay building bricks sub-class “B” old size brick and flat and width wise along the axis of the trench complete all as specified |
| 76 | Supply laying & testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with aluminium conductor, 11000 volts, (Earthed), grade cross sectional area 10 sq. mm, 2 core. |
| 77 | M & L for laying of GI pipe light grade across road for cable protection complete of size 40mm complete all as spd. |
| 78 | M & L for horizontal boring across the exsisting road without disturbing the road surface for inserting GI pipe complete all as specified and directed . Note:- (i) Removal of surplus soil shall be deemed to be include in the unit Rate . (ii) GI pipe will be measured and paid separately under relevant item. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 14, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Oct 28, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysOct 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender