Tender For Estimate For Repair Of Ground Water Recharge Scheme At Various Location Under Bathinda Canal And Ground Water Division
Tender Value
2.77 Lakhs
Estimated cost
Bid Submission
19 Oct 2026
9 days left
EMD
5542
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bathinda → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Estimate For Repair Of Ground Water Recharge Scheme At Various Location Under Bathinda Canal And Ground Water Division
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in1 5cm, layers with compaction including disposal of all surpluss oil as directed within lead of 30 metres. |
| 2 | Cement concrete 1:4:8 (a) with stone ballast 20mm gauge i mixing by manual means |
| 3 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth |
| 4 | 12.5 mm thick cement plaster 1:4 |
| 5 | Providing, of uP.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) complete as per specifications. (xxviii) 160mm o/d pipe of 2.5 Kgf. /sqcm |
| 6 | Supplying & Fixing of well cap having thread to fix on housing pipe complete in all respect. 200mm internal diameter |
| 7 | Supplying & Fixing of PVC bend 6\\" Dia (150mm). |
| 8 | T- Joint of PVC 6\\" Dia.(150mm dia) |
| 9 | Reinforced cement concrete M-20 mechanically batch mixed using concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 10 | Supply & Installation and fitting etc of mechanical flow meter(150 mm Dia) complete in all respects. |
| 11 | Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge).(150mm dia) |
| 12 | Cold twisted detormed (Ribbed/Tor steel) Bars (Fe500 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete |
| 13 | Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients,cutting,jointing and testing complete as per specifications. (xxviii) 160mm o/d pipe of 2.5 Kgf. /sqcm |
| 14 | Excavation by mechanical means(JCB or Hydraulicexcavator) intrenchesforpipelines with straight or open cutting in streets or openarea including trimming anddressing sides levelling of bedsof trenches tocorrect grade, cutting joint holes, refilling consolidation,watering, including thecost of dewateringof rainwater,diversionfor traffic, night signals. providing & fixing caution boards, crossingover trenches foraccess to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the towninvolvingleadupto15mete rcompletein all respect Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 07, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysOct 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender